Re: Lite-On ethernet controller

On Wed, May 31, 2000 at 08:40:57PM +0200, Michel Lanners wrote:

00:05.0 Ethernet controller: Lite-On Communications Inc: Unknown device c115 (rev 25)
        Subsystem: Asante Technologies, Inc.: Unknown device f001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 8 min, 56 max, 32 set, cache line size 08
        Interrupt: pin A routed to IRQ 30
        Region 0: I/O ports at 1c00 [size=256]
                  ^^^^^^^^^    ^^^^
        Region 1: Memory at c3002000 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at c1240000 [disabled] [size=256K]

The IO port region above might be your problem. What machine type is
this? Do you have any ISA slots in your machine? Form the i8259
interrupt controller I deduce it's not a PowerMac...

It's not a powermac...it's a CHRP Longtrail board.  Geert's board has an ISA
slot, and I believe mine has all the hardware for an ISA slot, except the
actual slot was removed.

Geert, how did you get the tulip-diag program to compile on your chrp
machine?  I'd like to give it a try and see what it tells me.

Have you looked at the driver whether it runs on IO ports or
memory-mapped? Since the two regions above probably represent different
views on the same register file, I'd go memory-mapped (i.e. using region
1 above), if possible.

How would I check this?  Perhaps Jeff knows this? :)

What's the next step for debugging this?

Now, as for possible buggy motherboards, wouldn't other PCI devices have
trouble?  Perhaps network cards just show the problem becuase of the high
interrupt delivery rate?

I've got other PCI cards in this machine, and haven't had any trouble with
them:
00:00.0 Host bridge: VLSI Technology Inc VAS96011 [Golden Gate II] (rev 14)
00:01.0 ISA bridge: Symphony Labs W83C553 (rev 05)
00:01.1 IDE interface: Symphony Labs SL82c105 (rev 05)
00:02.0 Class ff00: Apple Computer Inc. Hydra Mac I/O (rev 03)
00:03.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a)
00:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
00:05.0 Ethernet controller: Lite-On Communications Inc: Unknown device c115 (rev 25)
00:06.0 SCSI storage controller: Adaptec AIC-7881U

Josh

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

On Thu, 1 Jun 2000, Josh Huber wrote:

On Wed, May 31, 2000 at 08:40:57PM +0200, Michel Lanners wrote:

quoted

00:05.0 Ethernet controller: Lite-On Communications Inc: Unknown device c115 (rev 25)
        Subsystem: Asante Technologies, Inc.: Unknown device f001
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 8 min, 56 max, 32 set, cache line size 08
        Interrupt: pin A routed to IRQ 30
        Region 0: I/O ports at 1c00 [size=256]
                  ^^^^^^^^^    ^^^^
        Region 1: Memory at c3002000 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at c1240000 [disabled] [size=256K]

The IO port region above might be your problem. What machine type is

I/O port is OK, since the card does work most of the time.

quoted

this? Do you have any ISA slots in your machine? Form the i8259
interrupt controller I deduce it's not a PowerMac...

It's not a powermac...it's a CHRP Longtrail board.  Geert's board has an ISA
slot, and I believe mine has all the hardware for an ISA slot, except the
actual slot was removed.

CHRP LongTrail has ISA. Interrupts are controlled by an OpenPIC master, and the
traditional dual i8259 cascade as a slave.

Geert, how did you get the tulip-diag program to compile on your chrp
machine?  I'd like to give it a try and see what it tells me.

By pathing it to map ISA I/O space :-) I mailed the patch to you.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/