[PATCH] ath11k: send proper txpower and maxregpower values to firmware
From: P Praneesh <hidden>
Date: 2021-10-25 12:17:36
Set proper values for max_regpower, max_power, max_antenna_gain as it is because firmware will convert power values to 0.5dbm steps by multiplying it with 2. If txpower is not set, it will lead to cca stuck resulting in latency issues for QCN9074. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Co-developed-by: Lavanya Suresh <redacted> Signed-off-by: Lavanya Suresh <redacted> Signed-off-by: P Praneesh <redacted> --- Depends-on: "ath11k: Add ROC support for wide band scan" --- drivers/net/wireless/ath/ath11k/mac.c | 12 ++++++------ drivers/net/wireless/ath/ath11k/wmi.c | 2 ++ 2 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 3d197d8..e0dae04 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c@@ -775,9 +775,9 @@ static int ath11k_mac_monitor_vdev_start(struct ath11k *ar, int vdev_id, arg.channel.chan_radar = !!(channel->flags & IEEE80211_CHAN_RADAR); arg.channel.min_power = 0; - arg.channel.max_power = channel->max_power * 2; - arg.channel.max_reg_power = channel->max_reg_power * 2; - arg.channel.max_antenna_gain = channel->max_antenna_gain * 2; + arg.channel.max_power = channel->max_power; + arg.channel.max_reg_power = channel->max_reg_power; + arg.channel.max_antenna_gain = channel->max_antenna_gain; arg.pref_tx_streams = ar->num_tx_chains; arg.pref_rx_streams = ar->num_rx_chains;
@@ -6127,9 +6127,9 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif, ath11k_phymodes[chandef->chan->band][chandef->width]; arg.channel.min_power = 0; - arg.channel.max_power = chandef->chan->max_power * 2; - arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; - arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2; + arg.channel.max_power = chandef->chan->max_power; + arg.channel.max_reg_power = chandef->chan->max_reg_power; + arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain; arg.pref_tx_streams = ar->num_tx_chains; arg.pref_rx_streams = ar->num_rx_chains;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index c428a025..242990e 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c@@ -2535,6 +2535,8 @@ int ath11k_wmi_send_scan_chan_list_cmd(struct ath11k *ar, tchan_info->reg_class_id); *reg2 |= FIELD_PREP(WMI_CHAN_REG_INFO2_ANT_MAX, tchan_info->antennamax); + *reg2 |= FIELD_PREP(WMI_CHAN_REG_INFO2_MAX_TX_PWR, + tchan_info->maxregpower); ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "WMI chan scan list chan[%d] = %u, chan_info->info %8x\n",
--
2.7.4