Re: 2.4.0-t1 & t3: dmasound

[snip]

} Happy to try & fix - but it would be useful to know whether there are *any*
} conditions under which it has worked.

This is on a Performa 6400.

linux% cat /dev/sndstat
PowerMac (AWACS rev 2) DMA sound driver:
 sound.format = 0x20 (signed 16 bit big)
 sound.speed = 44100Hz (phys. 44100Hz)
 sound.stereo = 0x1 (stereo)
 sq.block_size = 32768 sq.max_count = 4 sq.max_active = 4
 sq.count = 0 sq.rear_size = 12288
 sq.active = 0 sq.syncing = 0

linux% uname -a
Linux c22234-c.scllg1.pa.home.com 2.4.0-test1-ac21 #1 Wed Jun 21 23:15:08
EDT 2000 ppc unknown

The source is from Paul's developent tree.

I've compiled sound support in rather than as a module.  It works, but
the only way to control the volume is by using the Gnome mixer.  On
anything else I've tried (xmms, the CD player that comes with Gnome,
reaplayer), the volume sliders don't work.  But the sound is fine.

thnx v. much - I've a hunch we're not getting any interrupts...
still investigating...

Iain

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/