Re: Lombard hard freeze (update: mem>64MB)

I should note that I removed my 128MB SODIMM and still
had problems with freezes. I am going to call the
company I bought my PB from and ask them whether or
not my 128MB SODIMM is low profile or high profile
only, maybe I can figure out whether or not I've got a
bad 64MB SODIMM in the low profile slot.

--- Bernhard Reiter <bernhard@intevation.de> wrote:

On Tue, May 16, 2000 at 05:01:08PM +0200, Mario
Scarpa wrote:

quoted

Bernhard Reiter wrote:

quoted

Mario Scarpa            hard freeze as

described?  64 MB + other problems

quoted

I was out for a while, now I'm back.
My config is like the following:
Lombard 400MHz with 64MB (from Apple) running

2.2.15pre20 on Debian 2.2.

quoted

I'm experiencing (seldom) freezes with this config

when I have

quoted

some heavy network activity and, even more seldom,

when the

quoted

system boots up and initialize the serial driver.
My problems started when I compiled the USB driver

into the kernel

quoted

(or, at least, began to be visible).

No problem during any compilation (and I do quite

a lot of this)...

Well with 64MB I never had freeses to far.

Chris told me that he has a 333Mhz lombard.
I have the 400 Mhz model, maybe this makes a
difference which is
more problematic when the clock speed it higher.

Jeramy, what speed does your lombard run on?
	Bernhard
--
Professional Service around Free Software
    (intevation.net)
The FreeGIS Project				            (freegis.org)
Association for a Free Informational Infrastructure
          (ffii.org)

ATTACHMENT part 2 application/pgp-signature

=====
Gabriel Ricard
g_ricard@yahoo.com


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/