Hi,
I'm trying to get my usb ports to work on my Lombard. I have 2.2.8pre17
running OK but without USB or 3-button emulation working (in console or X).
rsynced and compiled 2.2.18pre18 without problems but wind up in a kernel
panic after loading the adb mouse handler and pty configuration (see
below). Is this a problem with the new input layer (I don't seem to have
/dev/input/) or a problem with the Lombard's usb ports?
Thanks for any replies.
Jon
snip
...
ADB MOUSE @ 3 handler set to 4 (trackpad)
pty:256 unix98 ptys configured {Normal boot up to this point}
machine check in kernel mode (regs at c025fe00)
Caused by (from srr1): unknown values in srr1
NIP: C016C2B0 XER: 20000000 LR: C016c238 regs: c025fe00 TRAP: 0200
MSR: 00009030 [EE, IR, DR, ME]
TASK=c025e000[1] 'swapper' mm->pgd c0146000 last syscall: 120
...
etc.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
I'm trying to get my usb ports to work on my Lombard. I have 2.2.8pre17
running OK but without USB or 3-button emulation working (in console or X).
rsynced and compiled 2.2.18pre18 without problems but wind up in a kernel
panic after loading the adb mouse handler and pty configuration (see
below). Is this a problem with the new input layer (I don't seem to have
/dev/input/) or a problem with the Lombard's usb ports?
Neither. I use a self compiled 2.2.18 and there's no such problem. At the
time where you see the panic, the kernel doesn't yet know about the root
filesystem, and consequently doesn't know about /dev/input/ either. What
sort of USB mouse are you using? Do you have both ADB mouse and USB HID
support configured?
Michael
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
I'm trying to get my usb ports to work on my Lombard. I have 2.2.8pre17
running OK but without USB or 3-button emulation working (in console or X).
rsynced and compiled 2.2.18pre18 without problems but wind up in a kernel
panic after loading the adb mouse handler and pty configuration (see
below). Is this a problem with the new input layer (I don't seem to have
/dev/input/) or a problem with the Lombard's usb ports?
Thanks for any replies.
Jon
snip
...
ADB MOUSE @ 3 handler set to 4 (trackpad)
pty:256 unix98 ptys configured {Normal boot up to this point}
machine check in kernel mode (regs at c025fe00)
Caused by (from srr1): unknown values in srr1
NIP: C016C2B0 XER: 20000000 LR: C016c238 regs: c025fe00 TRAP: 0200
MSR: 00009030 [EE, IR, DR, ME]
TASK=c025e000[1] 'swapper' mm->pgd c0146000 last syscall: 120
...
When reporting a panic like that, you should also lookup in your System.map
where those various addresses are, or your report is useless.
The important ones are the NIP, LR and addresses in the backtrace.
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/