quad 604 SMP update

3 messages, 3 authors, 2001-01-23 · open the first message on its own page

quad 604 SMP update

From: Taylor Holliday <hidden>
Date: 2001-01-23 07:17:09

Started removing DIMMS - and the machine booted :-).

Any idea why total bogomips would say 11.96 when it should be 1196?

[root@localhost /root]# cat /proc/cpuinfo
processor       : 0
cpu             : 604
clock           : 150MHz
revision        : 3.5
bogomips        : 299.50

processor       : 1
cpu             : 604
clock           : 150MHz
revision        : 3.5
bogomips        : 299.50

processor       : 2
cpu             : 604
clock           : 150MHz
revision        : 3.5
bogomips        : 299.50

processor       : 3
cpu             : 604
clock           : 150MHz
revision        : 3.5
bogomips        : 299.50

total bogomips  : 11.96
zero pages      : total: 0 (0Kb) current: 0 (0Kb) hits: 0/0 (0%)
machine         : Power Macintosh
motherboard     : AAPL,9500 MacRISC
L2 cache        : 512K unified
memory          : 192MB
pmac-generation : OldWorld

------- and here's the dmesg ----------

Total memory = 192MB; using 1024kB for hash table (at c0300000)
Linux version 2.4.1-pre9 (holliday@localhost) (gcc version 2.95.3 20001130
(prerelease/franzo/20001204)) #2 SMP Sun Jan 21 20:00:36 EST 2001
Cache coherency enabled for bandit/PSX at f2000000
Found Bandit PCI host bridge at 0xf2000000. Firmware bus number: 0->0
Cache coherency enabled for bandit/PSX at f4000000
Found Bandit PCI host bridge at 0xf4000000. Firmware bus number: 1->1
On node 0 totalpages: 49152
zone(0): 49152 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:  video=ofonly
System has 32 possible interrupts
GMT Delta read from XPRAM: 0 minutes, DST: off
via_calibrate_decr: ticks per jiffy = 125003 (750020 ticks)
Console: colour dummy device 80x25
Calibrating delay loop... 299.00 BogoMIPS
Memory: 188772k available (1652k kernel code, 1012k data, 268k init, 0k
highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Entering SMP Mode...
Processor 1 found.
Processor 2 found.
Processor 3 found.
PCI: Probing PCI hardware
Fixup mem res, dev: 0.f, res_start: 81400000->81400000
Fixup mem res, dev: 0.f, res_start: 81000000->81000000
Fixup mem res, dev: 0.f, res_start: 80c00000->80c00000
Fixup mem res, dev: 0.f, res_start: 80800000->80800000
Fixup mem res, dev: 0.f, res_start: 81800000->81800000
Fixup mem res, dev: 0.f, res_start: 81810000->81810000
Fixup mem res, dev: 0.10, res_start: f3000000->f3000000
PCI: Resource 81400000-817fffff (f=1208, d=0, p=0)
PCI: Resource 81000000-813fffff (f=1208, d=0, p=0)
PCI: Resource 80c00000-80ffffff (f=200, d=0, p=0)
PCI: Resource 80800000-80bfffff (f=200, d=0, p=0)
PCI: Resource 81800000-8180ffff (f=200, d=0, p=0)
PCI: Resource 00000400-000004ff (f=101, d=0, p=0)
PCI: Resource f3000000-f301ffff (f=200, d=0, p=0)
Macintosh CUDA driver v0.5 for Unified ADB.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
MacOS display is /bandit/formacGA4
Using unsupported 640x480 formacGA4 at 81400000, depth=8, pitch=640
Console: switching to colour frame buffer device 80x30
fb0: Open Firmware frame buffer device on /bandit/formacGA4
input0: Macintosh mouse button emulation
pty: 256 Unix98 ptys configured
block: queued sectors max/low 125114kB/93836kB, 384 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: enabling 8 loop devices
eth0: MACE at 08:00:07:ef:c9:9c, chip revision 9.64
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
SCSI subsystem driver Revision: 1.00
scsi0 : MESH
mesh: target 0 synchronous at 5.0 MB/s
  Vendor: QUANTUM   Model: FIREBALL SE8.4S   Rev: PJ0A
  Type:   Direct-Access                      ANSI SCSI revision: 02
mesh: target 3 synchronous at 4.2 MB/s
  Vendor: SONY      Model: CD-ROM CDU-76S    Rev: 1.1a
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi1 : 53C94
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 16777215 512-byte hdwr sectors (8590 MB)
Partition check:
 sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sr4146: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Macintosh non-volatile memory driver v1.0
adb devices: [2]: 2 2 [3]: 3 1
ADB keyboard at 2, handler set to 3
Detected ADB keyboard, type ANSI.
input1: ADB HID on ID 2:2.02
ADB mouse at 3, handler set to 2
input2: ADB HID on ID 3:3.01
keybdev.c: Adding keyboard: input1
mouse0: PS/2 mouse device for input2
mouse1: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
event0: Event device for input2
event1: Event device for input1
event2: Event device for input0
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 16Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 268k init 4k chrp 36k prep
Adding Swap: 131120k swap-space (priority -1)

thanks all
- Taylor


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: quad 604 SMP update

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2001-01-23 08:30:31

Started removing DIMMS - and the machine booted :-).

Any idea why total bogomips would say 11.96 when it should be 1196?
Mark is having the same issue, I'll look into it.

Note that the DIMMs might or might not be the reason of the problem.
Please tell me what PCI hardware you have in the box (and also, try with
other DIMMs...)

Ben.


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: quad 604 SMP update

From: Brad Boyer <hidden>
Date: 2001-01-23 18:01:00

Benjamin Herrenschmidt wrote:
quoted
Started removing DIMMS - and the machine booted :-).

Any idea why total bogomips would say 11.96 when it should be 1196?
Mark is having the same issue, I'll look into it.

Note that the DIMMs might or might not be the reason of the problem.
Please tell me what PCI hardware you have in the box (and also, try with
other DIMMs...)
I don't have a quad CPU machine, but my 7600 when upgraded to a dual 200MHz
board had similar trouble. It has trouble booting Linux if I have all of
the memory I have in it, or in the wrong places. However, the MacOS can
use both CPUs fine with any configuration I try. I have no PCI cards in
this machine, so that isn't the problem for me. Incidentally, the DIMMS
I have to remove are the ones Apple shipped in it.

	Brad Boyer
	flar@pants.nu


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help