[PATCH] ath10k: Advertize beacon_int_min_gcd

This patch fixes regression caused by 0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.

Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053

Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <redacted>
---
 drivers/net/wireless/ath/ath10k/mac.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebb3f1b046f3..9486ef7cc06b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c

@@ -1,6 +1,7 @@
 /*
  * Copyright (c) 2005-2011 Atheros Communications Inc.
  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above

@@ -7874,6 +7875,7 @@ void ath10k_mac_destroy(struct ath10k *ar)
 		.max_interfaces = 8,
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
+		.beacon_int_min_gcd = 1,
 #ifdef CONFIG_ATH10K_DFS_CERTIFIED
 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20) |

@@ -7997,6 +7999,7 @@ void ath10k_mac_destroy(struct ath10k *ar)
 		.max_interfaces = 16,
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
+		.beacon_int_min_gcd = 1,
 #ifdef CONFIG_ATH10K_DFS_CERTIFIED
 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20) |

-- 
1.7.9.5

akolli@codeaurora.org wrote:

This patch fixes regression caused by 0c317a02ca98
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.

Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053

Fixes: 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <redacted>
Signed-off-by: Kalle Valo <redacted>

Patch applied to ath-next branch of ath.git, thanks.

8ebee73b574a ath10k: advertize beacon_int_min_gcd

-- 
https://patchwork.kernel.org/patch/10263995/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches