Hi
I have now successfully gotten Linux running on a custom 823e board,
using Monta Vista CDK 1.2, Linux version 2.2.14. I am using an NFS
root file system and I have created a custom lsp for the board.
Our board uses the 823 LCD controller for a 640x480 TFT display.
I would like to activate the 823 LCD driver and try out the Microwindows
demo from Monta Vista, but I do not know what needs to be done.
When I configure the kernel with CONFIG_RPXLCD, I get a lot of
undefined symbols when linking the kernel, such as fb_display,
fb_default_cmap.
Can anyone point me in the right direction ?
Regards,
Jon Benediktsson
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
On Thu, 28 Sep 2000, jonb@marel.is wrote:
I have now successfully gotten Linux running on a custom 823e board,
using Monta Vista CDK 1.2, Linux version 2.2.14. I am using an NFS
root file system and I have created a custom lsp for the board.
Our board uses the 823 LCD controller for a 640x480 TFT display.
I would like to activate the 823 LCD driver and try out the Microwindows
demo from Monta Vista, but I do not know what needs to be done.
When I configure the kernel with CONFIG_RPXLCD, I get a lot of
undefined symbols when linking the kernel, such as fb_display,
fb_default_cmap.
The 823 LCD driver in CDK 1.2 is a standard framebuffer device, so you
need to select some of the framebuffer configuration options. Take a
look at the config file for the Linuxplanet LSP.
--
Joe Green [off-list ref]
MontaVista Software, Inc.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
jonb@marel.is wrote:
Hi
I have now successfully gotten Linux running on a custom 823e board,
using Monta Vista CDK 1.2, Linux version 2.2.14. I am using an NFS
root file system and I have created a custom lsp for the board.
Our board uses the 823 LCD controller for a 640x480 TFT display.
I would like to activate the 823 LCD driver and try out the Microwindows
demo from Monta Vista, but I do not know what needs to be done.
When I configure the kernel with CONFIG_RPXLCD, I get a lot of
undefined symbols when linking the kernel, such as fb_display,
fb_default_cmap.
Can anyone point me in the right direction ?
Enable framebuffer support in the kernel configuration.
Matthew Locke
Montavista Software
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/