[PATCH] wifi: realtek: fix typos in comments

@@ -982,7 +982,7 @@
 #define REG_NHM_TH3_TO_TH0_8723B	0x0898
 #define REG_NHM_TH7_TO_TH4_8723B	0x089c
 
-#define REG_FPGA0_XA_LSSI_READBACK	0x08a0	/* Tranceiver LSSI Readback */
+#define REG_FPGA0_XA_LSSI_READBACK	0x08a0	/* Transceiver LSSI Readback */
 #define REG_FPGA0_XB_LSSI_READBACK	0x08a4
 #define REG_FPGA0_PSD_REPORT		0x08b4
 #define REG_HSPI_XA_READBACK		0x08b8	/* Transceiver A HSPI read */

@@ -1271,7 +1271,7 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
 			tcb_desc->disable_ratefallback = 1;
 		} else {
 			/*
-			 *because hw will nerver use hw_rate
+			 *because hw will never use hw_rate
 			 *when tcb_desc->use_driver_rate = false
 			 *so we never set highest N rate here,
 			 *and N rate will all be controlled by FW

@@ -1667,7 +1667,7 @@ static void btc8192e2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
 		n = 3;
 		wait_cnt = 0;
 	} else {
-		/* accquire the BT TRx retry count from BT_Info byte2 */
+		/* acquire the BT TRx retry count from BT_Info byte2 */
 		retry_cnt = coex_sta->bt_retry_cnt;
 		rtl_dbg(rtlpriv, COMP_BT_COEXIST, DBG_LOUD,
 			"[BTCoex], retry_cnt = %d\n", retry_cnt);

@@ -1894,7 +1894,7 @@ static void btc8723b2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
 		result = 0;
 		wait_count = 0;
 	} else {
-		/*accquire the BT TRx retry count from BT_Info byte2*/
+		/*acquire the BT TRx retry count from BT_Info byte2*/
 		retry_count = coex_sta->bt_retry_cnt;
 
 		if ((coex_sta->low_priority_tx) > 1050 ||

@@ -1780,7 +1780,7 @@ static void btc8821a2ant_tdma_duration_adjust(struct btc_coexist *btcoexist,
 		result = 0;
 		wait_count = 0;
 	} else {
-		/* accquire the BT TRx retry count from BT_Info byte2 */
+		/* acquire the BT TRx retry count from BT_Info byte2 */
 		retry_count = coex_sta->bt_retry_cnt;
 		rtl_dbg(rtlpriv, COMP_BT_COEXIST, DBG_LOUD,
 			"[BTCoex], retry_count = %d\n", retry_count);

@@ -608,7 +608,7 @@ static int rtl_op_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
 			/* sleep here is must, or we may recv the beacon and
 			 * cause mac80211 into wrong ps state, this will cause
 			 * power save nullfunc send fail, and further cause
-			 * pkt loss, So sleep must quickly but not immediatly
+			 * pkt loss, So sleep must quickly but not immediately
 			 * because that will cause nullfunc send by mac80211
 			 * fail, and cause pkt loss, we have tested that 5mA
 			 * is worked very well */

@@ -1711,7 +1711,7 @@ static void rtl_op_rfkill_poll(struct ieee80211_hw *hw)
 }
 
 /* this function is called by mac80211 to flush tx buffer
- * before switch channle or power save, or tx buffer packet
+ * before switch channel or power save, or tx buffer packet
  * maybe send after offchannel or rf sleep, this may cause
  * dis-association by AP */
 static void rtl_op_flush(struct ieee80211_hw *hw,

@@ -18,7 +18,7 @@
 /*#define DBG_EMERG			0 */
 
 /*
- *Abnormal, rare, or unexpeted cases.
+ *Abnormal, rare, or unexpected cases.
  *For example, Packet/IO Ctl canceled,
  *device suprisely unremoved and so on.
  */

@@ -879,7 +879,7 @@ static void dm_txpower_track_cb_therm(struct ieee80211_hw *hw)
 		{0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25, 25, 25}
 	};
 
-	/*Initilization (7 steps in total) */
+	/*Initialization (7 steps in total) */
 	rtlpriv->dm.txpower_trackinginit = true;
 	rtl_dbg(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
 		"%s\n", __func__);

@@ -1090,7 +1090,7 @@ int rtl88ee_hw_init(struct ieee80211_hw *hw)
 	rtl88e_phy_mac_config(hw);
 	/* because last function modify RCR, so we update
 	 * rcr var here, or TP will unstable for receive_config
-	 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+	 * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
 	 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
 	 */
 	rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);

@@ -1891,7 +1891,7 @@ static void _rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw,
 		rtl_set_bbreg(hw, 0x914, MASKLWORD, 0x0201);
 
 		/* We use the RF definition of MAIN and AUX,
-		 * left antenna and right antenna repectively.
+		 * left antenna and right antenna respectively.
 		 * Default output at AUX.
 		 */
 		if (bmain) {

@@ -5,7 +5,7 @@
 #define __RTL92C_PHY_H__
 
 /* MAX_TX_COUNT must always set to 4, otherwise read efuse
- * table secquence will be wrong.
+ * table sequence will be wrong.
  */
 #define		MAX_TX_COUNT				4
 

@@ -14,7 +14,7 @@
  *	4: LPS--Low Power State
  *	5: SUS--Suspend
  *
- *	The transision from different states are defined below
+ *	The transition from different states are defined below
  *	TRANS_CARDEMU_TO_ACT
  *	TRANS_ACT_TO_CARDEMU
  *	TRANS_CARDEMU_TO_SUS

@@ -609,7 +609,7 @@
 #define	HWSET_MAX_SIZE				512
 #define   EFUSE_MAX_SECTION			64
 #define   EFUSE_REAL_CONTENT_LEN			256
-/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte.*/
+/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte.*/
 #define		EFUSE_OOB_PROTECT_BYTES		18
 
 #define	EEPROM_DEFAULT_TSSI					0x0

@@ -432,7 +432,7 @@ bool rtl88ee_rx_query_desc(struct ieee80211_hw *hw,
 
 	/* hw will set status->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame.
-	 * So hw will not decryption robust managment frame
+	 * So hw will not decryption robust management frame
 	 * for IEEE80211w but still set status->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -952,7 +952,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
 	rtl92c_phy_mac_config(hw);
 	/* because last function modify RCR, so we update
 	 * rcr var here, or TP will unstable for receive_config
-	 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+	 * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
 	 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
 	rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
 	rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);

@@ -302,7 +302,7 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
 
 	/* hw will set stats->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame.
-	 * So hw will not decryption robust managment frame
+	 * So hw will not decryption robust management frame
 	 * for IEEE80211w but still set status->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -1051,7 +1051,7 @@
 /* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
 /* 3. RF register 0x00-2E */
 /* 4. Bit Mask for BB/RF register */
-/* 5. Other defintion for BB/RF R/W */
+/* 5. Other definition for BB/RF R/W */
 
 /* 3. Page8(0x800) */
 #define	RFPGA0_RFMOD				0x800

@@ -644,7 +644,7 @@ int rtl92de_hw_init(struct ieee80211_hw *hw)
 	rtl92d_phy_mac_config(hw);
 	/* because last function modify RCR, so we update
 	 * rcr var here, or TP will unstable for receive_config
-	 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+	 * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
 	 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
 	rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
 	rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);

@@ -764,7 +764,7 @@ static void _rtl92du_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 		    rtlhal->interfaceindex == 1) {
 			need_pwr_down = rtl92du_phy_enable_anotherphy(hw, false);
 			rtlhal->during_mac1init_radioa = true;
-			/* asume no this case */
+			/* assume no this case */
 			if (need_pwr_down)
 				rtl92d_phy_enable_rf_env(hw, path,
 							 &u4regvalue);

@@ -2248,7 +2248,7 @@ static void _rtl92du_phy_reload_lck_setting(struct ieee80211_hw *hw, u8 channel)
 			bneed_powerdown_radio =
 				rtl92du_phy_enable_anotherphy(hw, false);
 			rtlpriv->rtlhal.during_mac1init_radioa = true;
-			/* asume no this case */
+			/* assume no this case */
 			if (bneed_powerdown_radio)
 				rtl92d_phy_enable_rf_env(hw, erfpath,
 							 &u4regvalue);

@@ -762,7 +762,7 @@ void rtl92ee_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
 	}
 }
 
-/*Shoud check FW support p2p or not.*/
+/*Should check FW support p2p or not.*/
 static void rtl92ee_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow)
 {
 	u8 u1_ctwindow_period[1] = {ctwindow};

@@ -2733,7 +2733,7 @@ static void _rtl92ee_phy_set_rfpath_switch(struct ieee80211_hw *hw,
 		rtl_set_bbreg(hw, 0x914, MASKLWORD, 0x0201);
 
 		/* We use the RF definition of MAIN and AUX,
-		 * left antenna and right antenna repectively.
+		 * left antenna and right antenna respectively.
 		 * Default output at AUX.
 		 */
 		if (bmain) {

@@ -15,7 +15,7 @@
  *	4: LPS--Low Power State
  *	5: SUS--Suspend
  *
- *	The transision from different states are defined below
+ *	The transition from different states are defined below
  *	TRANS_CARDEMU_TO_ACT
  *	TRANS_ACT_TO_CARDEMU
  *	TRANS_CARDEMU_TO_SUS

@@ -385,7 +385,7 @@ bool rtl92ee_rx_query_desc(struct ieee80211_hw *hw,
 
 	/* hw will set status->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame.
-	 * So hw will not decryption robust managment frame
+	 * So hw will not decryption robust management frame
 	 * for IEEE80211w but still set status->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -982,7 +982,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	/* because last function modify RCR, so we update
 	 * rcr var here, or TP will unstable for receive_config
-	 * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+	 * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
 	 * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
 	 */
 	rtlpci->receive_config = rtl_read_dword(rtlpriv, RCR);

@@ -2367,7 +2367,7 @@ bool rtl92se_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
 }
 
 /* Is_wepkey just used for WEP used as group & pairwise key
- * if pairwise is AES ang group is WEP Is_wepkey == false.*/
+ * if pairwise is AES and group is WEP Is_wepkey == false.*/
 void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 	bool is_group, u8 enc_algo, bool is_wepkey, bool clear_all)
 {

@@ -689,7 +689,7 @@ static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
 	rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
 	rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
 
-	/* Addr of LSSI. Wirte RF register by driver */
+	/* Addr of LSSI. Write RF register by driver */
 	rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
 						 RFPGA0_XA_LSSIPARAMETER;
 	rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =

@@ -711,13 +711,13 @@ static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
 	rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
 	rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
 
-	/* Tranceiver A~D HSSI Parameter-1 */
+	/* Transceiver A~D HSSI Parameter-1 */
 	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
 	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
 	rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
 	rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
 
-	/* Tranceiver A~D HSSI Parameter-2 */
+	/* Transceiver A~D HSSI Parameter-2 */
 	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
 	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
 	rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 = RFPGA0_XC_HSSIPARAMETER2;

@@ -765,13 +765,13 @@ static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
 	rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
 	rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
 
-	/* Tranceiver LSSI Readback */
+	/* Transceiver LSSI Readback */
 	rtlphy->phyreg_def[RF90_PATH_A].rf_rb = RFPGA0_XA_LSSIREADBACK;
 	rtlphy->phyreg_def[RF90_PATH_B].rf_rb = RFPGA0_XB_LSSIREADBACK;
 	rtlphy->phyreg_def[RF90_PATH_C].rf_rb = RFPGA0_XC_LSSIREADBACK;
 	rtlphy->phyreg_def[RF90_PATH_D].rf_rb = RFPGA0_XD_LSSIREADBACK;
 
-	/* Tranceiver LSSI Readback PI mode  */
+	/* Transceiver LSSI Readback PI mode  */
 	rtlphy->phyreg_def[RF90_PATH_A].rf_rbpi = TRANSCEIVERA_HSPI_READBACK;
 	rtlphy->phyreg_def[RF90_PATH_B].rf_rbpi = TRANSCEIVERB_HSPI_READBACK;
 }

@@ -303,7 +303,7 @@
 
 #define	RPWM					PCI_RPWM
 
-/* Regsiter Bit and Content definition  */
+/* Register Bit and Content definition  */
 
 #define	ISO_MD2PP				BIT(0)
 #define	ISO_PA2PCIE				BIT(3)

@@ -276,7 +276,7 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
 
 	/* hw will set stats->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame,
-	 * hw will not decrypt robust managment frame
+	 * hw will not decrypt robust management frame
 	 * for IEEE80211w but still set stats->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -466,7 +466,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
 		/* Alwasy enable all rate fallback range */
 		set_tx_desc_data_rate_fb_limit(pdesc, 0x1F);
 
-		/* Fix: I don't kown why hw use 6.5M to tx when set it */
+		/* Fix: I don't known why hw use 6.5M to tx when set it */
 		set_tx_desc_user_rate(pdesc,
 				      ptcb_desc->use_driver_rate ? 1 : 0);
 

@@ -889,7 +889,7 @@ void rtl8723e_dm_bt_set_bt_dm(struct ieee80211_hw *hw,
 
 	/* Note:
 	 * We should add delay for making sure
-	 *	sw DacSwing can be set sucessfully.
+	 *	sw DacSwing can be set successfully.
 	 * because of that rtl8723e_dm_bt_set_fw_2_ant_hid()
 	 *	and rtl8723e_dm_bt_set_fw_tdma_ctrl()
 	 * will overwrite the reg 0x880.

@@ -15,7 +15,7 @@
  *	4: LPS--Low Power State
  *	5: SUS--Suspend
  *
- *	The transision from different states are defined below
+ *	The transition from different states are defined below
  *	TRANS_CARDEMU_TO_ACT
  *	TRANS_ACT_TO_CARDEMU
  *	TRANS_CARDEMU_TO_SUS

@@ -305,7 +305,7 @@ bool rtl8723e_rx_query_desc(struct ieee80211_hw *hw,
 
 	/* hw will set status->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame.
-	 * So hw will not decryption robust managment frame
+	 * So hw will not decryption robust management frame
 	 * for IEEE80211w but still set status->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -742,7 +742,7 @@ static void rtl8723be_dm_txpower_tracking_callback_thermalmeter(
 		5, 6, 6, 6, 6, 7, 7, 7, 8, 8,  9,
 		9, 10, 10, 11, 12, 13, 14, 15};
 
-	/*Initilization ( 7 steps in total )*/
+	/*Initialization ( 7 steps in total )*/
 	rtlpriv->dm.txpower_trackinginit = true;
 	rtl_dbg(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
 		"%s\n", __func__);

@@ -15,7 +15,7 @@
  *	4: LPS--Low Power State
  *	5: SUS--Suspend
  *
- *	The transision from different states are defined below
+ *	The transition from different states are defined below
  *	TRANS_CARDEMU_TO_ACT
  *	TRANS_ACT_TO_CARDEMU
  *	TRANS_CARDEMU_TO_SUS

@@ -603,7 +603,7 @@
 #define EFUSE_MAX_SECTION		64
 #define EFUSE_REAL_CONTENT_LEN		256
 #define EFUSE_OOB_PROTECT_BYTES		18 /* PG data exclude header,
-					    * dummy 7 bytes frome CP test
+					    * dummy 7 bytes from CP test
 					    * and reserved 1byte.
 					    */
 

@@ -220,7 +220,7 @@ static void _rtl8723be_translate_rx_signal_stuff(struct ieee80211_hw *hw,
 	    (ether_addr_equal(praddr, rtlefuse->dev_addr));
 
 	/* YP: packet_beacon is not initialized,
-	 * this assignment is neccesary,
+	 * this assignment is necessary,
 	 * otherwise it counld be true in this case
 	 * the situation is much worse in Kernel 3.10
 	 */

@@ -360,7 +360,7 @@ bool rtl8723be_rx_query_desc(struct ieee80211_hw *hw,
 
 	/* hw will set status->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame.
-	 * So hw will not decryption robust managment frame
+	 * So hw will not decryption robust management frame
 	 * for IEEE80211w but still set status->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -1150,7 +1150,7 @@ u8 rtl8821ae_hw_rate_to_mrate(struct ieee80211_hw *hw, u8 rate)
 /*-----------------------------------------------------------------------------
  * Function:	odm_TxPwrTrackSetPwr88E()
  *
- * Overview:	88E change all channel tx power accordign to flag.
+ * Overview:	88E change all channel tx power according to flag.
  *				OFDM & CCK are all different.
  *
  * Input:		NONE

@@ -1546,7 +1546,7 @@ void rtl8812ae_dm_txpower_tracking_callback_thermalmeter(
 
 	if (delta > 0 && rtldm->txpower_track_control) {
 		/* "delta" here is used to record the
-		 * absolute value of differrence.
+		 * absolute value of difference.
 		 */
 		delta = thermal_value > rtlefuse->eeprom_thermalmeter ?
 			(thermal_value - rtlefuse->eeprom_thermalmeter) :

@@ -1829,7 +1829,7 @@ static void rtl8821ae_get_delta_swing_table(struct ieee80211_hw *hw,
 /*-----------------------------------------------------------------------------
  * Function:	odm_TxPwrTrackSetPwr88E()
  *
- * Overview:	88E change all channel tx power accordign to flag.
+ * Overview:	88E change all channel tx power according to flag.
  *				OFDM & CCK are all different.
  *
  * Input:		NONE

@@ -2029,7 +2029,7 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter(
 	const u8 *delta_swing_table_idx_tup_a;
 	const u8 *delta_swing_table_idx_tdown_a;
 
-	/*2. Initilization ( 7 steps in total )*/
+	/*2. Initialization ( 7 steps in total )*/
 	rtl8821ae_get_delta_swing_table(hw,
 					&delta_swing_table_idx_tup_a,
 					&delta_swing_table_idx_tdown_a);

@@ -2111,7 +2111,7 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter(
 
 	if (delta > 0 && rtldm->txpower_track_control) {
 		/*"delta" here is used to record the
-		 * absolute value of differrence.
+		 * absolute value of difference.
 		 */
 		delta = thermal_value > rtlefuse->eeprom_thermalmeter ?
 			(thermal_value - rtlefuse->eeprom_thermalmeter) :

@@ -654,7 +654,7 @@ void rtl8821ae_set_fw_keep_alive_cmd(struct ieee80211_hw *hw,
 	rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD, "Enable(%d)\n", func_en);
 
 	SET_8812_H2CCMD_KEEP_ALIVE_ENABLE(keep_alive_info, func_en);
-	/* 1: the period is controled by driver, 0: by Fw default */
+	/* 1: the period is controlled by driver, 0: by Fw default */
 	SET_8812_H2CCMD_KEEP_ALIVE_ACCPEPT_USER_DEFINED(keep_alive_info, 1);
 	SET_8812_H2CCMD_KEEP_ALIVE_PERIOD(keep_alive_info, 10); /* 10 sec */
 

@@ -1019,7 +1019,7 @@ static void _rtl8821ae_hw_configure(struct ieee80211_hw *hw)
 	/* ARFB table 12 for 11ac 24G 1SS */
 	rtl_write_dword(rtlpriv, REG_ARFR3, 0x00000015);
 	rtl_write_dword(rtlpriv, REG_ARFR3 + 4, 0xffcff000);
-	/* 0x420[7] = 0 , enable retry AMPDU in new AMPD not singal MPDU. */
+	/* 0x420[7] = 0 , enable retry AMPDU in new AMPD not signal MPDU. */
 	rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F00);
 	rtl_write_byte(rtlpriv, REG_AMPDU_MAX_TIME, 0x70);
 

@@ -343,7 +343,7 @@ extern struct wlan_pwr_cfg  rtl8812_leave_lps_flow
  *	4: LPS--Low Power State
  *	5: SUS--Suspend
  *
- *	The transision from different states are defined below
+ *	The transition from different states are defined below
  *	TRANS_CARDEMU_TO_ACT
  *	TRANS_ACT_TO_CARDEMU
  *	TRANS_CARDEMU_TO_SUS

@@ -631,7 +631,7 @@
 #define	HWSET_MAX_SIZE				512
 #define   EFUSE_MAX_SECTION			64
 #define   EFUSE_REAL_CONTENT_LEN		256
-/* PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte.*/
+/* PG data exclude header, dummy 7 bytes from CP test and reserved 1byte.*/
 #define		EFUSE_OOB_PROTECT_BYTES		18
 
 #define	EEPROM_DEFAULT_TSSI			0x0

@@ -1523,7 +1523,7 @@
 #define	ROFDM0_TXCOEFF5			0xcb4
 #define	ROFDM0_TXCOEFF6			0xcb8
 
-/*Path_A RFE cotrol */
+/*Path_A RFE control */
 #define	RA_RFE_CTRL_8812		0xcb8
 /*Path_B RFE control*/
 #define	RB_RFE_CTRL_8812		0xeb8

@@ -2336,7 +2336,7 @@
 
 #define	REG_UN_used_register		0x01bf
 
-/* Path_A RFE cotrol pinmux*/
+/* Path_A RFE control pinmux*/
 #define		RA_RFE_PINMUX		0xcb0
 /* Path_B RFE control pinmux*/
 #define		RB_RFE_PINMUX		0xeb0

@@ -2345,17 +2345,17 @@
 #define		RB_RFE_INV		0xeb4
 
 /* RXIQC */
-/*RxIQ imblance matrix coeff. A & B*/
+/*RxIQ imbalance matrix coeff. A & B*/
 #define RA_RXIQC_AB			0xc10
-/*RxIQ imblance matrix coeff. C & D*/
+/*RxIQ imbalance matrix coeff. C & D*/
 #define	RA_RXIQC_CD			0xc14
 /* Pah_A TX scaling factor*/
 #define	RA_TXSCALE			0xc1c
 /* Path_B TX scaling factor*/
 #define	RB_TXSCALE			0xe1c
-/*RxIQ imblance matrix coeff. A & B*/
+/*RxIQ imbalance matrix coeff. A & B*/
 #define	RB_RXIQC_AB			0xe10
-/*RxIQ imblance matrix coeff. C & D*/
+/*RxIQ imbalance matrix coeff. C & D*/
 #define	RB_RXIQC_CD			0xe14
 /*bit mask for IQC matrix element A & C*/
 #define	RXIQC_AC			0x02ff

@@ -512,7 +512,7 @@ bool rtl8821ae_rx_query_desc(struct ieee80211_hw *hw,
 
 	/* hw will set status->decrypted true, if it finds the
 	 * frame is open data frame or mgmt frame.
-	 * So hw will not decryption robust managment frame
+	 * So hw will not decryption robust management frame
 	 * for IEEE80211w but still set status->decrypted
 	 * true, so here we should set it back to undecrypted
 	 * for IEEE80211w frame, and mac80211 sw will help

@@ -43,7 +43,7 @@ static void _usbctrl_vendorreq_sync(struct usb_device *udev, u8 reqtype,
 					 reqtype, value, REALTEK_USB_VENQT_CMD_IDX,
 					 pdata, len, 1000);
 		if (status < 0) {
-			/* firmware download is checksumed, don't retry */
+			/* firmware download is checksummed, don't retry */
 			if ((value >= FW_8192C_START_ADDRESS &&
 			    value <= FW_8192C_END_ADDRESS))
 				break;

@@ -744,7 +744,7 @@ enum rtl_var_map {
 	RTL_IMR_BDOK,		/*Beacon Queue DMA OK Interrup */
 	RTL_IMR_HIGHDOK,	/*High Queue DMA OK Interrupt */
 	RTL_IMR_COMDOK,		/*Command Queue DMA OK Interrupt*/
-	RTL_IMR_TBDOK,		/*Transmit Beacon OK interrup */
+	RTL_IMR_TBDOK,		/*Transmit Beacon OK interrupt */
 	RTL_IMR_MGNTDOK,	/*Management Queue DMA OK Interrupt */
 	RTL_IMR_TBDER,		/*For 92C,Transmit Beacon Error Interrupt */
 	RTL_IMR_BKDOK,		/*AC_BK DMA OK Interrupt */

@@ -2693,7 +2693,7 @@ struct rtl_priv {
 	int max_fw_size;
 
 	/* hal_cfg : for diff cards
-	 * intf_ops : for diff interrface usb/pcie
+	 * intf_ops : for diff interface usb/pcie
 	 */
 	const struct rtl_hal_cfg *cfg;
 	const struct rtl_intf_ops *intf_ops;

@@ -2841,7 +2841,7 @@ enum bt_radio_shared {
 #define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT(6)
 /* no matter RFOFF or SLEEP we set PS_ASPM_LEVL*/
 #define	RT_PS_LEVEL_ASPM		BIT(7)
-/*When LPS is on, disable 2R if no packet is received or transmittd.*/
+/*When LPS is on, disable 2R if no packet is received or transmitted.*/
 #define	RT_RF_LPS_DISALBE_2R		BIT(30)
 #define	RT_RF_LPS_LEVEL_ASPM		BIT(31)	/*LPS with ASPM */
 #define	RT_IN_PS_LEVEL(ppsc, _ps_flg)		\