Re: internal speakers on Pismo

Hi Ben,

Ok, I got it working here too. I've pushed changes in my rsync tree
(dmasound 2.2, I'll take care of 2.4 later, I'll send you patches, Iain).

:-)

Basically, clearing the additional registers is not what made it work as
I originally expected ! What made it work was _not_ to enable the
parallel port output. However, it is needed on some machines. So what I
did was to enable it conditionally in a way similar to what Darwin does.

In some of the Apple code there is a statement about initial reg. states.  I
was intending to check that we had got these set - however, what you've put
here makes me wonder if that'll break something else.

I also fixed up detection of screamer chips.

Thanks, that was top of my list of things to do...

Oddly, the master volume doesn't work (but the speaker volume does).

Hmmm... master vol works OK on the G3 minitower - but not on the 9600 or the
Lombard (IIRC both AWACS V2)

Also, Apple code has some weird thing: They detect two different device-
id's for new iMacs (DV/SE). One is an inverted version. But they only
enable the parallel output one of them. I don't know if it's normal or if
it's actually a bug in their code. I did the same thing but left the case
of normal iMacDV in comments, so users of this machine can try and see if
it helps. I suspect that like other iMacs, there's an I2C amplifier/SRS
module that needs to be setup too, but I'm not completely sure.

I FW'd a copy of our summary the other day to the guy working on I2C - no
reply get.

Iain.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/