RE: NFS problem

This is the problem with the ethernet driver. Make sure you have enabled the
Ethernet Transciever. You need to add code in enet.c to enable the
transciever and set the TENA bit.

Hope this helps,

- Shantha

-> -----Original Message-----
-> From: Navin Boppuri [mailto:nboppuri@trinetcommunication.com]
-> Sent: Friday, May 26, 2000 6:58 PM
-> To: linuxppc-embedded@lists.linuxppc.org
-> Subject: NFS problem
->
->
->
-> Hello,
->
-> I am trying to boot my custom board with the linux 2.2.13
-> kernel. It boots
-> OK but when it tries to do the NFS mount, it fails.......
-> This is how it
-> looks. I dont understand what's going on. I testing the NFS
-> server with some
-> other board and same ip's and it works fine. Any ideas????
->
-> lcd_lcvcr: 78000
-> loop: registered device at major 7
-> eth0: CPM ENET Version 0.2, 08:00:22:50:70:63
-> PPP: version 2.3.10 (demand dialling)
-> TCP compression code copyright 1989 Regents of the
-> University of California
-> PPP line discipline registered.
-> Looking up port of RPC 100003/2 on 216.118.31.76
-> neighbour table overflow
-> neighbour table overflow
-> neighbour table overflow
-> eth0: transmit timed out.
->  Ring data dump: cur_tx ff0028d0 (full) cur_rx ff0028c8.
-> dc00 002a 0015c642
-> dc00 002a 0015c6e2
-> dc00 002a 0015c782
-> dc00 002a 0015c962
-> dc00 002a 0015ca02
-> dc00 002a 0015caa2
-> dc00 002a 0015c502
-> fc00 002a 0015cb42
-> 9c00 005a 00174000
-> 9c00 0076 00174800
-> 9c00 0076 00161000
-> 9c00 0076 00161800
-> 9c00 0040 00160000
-> 9c00 0040 00160000
-> 9c00 0076 0015f000
-> b000 7edd 0015f800
-> eth0: tx queue full!.
-> neighbour table overflow
-> eth0: transmit timed out.
->
-> and it goes on and on. After some time, it says server
-> returned error -5 and
-> then tries a reboot. What's going on???
->
-> Navin.
->
->

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Hello,
I'm a newcomer. Help me, pls.

Now I want to strip down the size of the library glibc 2.1.3 to make it only
support my application.
Is there anyone teach me about the glibc or where I can have the information
about it.

I've visited Graham Stoney's webpage  at ncbi, and  mmporter's webpage.
I've just built glibc 2.1.3 and I think that I must look into the source code
of it.
But can you tell me the general information about the lib such as what is the
structure of the lib?
what does libc-2.1.3.so support?
what does the other lib support? .. etc..
what is the relationship between them?
is there any web size or any document written about how to reduce the size of
the glibc?

I'm sorry if my question is too simple, because I've just worked with linux for
2 months.
thank in advance.
Jari


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/