MPC8260 boards with Linux support ?

Can anyone suggest an 8260 development board that is supported by the
Linux/PPC kernels.
Does the 2.2.X series support 8260 or would I have to go to the 2.3.X or
2.4 series ?

Thanks,
Brendan Simon.

PS. Please CC me directly as well as to the list.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Can anyone suggest an 8260 development board that is supported by the
Linux/PPC kernels.

EST SBC8260

http://www.estc.com/products/boards/SBC8260-8240_ds.html

Does the 2.2.X series support 8260 or would I have to go to the

2.3.X or > 2.4 series ?

You need to run the 2.4.x kernel to get the latest support.  I have
2.4.0-test7 runing on the SBC8260, but 2.4.0-test8-pre1 panics during
startup.  I have been getting my kernels from the Linux/PPC BitKeeper
Repository at FSMLabs (http://www.fsmlabs.com/linuxppcbk.html).

For a nice packaged solution, I would go to MontaVista
(http://www.mvista.com/) and get the Linux Support Package from the
CDK version 1.2 (http://www.mvista.com/cdk1.2/) for the SBC8260.

ftp://ftp.mvista.com/pub/CDK/1.2/latest/PowerPC/ppc_82xx/RPMS

Look for *sbc8260*

------------------\\----------------------\\----------------------------
Jon Diekema        |                       | Smiths Industries
(616) 241-8310     |                       | 3290 Patterson Avenue, SE
diekema_jon@si.com \\                      \\  Grand Rapids, MI 49512-1991

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Monta Vista has the 2.4.0 kernel running on EST's SBC8260 board.

Monta Vista's documentation says that you need their ROM monitor (I think
it's called RMON) programmed into the board's flash memory in order to boot
Linux, but we were able to get it running under EST's monitor (visionWare)
with the help of about 20 lines of assembly code.

Scott

-----Original Message-----
From: owner-linuxppc-embedded@lists.linuxppc.org
[mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of Brendan
Simon
Sent: Wednesday, August 30, 2000 9:31 PM
To: linuxppc-embedded
Subject: MPC8260 boards with Linux support ?



Can anyone suggest an 8260 development board that is supported by the
Linux/PPC kernels.
Does the 2.2.X series support 8260 or would I have to go to the 2.3.X or
2.4 series ?

Thanks,
Brendan Simon.

PS. Please CC me directly as well as to the list.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Scott Howard wrote:

Monta Vista's documentation says that you need their ROM monitor

No.  The documentation describes the use of the software when _using_
that rom monitor.  We had to choose something and it is impossible
to properly document an arbitrary set of tools for a board that arrives
without any useful software installed.  There seems to be as many
different methods as people using these boards.

If you purchase the software subscription, MontaVista will also
program your SIMM so you are ready to go (no need to purchase the
expensive JTAG tools).  Of course, the monitor is also available for
you to use as you wish.


	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/