On Sun 25 Mar 22:40 PDT 2018, Govind Singh wrote:
quoted hunk
HOST allocates 2mb of region for modem and WCN3990
secure access and provides the address and access
control to target for secure access.
Add MSA handshake request/response messages.
Signed-off-by: Govind Singh <redacted>
---
drivers/net/wireless/ath/ath10k/qmi.c | 288 +++++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/qmi.h | 14 ++
2 files changed, 300 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index bc80b8f..763b812 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -26,6 +26,8 @@
#include <linux/string.h>
#include <net/sock.h>
#include <linux/soc/qcom/qmi.h>
+#include <linux/qcom_scm.h>
+#include <linux/of.h>
#include "qmi.h"
#include "qmi_svc_v01.h"
@@ -35,6 +37,240 @@
static struct ath10k_qmi *qmi;
static int
+ath10k_qmi_map_msa_permissions(struct ath10k_msa_mem_region_info *mem_region)
+{
+ struct qcom_scm_vmperm dst_perms[3];
+ unsigned int src_perms;
+ phys_addr_t addr;
+ u32 perm_count;
+ u32 size;
+ int ret;
+
+ addr = mem_region->reg_addr;
+ size = mem_region->size;
Skip the local variables.
+
+ src_perms = BIT(QCOM_SCM_VMID_HLOS);
+
+ dst_perms[0].vmid = QCOM_SCM_VMID_MSS_MSA;
+ dst_perms[0].perm = QCOM_SCM_PERM_RW;
+ dst_perms[1].vmid = QCOM_SCM_VMID_WLAN;
+ dst_perms[1].perm = QCOM_SCM_PERM_RW;
+
+ if (!mem_region->secure_flag) {
So with secure_flag equal to 0 we give less subsystems access to the
data? Is this logic inverted?
+ dst_perms[2].vmid = QCOM_SCM_VMID_WLAN_CE;
+ dst_perms[2].perm = QCOM_SCM_PERM_RW;
+ perm_count = 3;
+ } else {
+ dst_perms[2].vmid = 0;
+ dst_perms[2].perm = 0;
+ perm_count = 2;
If you set perm_count to 2 you don't need to clear vmid and perm of
dst_perms[2].
+ }
+
+ ret = qcom_scm_assign_mem(addr, size, &src_perms,
+ dst_perms, perm_count);
+ if (ret < 0)
+ pr_err("msa map permission failed=%d\n", ret);
Use dev_err()
+
+ return ret;
+}
+
+static int
+ath10k_qmi_unmap_msa_permissions(struct ath10k_msa_mem_region_info *mem_region)
+{
+ struct qcom_scm_vmperm dst_perms;
+ unsigned int src_perms;
+ phys_addr_t addr;
+ u32 size;
+ int ret;
+
+ addr = mem_region->reg_addr;
+ size = mem_region->size;
Skip the local variables.
+
+ src_perms = BIT(QCOM_SCM_VMID_MSS_MSA) | BIT(QCOM_SCM_VMID_WLAN);
+
+ if (!mem_region->secure_flag)
+ src_perms |= BIT(QCOM_SCM_VMID_WLAN_CE);
+
+ dst_perms.vmid = QCOM_SCM_VMID_HLOS;
+ dst_perms.perm = QCOM_SCM_PERM_RW;
+
+ ret = qcom_scm_assign_mem(addr, size, &src_perms, &dst_perms, 1);
+ if (ret < 0)
+ pr_err("msa unmap permission failed=%d\n", ret);
+
+ return ret;
+}
+
+static int ath10k_qmi_setup_msa_permissions(struct ath10k_qmi *qmi)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < qmi->nr_mem_region; i++) {
+ ret = ath10k_qmi_map_msa_permissions(&qmi->mem_region[i]);
+ if (ret)
+ goto err_unmap;
+ }
+
+ return 0;
+
+err_unmap:
+ for (i--; i >= 0; i--)
+ ath10k_qmi_unmap_msa_permissions(&qmi->mem_region[i]);
+ return ret;
+}
+
+static void ath10k_qmi_remove_msa_permissions(struct ath10k_qmi *qmi)
+{
+ int i;
+
+ for (i = 0; i < qmi->nr_mem_region; i++)
+ ath10k_qmi_unmap_msa_permissions(&qmi->mem_region[i]);
+}
+
+static int
+ ath10k_qmi_msa_mem_info_send_sync_msg(struct ath10k_qmi *qmi)
+{
+ struct wlfw_msa_info_resp_msg_v01 *resp;
This is 40 bytes,
+ struct wlfw_msa_info_req_msg_v01 *req;
This is 6 bytes.
So just put them on the stack and skip the memory management.
+ struct qmi_txn txn;
+ int ret;
+ int i;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ resp = kzalloc(sizeof(*resp), GFP_KERNEL);
+ if (!resp) {
+ kfree(req);
+ return -ENOMEM;
+ }
+
+ req->msa_addr = qmi->msa_pa;
+ req->size = qmi->msa_mem_size;
+
+ ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
+ wlfw_msa_info_resp_msg_v01_ei, resp);
+ if (ret < 0) {
+ pr_err("fail to init txn for MSA mem info resp %d\n",
+ ret);
Unless we have 2 billion outstanding transactions "ret" is going to be
ENOMEM here, in which case there is already a printout telling you about
the problem.
+ goto out;
+ }
+
+ ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
+ QMI_WLFW_MSA_INFO_REQ_V01,
+ WLFW_MSA_INFO_REQ_MSG_V01_MAX_MSG_LEN,
+ wlfw_msa_info_req_msg_v01_ei, req);
+ if (ret < 0) {
+ qmi_txn_cancel(&txn);
+ pr_err("fail to send MSA mem info req %d\n", ret);
Use dev_err().
+ goto out;
+ }
+
+ ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ);
The timeout is in jiffies, but I doubt you intended to the timeout to be
500 seconds either.
+ if (ret < 0)
+ goto out;
+
+ if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
+ pr_err("MSA mem info request rejected, result:%d error:%d\n",
+ resp->resp.result, resp->resp.error);
+ ret = -resp->resp.result;
Future readers will expect this to be a errno, in particular as most
other exit paths return errnos.
+ goto out;
+ }
+
+ pr_debug("receive mem_region_info_len: %d\n",
+ resp->mem_region_info_len);
+
+ if (resp->mem_region_info_len > QMI_WLFW_MAX_NUM_MEMORY_REGIONS_V01) {
+ pr_err("invalid memory region length received: %d\n",
+ resp->mem_region_info_len);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ qmi->nr_mem_region = resp->mem_region_info_len;
+ for (i = 0; i < resp->mem_region_info_len; i++) {
+ qmi->mem_region[i].reg_addr =
+ resp->mem_region_info[i].region_addr;
With the use of a local variable you should be able to avoid the line
breaks here.
+ qmi->mem_region[i].size =
+ resp->mem_region_info[i].size;
+ qmi->mem_region[i].secure_flag =
+ resp->mem_region_info[i].secure_flag;
+ pr_debug("mem region: %d Addr: 0x%llx Size: 0x%x Flag: 0x%08x\n",
+ i, qmi->mem_region[i].reg_addr,
+ qmi->mem_region[i].size,
+ qmi->mem_region[i].secure_flag);
+ }
+
+ pr_debug("MSA mem info request completed\n");
+ kfree(resp);
+ kfree(req);
+ return 0;
+
+out:
+ kfree(resp);
+ kfree(req);
+ return ret;
+}
+
+static int ath10k_qmi_msa_ready_send_sync_msg(struct ath10k_qmi *qmi)
+{
+ struct wlfw_msa_ready_resp_msg_v01 *resp;
This is 4 bytes,
+ struct wlfw_msa_ready_req_msg_v01 *req;
and this is 1 byte, use the stack.
+ struct qmi_txn txn;
+ int ret;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ resp = kzalloc(sizeof(*resp), GFP_KERNEL);
+ if (!resp) {
+ kfree(req);
+ return -ENOMEM;
+ }
+
+ ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
+ wlfw_msa_ready_resp_msg_v01_ei, resp);
+ if (ret < 0) {
+ pr_err("fail to init txn for MSA mem ready resp %d\n",
+ ret);
+ goto out;
+ }
+
+ ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
+ QMI_WLFW_MSA_READY_REQ_V01,
+ WLFW_MSA_READY_REQ_MSG_V01_MAX_MSG_LEN,
+ wlfw_msa_ready_req_msg_v01_ei, req);
+ if (ret < 0) {
+ qmi_txn_cancel(&txn);
+ pr_err("fail to send MSA mem ready req %d\n", ret);
+ goto out;
+ }
+
+ ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ);
As above.
+ if (ret < 0)
+ goto out;
+
+ if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
+ pr_err("qmi MSA mem ready request rejected, result:%d error:%d\n",
+ resp->resp.result, resp->resp.error);
Clean up the print statement, there's no reason to print
resp->resp.result, it is 1. And use dev_err().
+ ret = -resp->resp.result;
This will be interpreted by future readers as an errno.
+ }
+
+ pr_debug("MSA mem ready request completed\n");
dev_dbg().
quoted hunk
+ kfree(resp);
+ kfree(req);
+ return 0;
+
+out:
+ kfree(resp);
+ kfree(req);
+ return ret;
+}
+
+static int
ath10k_qmi_ind_register_send_sync_msg(struct ath10k_qmi *qmi)
{
struct wlfw_ind_register_resp_msg_v01 *resp;@@ -173,7 +409,27 @@ static void ath10k_qmi_event_server_arrive(struct work_struct *work)
if (ret)
return;
- ath10k_qmi_ind_register_send_sync_msg(qmi);
+ ret = ath10k_qmi_ind_register_send_sync_msg(qmi);
+ if (ret)
+ return;
+
+ ret = ath10k_qmi_msa_mem_info_send_sync_msg(qmi);
+ if (ret)
+ return;
+
+ ret = ath10k_qmi_setup_msa_permissions(qmi);
+ if (ret)
+ return;
+
+ ret = ath10k_qmi_msa_ready_send_sync_msg(qmi);
+ if (ret)
+ goto err_setup_msa;
+
+ return;
+
+err_setup_msa:
+ ath10k_qmi_remove_msa_permissions(qmi);
+ return;
}
static void ath10k_qmi_event_server_exit(struct work_struct *work)
@@ -252,6 +508,34 @@ static int ath10k_alloc_qmi_resources(struct ath10k_qmi *qmi)
return ret;
}
+static int ath10k_qmi_setup_msa_resources(struct device *dev,
+ struct ath10k_qmi *qmi)
+{
+ int ret;
+
+ ret = of_property_read_u32(dev->of_node, "qcom,wlan-msa-memory",
+ &qmi->msa_mem_size);
+
+ if (ret || qmi->msa_mem_size == 0) {
+ pr_err("fail to get MSA memory size: %u, ret: %d\n",
+ qmi->msa_mem_size, ret);
Use dev_err() and drop the msa_mem_size and ret from the printout, it
doesn't add any value.
+ return -ENOMEM;
+ }
+
+ qmi->msa_va = dmam_alloc_coherent(dev, qmi->msa_mem_size,
+ &qmi->msa_pa, GFP_KERNEL);
The third parameter is supposed to be a dma_addr_t, not a phys_addr_t.
But it looks like you can just change the type.
+ if (!qmi->msa_va) {
+ pr_err("dma alloc failed for MSA\n");
+ return -ENOMEM;
+ }
+
+ pr_debug("MSA pa: %pa, MSA va: 0x%p\n",
+ &qmi->msa_pa,
+ qmi->msa_va);
dev_dbg() and the appropriate types are %pad and %pK.
quoted hunk
+
+ return 0;
+}
+
static void ath10k_remove_qmi_resources(struct ath10k_qmi *qmi)
{
cancel_work_sync(&qmi->work_svc_arrive);@@ -272,7 +556,7 @@ static int ath10k_qmi_probe(struct platform_device *pdev)
qmi->pdev = pdev;
platform_set_drvdata(pdev, qmi);
-
This newline was a nice divider between the "chunks" of statements, like
paragraphs in a book...
quoted hunk
+ ath10k_qmi_setup_msa_resources(&pdev->dev, qmi);
ret = ath10k_alloc_qmi_resources(qmi);
if (ret < 0)
goto err;
diff --git a/drivers/net/wireless/ath/ath10k/qmi.h b/drivers/net/wireless/ath/ath10k/qmi.h
index 7697d24..47af020 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.h
+++ b/drivers/net/wireless/ath/ath10k/qmi.h
@@ -16,6 +16,8 @@
#ifndef _QMI_H_
#define _QMI_H_
+#define MAX_NUM_MEMORY_REGIONS 2
+
enum ath10k_qmi_driver_event_type {
ATH10K_QMI_EVENT_SERVER_ARRIVE,
ATH10K_QMI_EVENT_SERVER_EXIT,@@ -23,6 +25,12 @@ enum ath10k_qmi_driver_event_type {
ATH10K_QMI_EVENT_MAX,
};
+struct ath10k_msa_mem_region_info {
Afaict this struct is only used in qmi.c, so move it there.
+ u64 reg_addr;
This is your driver-local copy of the data being received in a
wlfw_msa_info_resp_msg_v01, use kernel native types instead.
I.e. make this phys_addr_t,
+ u32 size;
this is a size_t
+ u8 secure_flag;
And based on how you use this, just make it bool secure (and invert the
logic?)
quoted hunk
+};
+
struct ath10k_qmi {
struct platform_device *pdev;
struct qmi_handle qmi_hdl;@@ -33,5 +41,11 @@ struct ath10k_qmi {
struct work_struct work_svc_exit;
struct workqueue_struct *event_wq;
spinlock_t event_lock; /* spinlock for fw ready status*/
+ u32 nr_mem_region;
+ struct ath10k_msa_mem_region_info
+ mem_region[MAX_NUM_MEMORY_REGIONS];
+ phys_addr_t msa_pa;
+ u32 msa_mem_size;
+ void *msa_va;
};
Regards,
Bjorn
Hi Bjorn,
Thanks for the review.
On 2018-05-12 00:13, Bjorn Andersson wrote:
On Sun 25 Mar 22:40 PDT 2018, Govind Singh wrote:
quoted
HOST allocates 2mb of region for modem and WCN3990
secure access and provides the address and access
control to target for secure access.
Add MSA handshake request/response messages.
Signed-off-by: Govind Singh <redacted>
---
drivers/net/wireless/ath/ath10k/qmi.c | 288
+++++++++++++++++++++++++++++++++-
drivers/net/wireless/ath/ath10k/qmi.h | 14 ++
2 files changed, 300 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c
b/drivers/net/wireless/ath/ath10k/qmi.c
index bc80b8f..763b812 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -26,6 +26,8 @@
#include <linux/string.h>
#include <net/sock.h>
#include <linux/soc/qcom/qmi.h>
+#include <linux/qcom_scm.h>
+#include <linux/of.h>
#include "qmi.h"
#include "qmi_svc_v01.h"
@@ -35,6 +37,240 @@
static struct ath10k_qmi *qmi;
static int
+ath10k_qmi_map_msa_permissions(struct ath10k_msa_mem_region_info
*mem_region)
+{
+ struct qcom_scm_vmperm dst_perms[3];
+ unsigned int src_perms;
+ phys_addr_t addr;
+ u32 perm_count;
+ u32 size;
+ int ret;
+
+ addr = mem_region->reg_addr;
+ size = mem_region->size;
Skip the local variables.
Sure, will do in next version.
quoted
+
+ src_perms = BIT(QCOM_SCM_VMID_HLOS);
+
+ dst_perms[0].vmid = QCOM_SCM_VMID_MSS_MSA;
+ dst_perms[0].perm = QCOM_SCM_PERM_RW;
+ dst_perms[1].vmid = QCOM_SCM_VMID_WLAN;
+ dst_perms[1].perm = QCOM_SCM_PERM_RW;
+
+ if (!mem_region->secure_flag) {
So with secure_flag equal to 0 we give less subsystems access to the
data? Is this logic inverted?
Yes with secure flag mean less privileges i,e: Copy engine hardware
can not access the region.
quoted
+ dst_perms[2].vmid = QCOM_SCM_VMID_WLAN_CE;
+ dst_perms[2].perm = QCOM_SCM_PERM_RW;
+ perm_count = 3;
+ } else {
+ dst_perms[2].vmid = 0;
+ dst_perms[2].perm = 0;
+ perm_count = 2;
If you set perm_count to 2 you don't need to clear vmid and perm of
dst_perms[2].
ok, will remove.
quoted
+ }
+
+ ret = qcom_scm_assign_mem(addr, size, &src_perms,
+ dst_perms, perm_count);
+ if (ret < 0)
+ pr_err("msa map permission failed=%d\n", ret);
Use dev_err()
quoted
+
+ return ret;
+}
+
+static int
+ath10k_qmi_unmap_msa_permissions(struct ath10k_msa_mem_region_info
*mem_region)
+{
+ struct qcom_scm_vmperm dst_perms;
+ unsigned int src_perms;
+ phys_addr_t addr;
+ u32 size;
+ int ret;
+
+ addr = mem_region->reg_addr;
+ size = mem_region->size;
Skip the local variables.
Sure, will do in next version.
quoted
+
+ src_perms = BIT(QCOM_SCM_VMID_MSS_MSA) | BIT(QCOM_SCM_VMID_WLAN);
+
+ if (!mem_region->secure_flag)
+ src_perms |= BIT(QCOM_SCM_VMID_WLAN_CE);
+
+ dst_perms.vmid = QCOM_SCM_VMID_HLOS;
+ dst_perms.perm = QCOM_SCM_PERM_RW;
+
+ ret = qcom_scm_assign_mem(addr, size, &src_perms, &dst_perms, 1);
+ if (ret < 0)
+ pr_err("msa unmap permission failed=%d\n", ret);
+
+ return ret;
+}
+
quoted
+static int
+ ath10k_qmi_msa_mem_info_send_sync_msg(struct ath10k_qmi *qmi)
+{
+ struct wlfw_msa_info_resp_msg_v01 *resp;
This is 40 bytes,
Sure, will do in next version for all instances.
quoted
+ struct wlfw_msa_info_req_msg_v01 *req;
This is 6 bytes.
So just put them on the stack and skip the memory management.
Sure, will do in next version.
quoted
+ struct qmi_txn txn;
+ int ret;
+ int i;
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ resp = kzalloc(sizeof(*resp), GFP_KERNEL);
+ if (!resp) {
+ kfree(req);
+ return -ENOMEM;
+ }
+
+ req->msa_addr = qmi->msa_pa;
+ req->size = qmi->msa_mem_size;
+
+ ret = qmi_txn_init(&qmi->qmi_hdl, &txn,
+ wlfw_msa_info_resp_msg_v01_ei, resp);
+ if (ret < 0) {
+ pr_err("fail to init txn for MSA mem info resp %d\n",
+ ret);
Unless we have 2 billion outstanding transactions "ret" is going to be
ENOMEM here, in which case there is already a printout telling you
about
the problem.
Sure, will remove this redundant logging.
quoted
+ goto out;
+ }
+
+ ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
+ QMI_WLFW_MSA_INFO_REQ_V01,
+ WLFW_MSA_INFO_REQ_MSG_V01_MAX_MSG_LEN,
+ wlfw_msa_info_req_msg_v01_ei, req);
+ if (ret < 0) {
+ qmi_txn_cancel(&txn);
+ pr_err("fail to send MSA mem info req %d\n", ret);
Use dev_err().
quoted
+ goto out;
+ }
+
+ ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ);
The timeout is in jiffies, but I doubt you intended to the timeout to
be
500 seconds either.
yes, its pretty high. I will reduce this.
quoted
+ if (ret < 0)
+ goto out;
+
+ if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
+ pr_err("MSA mem info request rejected, result:%d error:%d\n",
+ resp->resp.result, resp->resp.error);
+ ret = -resp->resp.result;
Future readers will expect this to be a errno, in particular as most
other exit paths return errnos.
quoted
+ goto out;
+ }
+
+ pr_debug("receive mem_region_info_len: %d\n",
+ resp->mem_region_info_len);
+
+ if (resp->mem_region_info_len > QMI_WLFW_MAX_NUM_MEMORY_REGIONS_V01)
{
+ pr_err("invalid memory region length received: %d\n",
+ resp->mem_region_info_len);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ qmi->nr_mem_region = resp->mem_region_info_len;
+ for (i = 0; i < resp->mem_region_info_len; i++) {
+ qmi->mem_region[i].reg_addr =
+ resp->mem_region_info[i].region_addr;
With the use of a local variable you should be able to avoid the line
breaks here.
Sure, will do in next version.
quoted
+
+ ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn,
+ QMI_WLFW_MSA_READY_REQ_V01,
+ WLFW_MSA_READY_REQ_MSG_V01_MAX_MSG_LEN,
+ wlfw_msa_ready_req_msg_v01_ei, req);
+ if (ret < 0) {
+ qmi_txn_cancel(&txn);
+ pr_err("fail to send MSA mem ready req %d\n", ret);
+ goto out;
+ }
+
+ ret = qmi_txn_wait(&txn, WLFW_TIMEOUT * HZ);
As above.
quoted
+ if (ret < 0)
+ goto out;
+
+ if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
+ pr_err("qmi MSA mem ready request rejected, result:%d error:%d\n",
+ resp->resp.result, resp->resp.error);
Clean up the print statement, there's no reason to print
resp->resp.result, it is 1. And use dev_err().
quoted
+ ret = -resp->resp.result;
This will be interpreted by future readers as an errno.
quoted
+ }
+
+ pr_debug("MSA mem ready request completed\n");
dev_dbg().
quoted
+ kfree(resp);
+ kfree(req);
+ return 0;
+
+out:
+ kfree(resp);
+ kfree(req);
+ return ret;
+}
+
+static int
ath10k_qmi_ind_register_send_sync_msg(struct ath10k_qmi *qmi)
{
struct wlfw_ind_register_resp_msg_v01 *resp;@@ -173,7 +409,27 @@ static void ath10k_qmi_event_server_arrive(struct
work_struct *work)
if (ret)
return;
- ath10k_qmi_ind_register_send_sync_msg(qmi);
+ ret = ath10k_qmi_ind_register_send_sync_msg(qmi);
+ if (ret)
+ return;
+
+ ret = ath10k_qmi_msa_mem_info_send_sync_msg(qmi);
+ if (ret)
+ return;
+
+ ret = ath10k_qmi_setup_msa_permissions(qmi);
+ if (ret)
+ return;
+
+ ret = ath10k_qmi_msa_ready_send_sync_msg(qmi);
+ if (ret)
+ goto err_setup_msa;
+
+ return;
+
+err_setup_msa:
+ ath10k_qmi_remove_msa_permissions(qmi);
+ return;
}
static void ath10k_qmi_event_server_exit(struct work_struct *work)
@@ -252,6 +508,34 @@ static int ath10k_alloc_qmi_resources(struct
ath10k_qmi *qmi)
return ret;
}
+static int ath10k_qmi_setup_msa_resources(struct device *dev,
+ struct ath10k_qmi *qmi)
+{
+ int ret;
+
+ ret = of_property_read_u32(dev->of_node, "qcom,wlan-msa-memory",
+ &qmi->msa_mem_size);
+
+ if (ret || qmi->msa_mem_size == 0) {
+ pr_err("fail to get MSA memory size: %u, ret: %d\n",
+ qmi->msa_mem_size, ret);
Use dev_err() and drop the msa_mem_size and ret from the printout, it
doesn't add any value.
quoted
+ return -ENOMEM;
+ }
+
+ qmi->msa_va = dmam_alloc_coherent(dev, qmi->msa_mem_size,
+ &qmi->msa_pa, GFP_KERNEL);
The third parameter is supposed to be a dma_addr_t, not a phys_addr_t.
But it looks like you can just change the type.
quoted
+ if (!qmi->msa_va) {
+ pr_err("dma alloc failed for MSA\n");
+ return -ENOMEM;
+ }
+
+ pr_debug("MSA pa: %pa, MSA va: 0x%p\n",
+ &qmi->msa_pa,
+ qmi->msa_va);
dev_dbg() and the appropriate types are %pad and %pK.
quoted
+
+ return 0;
+}
+
static void ath10k_remove_qmi_resources(struct ath10k_qmi *qmi)
{
cancel_work_sync(&qmi->work_svc_arrive);@@ -272,7 +556,7 @@ static int ath10k_qmi_probe(struct platform_device
*pdev)
qmi->pdev = pdev;
platform_set_drvdata(pdev, qmi);
-
This newline was a nice divider between the "chunks" of statements,
like
paragraphs in a book...
quoted
+ ath10k_qmi_setup_msa_resources(&pdev->dev, qmi);
ret = ath10k_alloc_qmi_resources(qmi);
if (ret < 0)
goto err;
diff --git a/drivers/net/wireless/ath/ath10k/qmi.h
b/drivers/net/wireless/ath/ath10k/qmi.h
index 7697d24..47af020 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.h
+++ b/drivers/net/wireless/ath/ath10k/qmi.h
@@ -16,6 +16,8 @@
#ifndef _QMI_H_
#define _QMI_H_
+#define MAX_NUM_MEMORY_REGIONS 2
+
enum ath10k_qmi_driver_event_type {
ATH10K_QMI_EVENT_SERVER_ARRIVE,
ATH10K_QMI_EVENT_SERVER_EXIT,@@ -23,6 +25,12 @@ enum ath10k_qmi_driver_event_type {
ATH10K_QMI_EVENT_MAX,
};
+struct ath10k_msa_mem_region_info {
Afaict this struct is only used in qmi.c, so move it there.
quoted
+ u64 reg_addr;
This is your driver-local copy of the data being received in a
wlfw_msa_info_resp_msg_v01, use kernel native types instead.
I.e. make this phys_addr_t,
Sure, will do in next version.
quoted
+ u32 size;
this is a size_t
quoted
+ u8 secure_flag;
And based on how you use this, just make it bool secure (and invert the
logic?)
Sure, will do in next version.
quoted
+};
+
struct ath10k_qmi {
struct platform_device *pdev;
struct qmi_handle qmi_hdl;@@ -33,5 +41,11 @@ struct ath10k_qmi {
struct work_struct work_svc_exit;
struct workqueue_struct *event_wq;
spinlock_t event_lock; /* spinlock for fw ready status*/
+ u32 nr_mem_region;
+ struct ath10k_msa_mem_region_info
+ mem_region[MAX_NUM_MEMORY_REGIONS];
+ phys_addr_t msa_pa;
+ u32 msa_mem_size;
+ void *msa_va;
};
Regards,
Bjorn
BR,
Govind