About redwood

Ben,

It is great to get your msg. Yes, my board is
redwood3.
It has these components:

� Philips IC (Smartcard) Card Interfaces (TDA8002 and
TDA8004)
� Crystal Semiconductor Multi Standard Infrared
Transceiver (CS8130)
� 4M x 16 DRAM Chips (2 components are used for 32 bit
mode, 1 for 16 bit mode)
� SDRAM Memory Chips (4M x 16, 2 chips)
� 2 AMD Am29F800B 1MB Flash ROMs for a total of 2 MB
(socket for 1 Flash in 16 bit
mode)
� National Ethernet Controller (DP83902AV)
� Programmable Logic
� Xilinx FPGA (XC5210 and XC3142)
� PLD (XC9536) - controls IDE and Ethernet interfaces
� Xicor 2KB I2C EEPROM (X24165S)
� 27 MHz VCXO
� IBM31T1100A IR transceiver
� Siemens SFH 506-38: IR receiver/38 KHz demodulator
� MAXIM MAX562: Serial RS-232 level conversion for
16550 UART2
� Rockwell 2400 baud socket modem SF224ATF
� ATMEL AT45D021 2MB Serial FLASH

I am looking forward to your further help.

Wentao


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/