Dan,
When will you release the patch: PCMCIA for mpc8xx-linux 2.2.13?
It seems that you have completed the work.
The David Hinds's pcmcia-cs and Magnus's patch even
could not pass the compiling.
=============================================================
make[1]: Entering directory `/home/sjzhu/tmp/pcmcia-cs-3.1.10/modules'
powerpc-linux-gcc -fno-builtin -msoft-float -ffixed-r2 -MD -O2 -Wall -Wstri
ct-p
rototypes -pipe -I../include -I/home/sjzhu/linux-2.2.13-embedded/include -D
__KE
RNEL__ -DMODULE -c cs.c
In file included from ../include/pcmcia/k_compat.h:105,
from cs.c:35:
/home/sjzhu/linux-2.2.13-embedded/include/linux/module.h:19:
linux/modversions.h
: No such file or directory
==============================================================
For the kernel, Magnus said that I must modify the kernel, following is the
error:
----------------------------------------------------------------------------
----
make[1]: Entering directory
`/home/sjzhu/linux-2.2.13-embedded/arch/ppc/kernel'
powerpc-linux-gcc -D__KERNEL__ -I/home/sjzhu/linux-2.2.13-embedded/include -
Wall
-Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -D__power
pc__
-fsigned-char -msoft-float -pipe -fno-builtin -ffixed-r2 -Wno-uninitialized
-mm
ultiple -mstring -mcpu=860 -I../8xx_io -c -o m8xx_setup.o m8xx_setup.c
m8xx_setup.c: In function `m8xx_init':
m8xx_setup.c:536: structure has no member named `ide_request_irq'
make[1]: *** [m8xx_setup.o] Error 1
make[1]: Leaving directory
`/home/sjzhu/linux-2.2.13-embedded/arch/ppc/kernel'
make: *** [_dir_arch/ppc/kernel] Error 2
----------------------------------------------------------------------------
---------
Thanks,
Shuangjun
-----Original Message-----
From: Dan Malek <redacted>
To: Shuangjun Zhu (r44089) <redacted>
Cc: linuxppc-embedded@lists.linuxppc.org
[off-list ref];
damm@kieraypc01.p.y.ki.era.ericsson.se
[off-list ref]
Date: Monday, May 08, 2000 10:53 PM
Subject: Re: help -- PCMCIA for MPC860
Shuangjun Zhu wrote:
quoted
where can I get the code of PCMCIA-IDE for MPC8xx-linux-2.2.13?
Pieces of it are already in the kernel. Scan the mailing list
archives to get Mangus' real PCMCIA patches.
In addition to this software, you will need to make (potentially lots of)
modifications to support powering the cards, unless your hardware folks
did this for you.
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
Here at AVS, Jo-Ellen has been through all the fun of setting up PCMCIA.
She's prepared some fairly detailed notes. They can be found at:
ftp://ftp.absoval.com/pub/rpxlite/
Best of luck,
-Mark
On Tue, 9 May 2000, Shuangjun Zhu wrote:
Dan,
When will you release the patch: PCMCIA for mpc8xx-linux 2.2.13?
It seems that you have completed the work.
The David Hinds's pcmcia-cs and Magnus's patch even
could not pass the compiling.
=============================================================
make[1]: Entering directory `/home/sjzhu/tmp/pcmcia-cs-3.1.10/modules'
powerpc-linux-gcc -fno-builtin -msoft-float -ffixed-r2 -MD -O2 -Wall -Wstri
ct-p
rototypes -pipe -I../include -I/home/sjzhu/linux-2.2.13-embedded/include -D
__KE
RNEL__ -DMODULE -c cs.c
In file included from ../include/pcmcia/k_compat.h:105,
from cs.c:35:
/home/sjzhu/linux-2.2.13-embedded/include/linux/module.h:19:
linux/modversions.h
: No such file or directory
==============================================================
For the kernel, Magnus said that I must modify the kernel, following is the
error:
----------------------------------------------------------------------------
----
make[1]: Entering directory
`/home/sjzhu/linux-2.2.13-embedded/arch/ppc/kernel'
powerpc-linux-gcc -D__KERNEL__ -I/home/sjzhu/linux-2.2.13-embedded/include -
Wall
-Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -D__power
pc__
-fsigned-char -msoft-float -pipe -fno-builtin -ffixed-r2 -Wno-uninitialized
-mm
ultiple -mstring -mcpu=860 -I../8xx_io -c -o m8xx_setup.o m8xx_setup.c
m8xx_setup.c: In function `m8xx_init':
m8xx_setup.c:536: structure has no member named `ide_request_irq'
make[1]: *** [m8xx_setup.o] Error 1
make[1]: Leaving directory
`/home/sjzhu/linux-2.2.13-embedded/arch/ppc/kernel'
make: *** [_dir_arch/ppc/kernel] Error 2
----------------------------------------------------------------------------
---------
Thanks,
Shuangjun
-----Original Message-----
From: Dan Malek <redacted>
To: Shuangjun Zhu (r44089) <redacted>
Cc: linuxppc-embedded@lists.linuxppc.org
[off-list ref];
damm@kieraypc01.p.y.ki.era.ericsson.se
[off-list ref]
Date: Monday, May 08, 2000 10:53 PM
Subject: Re: help -- PCMCIA for MPC860
quoted
Shuangjun Zhu wrote:
quoted
where can I get the code of PCMCIA-IDE for MPC8xx-linux-2.2.13?
Pieces of it are already in the kernel. Scan the mailing list
archives to get Mangus' real PCMCIA patches.
In addition to this software, you will need to make (potentially lots of)
modifications to support powering the cards, unless your hardware folks
did this for you.
-- Dan
Mark S. Mathews
AbsoluteValue Systems Web: http://www.absoval.com
P.O. Box 941149 e-mail: mark@absoval.com
Maitland, FL 32794-1149 Phone: 407.644.8582
USA Fax: 407.539.1294
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/