[PATCH 1/2] mt76: connac: fix GTK rekey offload failure on WPA mixed mode

From: YN Chen <redacted>

Consider .max_reg_power in struct ieee80211_channel to limit the
maximum power the wireless device allowed to transmit on the
corresponding channel according to the regulatory domain.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: YN Chen <redacted>
---
 .../wireless/mediatek/mt76/mt76_connac_mcu.c  | 43 ++++++++++++++++++-
 1 file changed, 41 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index d71393b1c5e6..84f42ce12626 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c

@@ -1773,6 +1773,43 @@ static s8 mt76_connac_get_sar_power(struct mt76_phy *phy,
 	return target_power;
 }
 
+static s8 mt76_connac_get_ch_power(struct mt76_phy *phy,
+				   struct ieee80211_channel *chan,
+				   s8 target_power)
+{
+	struct mt76_dev *dev = phy->dev;

+				target_power = min_t(s8, power, target_power);
+			}
+			break;
+		}
+	}
+
+	return target_power;
+}
+
 static int
 mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 				  enum nl80211_band band)

@@ -1840,10 +1877,12 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
 				.hw_value = ch_list[idx],
 				.band = band,
 			};
-			s8 sar_power;
+			s8 reg_power, sar_power;
 
+			reg_power = mt76_connac_get_ch_power(phy, &chan,
+							     tx_power);
 			sar_power = mt76_connac_get_sar_power(phy, &chan,
-							      tx_power);
+							      reg_power);
 
 			mt76_get_rate_power_limits(phy, &chan, &limits,
 						   sar_power);

-- 
2.25.1

From: Leon Yen <redacted>

Update the proper firmware programming sequence to fix GTK rekey
offload failure on WPA mixed mode.

In the mt76_connac_mcu_key_iter,
gtk_tlv->proto should be only set up on pairwise key
and gtk_tlk->group_cipher should be only set up on the group key.

Otherwise, those parameters required by firmware would be set
incorrectly to cause GTK rekey offload failure on WPA mixed mode
and then disconnection follows.

Fixes: b47e21e75c80 ("mt76: mt7615: add gtk rekey offload support")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Leon Yen <redacted>
---
 .../net/wireless/mediatek/mt76/mt76_connac_mcu.c  | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index a2555dc0f003..d71393b1c5e6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c

@@ -1957,19 +1957,22 @@ mt76_connac_mcu_key_iter(struct ieee80211_hw *hw,
 	    key->cipher != WLAN_CIPHER_SUITE_TKIP)
 		return;
 
-	if (key->cipher == WLAN_CIPHER_SUITE_TKIP) {
-		gtk_tlv->proto = cpu_to_le32(NL80211_WPA_VERSION_1);
+	if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
 		cipher = BIT(3);
-	} else {
-		gtk_tlv->proto = cpu_to_le32(NL80211_WPA_VERSION_2);
+	else
 		cipher = BIT(4);
-	}
 
 	/* we are assuming here to have a single pairwise key */
 	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
+		if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
+			gtk_tlv->proto = cpu_to_le32(NL80211_WPA_VERSION_1);
+		else
+			gtk_tlv->proto = cpu_to_le32(NL80211_WPA_VERSION_2);