# Re: mesh SCSI bus locks hard on 7500 when burning a CD-R in dao mode

- From: Daniel Eisenbud \<hidden\>
- Date: 2001-01-28 00:59:24 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2001/01/9374871
- Thread: https://ratatoskr.run/linuxppc-dev/2001/01/9374871/t.md

```text

On Sat, Jan 27, 2001 at 04:31:15PM -0500, Daniel Eisenbud [ref] wrote:
> On Fri, Jan 26, 2001 at 10:32:35PM +0100, Michael Schmitz [ref] wrote:
> > # same to a separate screen
> > *.info;mail.none;authpriv.none;local0.none		/dev/tty7
> >
> > is what keeps a not-too-cluttered log (copy of /var/log/messages) on tty7
> > of our server. kern.notice to some tty would probably be enough for you.
> >
> > > and not to any files so syslogd won't freeze when SCSI goes?  Is there
> >
> > So put just that one line redirecting log output to /dev/tty7 into
> > syslog.conf temporarily and kill -1 syslogd before starting the test.
>
> I'll try this variation in a few minutes.

This worked, but I didn't get any useful log output until I started
getting error 600 from the SCSI midlevel and errors from ext2fs.  I'm
going to try again, making sure that I have dmesg set as high as
possible, and see if I can get anything else.  Otherwise, is it time to
start scattering printk()'s around the mesh driver?

-Daniel

--
Daniel E. Eisenbud
eisenbud@cs.swarthmore.edu

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
```