Re: Synchronous SCSI at 10MB/s on Lombard? (fwd)

far on my Lombard. The throughput as reported by hdparm has
effectively
doubled (from 3.3 to 6.6 MB/s), so does anyone know whether this is
safe or there are any dangers implied when setting the transfer rate
that
high (if it only you could call this high!) on the external bus?

	I second the question.  And what does "safe" mean?  Could these
aggressive settings damage your data, your hardware, or both?  If it's
just data, then that's okay for me to try.  I'll turn it off when I
find corrupted data.
	Thanks!

=====
"Don't expect your own messiah; this neverworld which you desire is
only in your mind." -- http://www.dreamtheater.net/songb4.htm#IV5


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/