Re: Xfree86-4.0.1, Lombard, Been There - Done That
From: Jon Erick Ween <hidden>
Date: 2000-09-28 04:51:47
jeramy b smith [off-list ref] wrote:
For the 80th and last time. Get the XF86Config.pismo from howarths
directory. Well, that's where I started. But, this being the 80th time around, I'll go back and try again. Funny how small things can send you off track sometimes.
Switch the references from rage128 to ati. Copy this file to /etc/X11/XF86Config . The timings will work. I am not using the latest
version
of the ati driver (X) but mine works. When booting a recent kernel with yaboot, you should not have to specify video= on a lombard. It will by
default
use 1024x768 60hz and atyfb. If you are not getting a cursor, I would bet
You
either gummed something up in your .config or you are specifying
uneccessary
video options.
Actually, I just discovered the cursor is black. Moving the mouse cursor (gdm) over it brings it out. Must be a color setting that's off.
Also make sure you aren't telling yaboot to use "novideo".
I really didn't specify anything manually, just installed the generic yaboot with mkofboot first and then ybin as I referenced new kernel images. I'll go back an look at the .config file and see.
If you are not getting a cursor after verifying that, use one of Ben's precompiled kernels. I am using one of his older precompiled kernels (with
direct boot ati accel fixed), the ati driver from a month ago, xf401 from franz's rpms, and a slightly edited XF86Config file that used the pismo
file
as a template. The only bug I have is that i get a few blue garbage
pixels
when areas with blue in them redraw. -Jeramy
Thanks Jon
quoted
OK, I've switched from BootX to Yboot using a stable 2.2.17 kernel and
the
quoted
most recent XF86-4.0.1 and ati driver sources I can find. I seem to get different PCI assignments to the ATI chip on boot-up (looking at dmesg compared with using BootX) but the X-server still doesn't detect the
chip
quoted
with "startx" or "XFree86" and exits with a "device not found" and "no screens" error. Any further suggestions? Thanks Jon -- Jon Erik Ween, MD Cognitive and Cerebrovascular Neurology Assistant Professor Loma Linda University School of Medicine Director, Stroke Program Loma Linda University Medical Center
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/