diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 0150747..12e9333 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -527,6 +527,10 @@ struct mac80211_hwsim_data {
u8 scan_addr[ETH_ALEN];
struct ieee80211_channel *channel;
+ enum nl80211_chan_width ch_width;
+ u32 center_freq1;
+ u32 center_freq2;
+
u64 beacon_int /* beacon interval in us */;
unsigned int rx_filter;
bool started, idle, scanning;@@ -998,6 +1002,64 @@ static int hwsim_unicast_netgroup(struct mac80211_hwsim_data *data,
return res;
}
+static void mac80211_hwsim_check_nl_notify(struct mac80211_hwsim_data *data)
+{
+ struct sk_buff *skb;
+ u32 center_freq = 0;
+ u32 _portid;
+ void *msg_head;
+
+ /* wmediumd mode check */
+ _portid = READ_ONCE(data->wmediumd);
+
+ if (!_portid)
+ return;
+
+ skb = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+ if (!skb)
+ goto err_print;
+
+ msg_head = genlmsg_put(skb, 0, 0, &hwsim_genl_family, 0,
+ HWSIM_CMD_NOTIFY_CH_CHANGE);
+ if (!msg_head) {
+ pr_debug("mac80211_hwsim: problem with msg_head, notify-ch-change\n");
+ goto nla_put_failure;
+ }
+
+ if (nla_put_u32(skb, HWSIM_ATTR_RADIO_ID, data->idx))
+ goto nla_put_failure;
+
+ if (nla_put(skb, HWSIM_ATTR_ADDR_TRANSMITTER,
+ ETH_ALEN, data->addresses[1].addr))
+ goto nla_put_failure;
+
+ if (data->channel)
+ center_freq = data->channel->center_freq;
+
+ if (nla_put_u32(skb, HWSIM_ATTR_FREQ, center_freq))
+ goto nla_put_failure;
+
+ if (nla_put_u32(skb, HWSIM_ATTR_CH_FREQ1, data->center_freq1))
+ goto nla_put_failure;
+
+ if (nla_put_u32(skb, HWSIM_ATTR_CH_FREQ2, data->center_freq2))
+ goto nla_put_failure;
+
+ if (nla_put_u32(skb, HWSIM_ATTR_CH_WIDTH, data->ch_width))
+ goto nla_put_failure;
+
+ genlmsg_end(skb, msg_head);
+ if (genlmsg_unicast(&init_net, skb, _portid))
+ goto err_print;
+
+ return;
+
+nla_put_failure:
+ nlmsg_free(skb);
+err_print:
+ pr_debug("mac80211_hwsim: error occurred in %s\n", __func__);
+}
+
static void mac80211_hwsim_tx_frame_nl(struct ieee80211_hw *hw,
struct sk_buff *my_skb,
int dst_portid)@@ -1599,6 +1661,9 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
data->channel = conf->chandef.chan;
+ data->ch_width = conf->chandef.width;
+ data->center_freq1 = conf->chandef.center_freq1;
+ data->center_freq2 = conf->chandef.center_freq2;
WARN_ON(data->channel && data->use_chanctx);
@@ -1615,6 +1680,8 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
HRTIMER_MODE_REL);
}
+ mac80211_hwsim_check_nl_notify(data);
+
return 0;
}
diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h
index 39f2246..1251fdd 100644
--- a/drivers/net/wireless/mac80211_hwsim.h
+++ b/drivers/net/wireless/mac80211_hwsim.h
@@ -71,6 +71,15 @@ enum hwsim_tx_control_flags {
* @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
* @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses:
* %HWSIM_ATTR_RADIO_ID
+ * @HWSIM_CMD_NOTIFY_CH_CHANGE: notify user-space about channel-change. This is
+ * designed to help the user-space app better emulate radio hardware.
+ * This command uses:
+ * %HWSIM_ATTR_FREQ # Notify current operating center frequency.
+ * %HWSIM_ATTR_CH_FREQ1 # Configured center-freq-1.
+ * %HWSIM_ATTR_CH_FREQ2 # Configured center-freq-2.
+ * %HWSIM_ATTR_CH_WIDTH # Configured channel width.
+ * %HWSIM_ATTR_ADDR_TRANSMITTER # ID which radio we are notifying about.
+ * %HWSIM_ATTR_ADDR_ID # Numeric Radio ID.
* @__HWSIM_CMD_MAX: enum limit
*/
enum {@@ -81,6 +90,7 @@ enum {
HWSIM_CMD_NEW_RADIO,
HWSIM_CMD_DEL_RADIO,
HWSIM_CMD_GET_RADIO,
+ HWSIM_CMD_NOTIFY_CH_CHANGE,
__HWSIM_CMD_MAX,
};
#define HWSIM_CMD_MAX (_HWSIM_CMD_MAX - 1)@@ -123,6 +133,9 @@ enum {
* @HWSIM_ATTR_RADIO_NAME: Name of radio, e.g. phy666
* @HWSIM_ATTR_NO_VIF: Do not create vif (wlanX) when creating radio.
* @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received.
+ * @HWSIM_ATTR_CH_FREQ1: Configured center-freq-1.
+ * @HWSIM_ATTR_CH_FREQ2: Configured center-freq-2.
+ * @HWSIM_ATTR_CH_WIDTH: Configured channel width.
* @__HWSIM_ATTR_MAX: enum limit
*/
@@ -149,6 +162,9 @@ enum {
HWSIM_ATTR_NO_VIF,
HWSIM_ATTR_FREQ,
HWSIM_ATTR_PAD,
+ HWSIM_ATTR_CH_FREQ1,
+ HWSIM_ATTR_CH_FREQ2,
+ HWSIM_ATTR_CH_WIDTH,
__HWSIM_ATTR_MAX,
};
#define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1)--
2.4.11