# Re: \[PATCH 3/3\] ath9k: Fix potential hw interrupt resume during reset

- From: Felix Fietkau \<nbd@nbd.name\>
- Date: 2021-09-15 09:49:24 
- List: linux-wireless
- Page: https://ratatoskr.run/linux-wireless/2021/09/1509213
- Thread: https://ratatoskr.run/linux-wireless/2021/09/1508468/t.md

```text

On 2021-09-14 21:25, Linus Lüssing wrote:
> From: Linus Lüssing <redacted>
> 
> There is a small risk of the ath9k hw interrupts being reenabled in the
> following way:
> 
> 1) ath_reset_internal()
>    ...
>    -> disable_irq()
>       ...
>       <- returns
> 
>                       2) ath9k_tasklet()
>                          ...
>                          -> ath9k_hw_resume_interrupts()
>                          ...
> 
> 1) ath_reset_internal() continued:
>    -> tasklet_disable(&sc->intr_tq); (= ath9k_tasklet() off)
> 
> By first disabling the ath9k interrupt there is a small window
> afterwards which allows ath9k hw interrupts being reenabled through
> the ath9k_tasklet() before we disable this tasklet in
> ath_reset_internal(). Leading to having the ath9k hw interrupts enabled
> during the reset, which we should avoid.
I don't see a way in which interrupts can be re-enabled through the
tasklet. disable_irq disables the entire PCI IRQ (not through ath9k hw
registers), and they will only be re-enabled by the corresponding
enable_irq call.

- Felix
```