[PATCH 00/10] brcm80211: smac: rework regulatory support

STALE5171d

Revision v1 of 3 in this series.

16 messages, 3 authors, 2012-06-04 · open the first message on its own page

[PATCH 00/10] brcm80211: smac: rework regulatory support

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:42

brcmsmac has its own internal regulatory implementation which attempts
to enforce a Broadcom defined domain named X2. This code has no
integration with mac80211 regulatory other than supplying regulatory
hints, and thus each implementation operates independently of the other,
enforcing conflicting sets of rules.

This series of patches converts brcmsmac to relying on the mac80211
regulatory implementation. The X2 domain is registered with mac80211,
and brcmsmac is converted to using the constraints from mac80211 for
hardware configuration. Much code is removed in the process :)

There is one holdover from the old regulatory implementation. The MIMO
tx power limits for brcmsmac are still being configured based on
internal data for the X2 domain. Arend is trying to find out how these
need to be handled, but this can be changed at a later time.

Also worth noting is that support for the 5GHz DFS channels is removed
since the driver doesn't currently support DFS or radar detection.

Arend: This should have all the changes discussed on the RFC patch
review, but let me know if I missed anything. There are two new patches,
one to break out the removal of the 40MHz channel code into a separate
patch and another to remove the DFS channels until something can be done
about DFS or radar detection. I went ahead and added the Reviewed-by
tags you supplied to the remainder, but pretty much all the patches
after the first two have changed to varying degrees, so please have
another look.

Thanks,
Seth


Seth Forshee (10):
  brcm80211: smac: don't set up tx power limits during initialization
  brcm80211: smac: always set channel specified by mac80211
  brcm80211: smac: remove unused code for 40MHz channels
  brcm80211: smac: clean up channel.c
  brcm80211: smac: remove DFS channels from 5GHz band
  brcm80211: smac: inform mac80211 of the X2 regulatory domain
  brcm80211: smac: enable/disable radio on regulatory updates
  brcm80211: smac: use mac80211 channel data for tx power limits
  brcm80211: smac: don't validate channels against internal regulatory
    data
  brcm80211: smac: use current regulatory domain when checking whether
    OFDM is allowed

 drivers/net/wireless/brcm80211/brcmsmac/channel.c  | 1188 ++++----------------
 drivers/net/wireless/brcm80211/brcmsmac/channel.h  |    4 +-
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |   50 +-
 drivers/net/wireless/brcm80211/brcmsmac/main.c     |   36 +-
 4 files changed, 227 insertions(+), 1051 deletions(-)

[PATCH 01/10] brcm80211: smac: don't set up tx power limits during initialization

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:42

This code is unnecessary, and in fact it's never executed because the
interface is never up when brcms_c_channels_commit() is called. Removing
it helps simplify the implementation of proper regulatory support.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Reviewed-by: Brett Rudley <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |    8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index eb77ac3..049d78f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -908,7 +908,6 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	uint chan;
-	struct txpwr_limits txpwr;
 
 	/* search for the existence of any valid channel */
 	for (chan = 0; chan < MAXCHANNEL; chan++) {

@@ -949,13 +948,6 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
 						     brcms_c_japan(wlc) ? true :
 						     false);
-
-	if (wlc->pub->up && chan != INVCHANNEL) {
-		brcms_c_channel_reg_limits(wlc_cm, wlc->chanspec, &txpwr);
-		brcms_c_channel_min_txpower_limits_with_local_constraint(wlc_cm,
-			&txpwr, BRCMS_TXPWR_MAX);
-		wlc_phy_txpower_limit_set(wlc->band->pi, &txpwr, wlc->chanspec);
-	}
 }
 
 static int

-- 
1.7.9.5

[PATCH 02/10] brcm80211: smac: always set channel specified by mac80211

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:44

In some situations brcmsmac is choosing a channel internally. This makes
it difficult at times to know what channel to use for enforcing
regulatory constraints, so instead always use the channel from the
mac80211 configuration.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/main.c |   30 +++++-------------------
 1 file changed, 6 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 19db405..93c865d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c

@@ -3139,20 +3139,6 @@ void brcms_c_reset(struct brcms_c_info *wlc)
 	brcms_b_reset(wlc->hw);
 }
 
-/* Return the channel the driver should initialize during brcms_c_init.
- * the channel may have to be changed from the currently configured channel
- * if other configurations are in conflict (bandlocked, 11n mode disabled,
- * invalid channel for current country, etc.)
- */
-static u16 brcms_c_init_chanspec(struct brcms_c_info *wlc)
-{
-	u16 chanspec =
-	    1 | WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE |
-	    WL_CHANSPEC_BAND_2G;
-
-	return chanspec;
-}
-
 void brcms_c_init_scb(struct scb *scb)
 {
 	int i;

@@ -5129,6 +5115,8 @@ static void brcms_c_wme_retries_write(struct brcms_c_info *wlc)
 /* make interface operational */
 int brcms_c_up(struct brcms_c_info *wlc)
 {
+	struct ieee80211_channel *ch;
+
 	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
 
 	/* HW is turned off so don't try to access it */

@@ -5195,8 +5183,9 @@ int brcms_c_up(struct brcms_c_info *wlc)
 	wlc->pub->up = true;
 
 	if (wlc->bandinit_pending) {
+		ch = wlc->pub->ieee_hw->conf.channel;
 		brcms_c_suspend_mac_and_wait(wlc);
-		brcms_c_set_chanspec(wlc, wlc->default_bss->chanspec);
+		brcms_c_set_chanspec(wlc, ch20mhz_chspec(ch->hw_value));
 		wlc->bandinit_pending = false;
 		brcms_c_enable_mac(wlc);
 	}

@@ -8201,19 +8190,12 @@ bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded)
 void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx)
 {
 	struct bcma_device *core = wlc->hw->d11core;
+	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
 	u16 chanspec;
 
 	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
 
-	/*
-	 * This will happen if a big-hammer was executed. In
-	 * that case, we want to go back to the channel that
-	 * we were on and not new channel
-	 */
-	if (wlc->pub->associated)
-		chanspec = wlc->home_chanspec;
-	else
-		chanspec = brcms_c_init_chanspec(wlc);
+	chanspec = ch20mhz_chspec(ch->hw_value);
 
 	brcms_b_init(wlc->hw, chanspec);

-- 
1.7.9.5

[PATCH 03/10] brcm80211: smac: remove unused code for 40MHz channels

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:46

This code has been kept around in anticipation of adding support for
40MHz channels, but subsequent patches to better integrate with mac80211
regulatory support will render it completely broken. Therefore we should
go ahead and remove it.

Keep these changes separate from other cleanup patches in order to make
it easier to resurrect 40MHz channel support at some point in the
future.

Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |  116 ---------------------
 1 file changed, 116 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 049d78f..089cc87 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -512,83 +512,6 @@ static const struct {
 	"X2", LOCALES(i, 11, bn, 11n)},	/* Worldwide RoW 2 */
 };
 
-#ifdef SUPPORT_40MHZ
-/* 20MHz channel info for 40MHz pairing support */
-struct chan20_info {
-	u8 sb;
-	u8 adj_sbs;
-};
-
-/* indicates adjacent channels that are allowed for a 40 Mhz channel and
- * those that permitted by the HT
- */
-struct chan20_info chan20_info[] = {
-	/* 11b/11g */
-/* 0 */ {1, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 1 */ {2, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 2 */ {3, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 3 */ {4, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 4 */ {5, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 5 */ {6, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 6 */ {7, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 7 */ {8, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 8 */ {9, (CH_UPPER_SB | CH_LOWER_SB | CH_EWA_VALID)},
-/* 9 */ {10, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 10 */ {11, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 11 */ {12, (CH_LOWER_SB)},
-/* 12 */ {13, (CH_LOWER_SB)},
-/* 13 */ {14, (CH_LOWER_SB)},
-
-/* 11a japan high */
-/* 14 */ {34, (CH_UPPER_SB)},
-/* 15 */ {38, (CH_LOWER_SB)},
-/* 16 */ {42, (CH_LOWER_SB)},
-/* 17 */ {46, (CH_LOWER_SB)},
-
-/* 11a usa low */
-/* 18 */ {36, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 19 */ {40, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 20 */ {44, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 21 */ {48, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 22 */ {52, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 23 */ {56, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 24 */ {60, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 25 */ {64, (CH_LOWER_SB | CH_EWA_VALID)},
-
-/* 11a Europe */
-/* 26 */ {100, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 27 */ {104, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 28 */ {108, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 29 */ {112, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 30 */ {116, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 31 */ {120, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 32 */ {124, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 33 */ {128, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 34 */ {132, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 35 */ {136, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 36 */ {140, (CH_LOWER_SB)},
-
-/* 11a usa high, ref5 only */
-/* The 0x80 bit in pdiv means these are REF5, other entries are REF20 */
-/* 37 */ {149, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 38 */ {153, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 39 */ {157, (CH_UPPER_SB | CH_EWA_VALID)},
-/* 40 */ {161, (CH_LOWER_SB | CH_EWA_VALID)},
-/* 41 */ {165, (CH_LOWER_SB)},
-
-/* 11a japan */
-/* 42 */ {184, (CH_UPPER_SB)},
-/* 43 */ {188, (CH_LOWER_SB)},
-/* 44 */ {192, (CH_UPPER_SB)},
-/* 45 */ {196, (CH_LOWER_SB)},
-/* 46 */ {200, (CH_UPPER_SB)},
-/* 47 */ {204, (CH_LOWER_SB)},
-/* 48 */ {208, (CH_UPPER_SB)},
-/* 49 */ {212, (CH_LOWER_SB)},
-/* 50 */ {216, (CH_LOWER_SB)}
-};
-#endif				/* SUPPORT_40MHZ */
-
 static const struct locale_info *brcms_c_get_locale_2g(u8 locale_idx)
 {
 	if (locale_idx >= ARRAY_SIZE(g_locale_2g_table))

@@ -1449,45 +1372,6 @@ brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec,
 			return brcms_c_valid_channel20(wlc_cm->wlc->cmi,
 						       channel);
 	}
-#ifdef SUPPORT_40MHZ
-	/*
-	 * We know we are now checking a 40MHZ channel, so we should
-	 * only be here for NPHYS
-	 */
-	if (BRCMS_ISNPHY(wlc->band) || BRCMS_ISSSLPNPHY(wlc->band)) {
-		u8 upper_sideband = 0, idx;
-		u8 num_ch20_entries =
-		    sizeof(chan20_info) / sizeof(struct chan20_info);
-
-		if (!VALID_40CHANSPEC_IN_BAND(wlc, chspec_bandunit(chspec)))
-			return false;
-
-		if (dualband) {
-			if (!brcms_c_valid_channel20_db(wlc->cmi,
-							lower_20_sb(channel)) ||
-			    !brcms_c_valid_channel20_db(wlc->cmi,
-							upper_20_sb(channel)))
-				return false;
-		} else {
-			if (!brcms_c_valid_channel20(wlc->cmi,
-						     lower_20_sb(channel)) ||
-			    !brcms_c_valid_channel20(wlc->cmi,
-						     upper_20_sb(channel)))
-				return false;
-		}
-
-		/* find the lower sideband info in the sideband array */
-		for (idx = 0; idx < num_ch20_entries; idx++) {
-			if (chan20_info[idx].sb == lower_20_sb(channel))
-				upper_sideband = chan20_info[idx].adj_sbs;
-		}
-		/* check that the lower sideband allows an upper sideband */
-		if ((upper_sideband & (CH_UPPER_SB | CH_EWA_VALID)) ==
-		    (CH_UPPER_SB | CH_EWA_VALID))
-			return true;
-		return false;
-	}
-#endif				/* 40 MHZ */
 
 	return false;
 }

-- 
1.7.9.5

[PATCH 04/10] brcm80211: smac: clean up channel.c

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:48

Much of the code is either unsed or never put to any useful purpose.
Remove this code in advance of reworking the driver's regulatory
support.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Reviewed-by: Brett Rudley <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |  138 +--------------------
 1 file changed, 5 insertions(+), 133 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 089cc87..c311ef7 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -58,18 +58,8 @@
 				 LOCALE_CHAN_12_13 | \
 				 LOCALE_CHAN_14)
 
-#define  LOCALE_RADAR_SET_NONE		  0
-#define  LOCALE_RADAR_SET_1		  1
-
 #define  LOCALE_RESTRICTED_NONE		  0
 #define  LOCALE_RESTRICTED_SET_2G_SHORT   1
-#define  LOCALE_RESTRICTED_CHAN_165       2
-#define  LOCALE_CHAN_ALL_5G		  3
-#define  LOCALE_RESTRICTED_JAPAN_LEGACY   4
-#define  LOCALE_RESTRICTED_11D_2G	  5
-#define  LOCALE_RESTRICTED_11D_5G	  6
-#define  LOCALE_RESTRICTED_LOW_HI	  7
-#define  LOCALE_RESTRICTED_12_13_14	  8
 
 #define LOCALE_2G_IDX_i			0
 #define LOCALE_5G_IDX_11		0

@@ -118,8 +108,6 @@
 				 (((c) < 100) ? 2 : \
 				 (((c) < 149) ? 3 : 4))))
 
-#define ISDFS_EU(fl)		(((fl) & BRCMS_DFS_EU) == BRCMS_DFS_EU)
-
 struct brcms_cm_band {
 	/* struct locale_info flags */
 	u8 locale_flags;

@@ -127,9 +115,6 @@ struct brcms_cm_band {
 	struct brcms_chanvec valid_channels;
 	/* List of restricted use channels */
 	const struct brcms_chanvec *restricted_channels;
-	/* List of radar sensitive channels */
-	const struct brcms_chanvec *radar_channels;
-	u8 PAD[8];
 };
 
  /* locale per-channel tx power limits for MIMO frames

@@ -158,7 +143,6 @@ struct brcms_cm_info {
 	char srom_ccode[BRCM_CNTRY_BUF_SZ];	/* Country Code in SROM */
 	uint srom_regrev;	/* Regulatory Rev for the SROM ccode */
 	const struct country_info *country;	/* current country def */
-	char ccode[BRCM_CNTRY_BUF_SZ];	/* current internal Country Code */
 	uint regrev;		/* current Regulatory Revision */
 	char country_abbrev[BRCM_CNTRY_BUF_SZ];	/* current advertised ccode */
 	/* per-band state (one per phy/radio) */

@@ -171,14 +155,10 @@ struct brcms_cm_info {
 /* locale channel and power info. */
 struct locale_info {
 	u32 valid_channels;
-	/* List of radar sensitive channels */
-	u8 radar_channels;
 	/* List of channels used only if APs are detected */
 	u8 restricted_channels;
 	/* Max tx pwr in qdBm for each sub-band */
 	s8 maxpwr[BRCMS_MAXPWR_TBL_SIZE];
-	/* Country IE advertised max tx pwr in dBm per sub-band */
-	s8 pub_maxpwr[BAND_5G_PWR_LVLS];
 	u8 flags;
 };

@@ -196,46 +176,10 @@ static const struct brcms_chanvec chanvec_none = {
 	 0x00, 0x00, 0x00, 0x00}
 };
 
-/* All 2.4 GHz HW channels */
-static const struct brcms_chanvec chanvec_all_2G = {
-	{0xfe, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* All 5 GHz HW channels */
-static const struct brcms_chanvec chanvec_all_5G = {
-	{0x00, 0x00, 0x00, 0x00, 0x54, 0x55, 0x11, 0x11,
-	 0x01, 0x00, 0x00, 0x00, 0x10, 0x11, 0x11, 0x11,
-	 0x11, 0x11, 0x20, 0x22, 0x22, 0x00, 0x00, 0x11,
-	 0x11, 0x11, 0x11, 0x01}
-};
-
-/*
- * Radar channel sets
- */
-
-/* Channels 52 - 64, 100 - 140 */
-static const struct brcms_chanvec radar_set1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x11,  /* 52 - 60 */
-	 0x01, 0x00, 0x00, 0x00, 0x10, 0x11, 0x11, 0x11,  /* 64, 100 - 124 */
-	 0x11, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  /* 128 - 140 */
-	 0x00, 0x00, 0x00, 0x00}
-};
-
 /*
  * Restricted channel sets
  */
 
-/* Channels 34, 38, 42, 46 */
-static const struct brcms_chanvec restricted_set_japan_legacy = {
-	{0x00, 0x00, 0x00, 0x00, 0x44, 0x44, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
 /* Channels 12, 13 */
 static const struct brcms_chanvec restricted_set_2g_short = {
 	{0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

@@ -244,47 +188,11 @@ static const struct brcms_chanvec restricted_set_2g_short = {
 	 0x00, 0x00, 0x00, 0x00}
 };
 
-/* Channel 165 */
-static const struct brcms_chanvec restricted_chan_165 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* Channels 36 - 48 & 149 - 165 */
-static const struct brcms_chanvec restricted_low_hi = {
-	{0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x01, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x20, 0x22, 0x22, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* Channels 12 - 14 */
-static const struct brcms_chanvec restricted_set_12_13_14 = {
-	{0x00, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
 /* global memory to provide working buffer for expanded locale */
 
-static const struct brcms_chanvec *g_table_radar_set[] = {
-	&chanvec_none,
-	&radar_set1
-};
-
 static const struct brcms_chanvec *g_table_restricted_chan[] = {
 	&chanvec_none,		/* restricted_set_none */
 	&restricted_set_2g_short,
-	&restricted_chan_165,
-	&chanvec_all_5G,
-	&restricted_set_japan_legacy,
-	&chanvec_all_2G,	/* restricted_set_11d_2G */
-	&chanvec_all_5G,	/* restricted_set_11d_5G */
-	&restricted_low_hi,
-	&restricted_set_12_13_14
 };
 
 static const struct brcms_chanvec locale_2g_01_11 = {

@@ -445,11 +353,9 @@ static void brcms_c_locale_get_channels(const struct locale_info *locale,
  */
 static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
 	LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13,
-	LOCALE_RADAR_SET_NONE,
 	LOCALE_RESTRICTED_SET_2G_SHORT,
 	{QDB(19), QDB(19), QDB(19),
 	 QDB(19), QDB(19), QDB(19)},
-	{20, 20, 20, 0},
 	BRCMS_EIRP
 };

@@ -459,10 +365,8 @@ static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
 static const struct locale_info locale_11 = {
 	/* locale 11. channel 36 - 48, 52 - 64, 100 - 140, 149 - 165 */
 	LOCALE_CHAN_36_64 | LOCALE_CHAN_100_140 | LOCALE_CHAN_149_165,
-	LOCALE_RADAR_SET_1,
 	LOCALE_RESTRICTED_NONE,
 	{QDB(21), QDB(21), QDB(21), QDB(21), QDB(21)},
-	{23, 23, 23, 30, 30},
 	BRCMS_EIRP | BRCMS_DFS_EU
 };

@@ -544,13 +448,6 @@ static const struct locale_mimo_info *brcms_c_get_mimo_5g(u8 locale_idx)
 	return g_mimo_5g_table[locale_idx];
 }
 
-static int
-brcms_c_country_aggregate_map(struct brcms_cm_info *wlc_cm, const char *ccode,
-			  char *mapped_ccode, uint *mapped_regrev)
-{
-	return false;
-}
-
 /*
  * Indicates whether the country provided is valid to pass
  * to cfg80211 or not.

@@ -620,7 +517,6 @@ brcms_c_countrycode_map(struct brcms_cm_info *wlc_cm, const char *ccode,
 	const struct country_info *country;
 	uint srom_regrev = wlc_cm->srom_regrev;
 	const char *srom_ccode = wlc_cm->srom_ccode;
-	int mapped;
 
 	/* check for currently supported ccode size */
 	if (strlen(ccode) > (BRCM_CNTRY_BUF_SZ - 1)) {

@@ -639,12 +535,7 @@ brcms_c_countrycode_map(struct brcms_cm_info *wlc_cm, const char *ccode,
 	 */
 	if (!strcmp(srom_ccode, ccode)) {
 		*mapped_regrev = srom_regrev;
-		mapped = 0;
 		wiphy_err(wlc->wiphy, "srom_code == ccode %s\n", __func__);
-	} else {
-		mapped =
-		    brcms_c_country_aggregate_map(wlc_cm, ccode, mapped_ccode,
-					      mapped_regrev);
 	}
 
 	/* find the matching built-in country definition */

@@ -902,8 +793,6 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 
 		wlc_cm->bandstate[band->bandunit].restricted_channels =
 		    g_table_restricted_chan[li->restricted_channels];
-		wlc_cm->bandstate[band->bandunit].radar_channels =
-		    g_table_radar_set[li->radar_channels];
 
 		/*
 		 * set the channel availability, masking out the channels

@@ -938,17 +827,11 @@ brcms_c_set_country_common(struct brcms_cm_info *wlc_cm,
 {
 	const struct locale_info *locale;
 	struct brcms_c_info *wlc = wlc_cm->wlc;
-	char prev_country_abbrev[BRCM_CNTRY_BUF_SZ];
 
 	/* save current country state */
 	wlc_cm->country = country;
 
-	memset(&prev_country_abbrev, 0, BRCM_CNTRY_BUF_SZ);
-	strncpy(prev_country_abbrev, wlc_cm->country_abbrev,
-		BRCM_CNTRY_BUF_SZ - 1);
-
 	strncpy(wlc_cm->country_abbrev, country_abbrev, BRCM_CNTRY_BUF_SZ - 1);
-	strncpy(wlc_cm->ccode, ccode, BRCM_CNTRY_BUF_SZ - 1);
 	wlc_cm->regrev = regrev;
 
 	if ((wlc->pub->_n_enab & SUPPORT_11N) !=

@@ -1014,16 +897,12 @@ brcms_c_set_countrycode_rev(struct brcms_cm_info *wlc_cm,
 static int
 brcms_c_set_countrycode(struct brcms_cm_info *wlc_cm, const char *ccode)
 {
-	char country_abbrev[BRCM_CNTRY_BUF_SZ];
-	strncpy(country_abbrev, ccode, BRCM_CNTRY_BUF_SZ);
-	return brcms_c_set_countrycode_rev(wlc_cm, country_abbrev, ccode, -1);
+	return brcms_c_set_countrycode_rev(wlc_cm, ccode, ccode, -1);
 }
 
 struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 {
 	struct brcms_cm_info *wlc_cm;
-	char country_abbrev[BRCM_CNTRY_BUF_SZ];
-	const struct country_info *country;
 	struct brcms_pub *pub = wlc->pub;
 	struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom;

@@ -1040,21 +919,14 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2))
 		strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2));
 
-	/*
-	 * internal country information which must match
-	 * regulatory constraints in firmware
-	 */
-	memset(country_abbrev, 0, BRCM_CNTRY_BUF_SZ);
-	strncpy(country_abbrev, "X2", sizeof(country_abbrev) - 1);
-	country = brcms_c_country_lookup(wlc, country_abbrev);
-
 	/* save default country for exiting 11d regulatory mode */
-	strncpy(wlc->country_default, country_abbrev, BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->country_default, "X2", BRCM_CNTRY_BUF_SZ - 1);
 
 	/* initialize autocountry_default to driver default */
-	strncpy(wlc->autocountry_default, "X2", BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->autocountry_default, wlc->country_default,
+		BRCM_CNTRY_BUF_SZ - 1);
 
-	brcms_c_set_countrycode(wlc_cm, country_abbrev);
+	brcms_c_set_countrycode(wlc_cm, wlc->country_default);
 
 	return wlc_cm;
 }

-- 
1.7.9.5

[PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz band

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:50

brcmsmac doesn't currently support DFS or radar detection. Until it does
we need to avoid using DFS channels, so for now remove them from the
list of supported channels in the 5GHZ band.

Signed-off-by: Seth Forshee <redacted>
---
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |   48 --------------------
 1 file changed, 48 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 50f92a0..d2c0903 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -130,54 +130,6 @@ static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
 	CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 	CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 	CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
-	/* UNII-2 */
-	CHAN5GHZ(52,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(56,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(60,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(64,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	/* MID */
-	CHAN5GHZ(100,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(104,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(108,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(112,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(116,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(120,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(124,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(128,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(132,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(136,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(140,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
-		 IEEE80211_CHAN_NO_HT40MINUS),
 	/* UNII-3 */
 	CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 	CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),

-- 
1.7.9.5

RE: [PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz band

From: Brett Rudley <hidden>
Date: 2012-06-01 17:53:07

Not quite understanding this. Why does a STA need radar detection when the NO_IBSS flag is set?

Thanks
Brett

quoted hunk

-----Original Message-----
From: Seth Forshee [mailto:seth.forshee@canonical.com]
Sent: Friday, June 01, 2012 9:16 AM
To: Arend Van Spriel; linux-wireless@vger.kernel.org
Cc: Brett Rudley; Roland Vossen; Franky (Zhenhui) Lin; Kan Yan; Pieter-
Paul Giesberts; John W. Linville
Subject: [PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz
band

brcmsmac doesn't currently support DFS or radar detection. Until it does
we need to avoid using DFS channels, so for now remove them from the
list of supported channels in the 5GHZ band.

Signed-off-by: Seth Forshee <redacted>
---
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |   48 --------------
------
 1 file changed, 48 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 50f92a0..d2c0903 100644

--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -130,54 +130,6 @@ static struct ieee80211_channel

brcms_5ghz_nphy_chantable[] = {
 	CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 	CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 	CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
-	/* UNII-2 */
-	CHAN5GHZ(52,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(56,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(60,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(64,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	/* MID */
-	CHAN5GHZ(100,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(104,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(108,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(112,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(116,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(120,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(124,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(128,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(132,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN |
IEEE80211_CHAN_NO_HT40MINUS),
-	CHAN5GHZ(136,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
-	CHAN5GHZ(140,
-		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
-		 IEEE80211_CHAN_NO_HT40MINUS),
 	/* UNII-3 */
 	CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 	CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
--
1.7.9.5

Re: [PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz band

From: Seth Forshee <hidden>
Date: 2012-06-01 18:16:31

On Fri, Jun 01, 2012 at 05:52:55PM +0000, Brett Rudley wrote:

Not quite understanding this. Why does a STA need radar detection when the NO_IBSS flag is set?

Arend specifically suggested removing these channels due to lack of DFS
support [1]. I replied asking whether it was at least possible to detect
radar presence and stop transmitting in order to be able to use these
channels. The last response from Arend was that he was going to check on
the firmware capabilities.

I'm more than happy to drop this patch if there's not regulatory
impedement to operating on the DFS channels.

[1] http://www.spinics.net/lists/linux-wireless/msg91022.html

RE: [PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz band

From: Brett Rudley <hidden>
Date: 2012-06-01 18:38:32

On Fri, Jun 01, 2012 at 05:52:55PM +0000, Brett Rudley wrote:

quoted

Not quite understanding this. Why does a STA need radar detection when

the NO_IBSS flag is set?

Arend specifically suggested removing these channels due to lack of DFS
support [1]. I replied asking whether it was at least possible to detect
radar presence and stop transmitting in order to be able to use these
channels. The last response from Arend was that he was going to check on
the firmware capabilities.

Our ucode refrains from transmitting in the absence of all other 802.11 traffic on 5 Ghz channels.

I'm more than happy to drop this patch if there's not regulatory impedement to operating on the DFS channels.

Please.

Thanks
Brett

Re: [PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz band

From: Arend van Spriel <hidden>
Date: 2012-06-03 20:46:04

On 06/01/2012 08:16 PM, Seth Forshee wrote:

On Fri, Jun 01, 2012 at 05:52:55PM +0000, Brett Rudley wrote:

quoted

Not quite understanding this. Why does a STA need radar detection when the NO_IBSS flag is set?

Arend specifically suggested removing these channels due to lack of DFS
support [1]. I replied asking whether it was at least possible to detect
radar presence and stop transmitting in order to be able to use these
channels. The last response from Arend was that he was going to check on
the firmware capabilities.

I did not follow up with you, but I exchanged some emails with Brett on
this. As brcmsmac does not support AP mode (yet) it does not need radar
detection. Detection and appropriate action is coordinated by the AP.

I'm more than happy to drop this patch if there's not regulatory
impedement to operating on the DFS channels.

Let's drop it then. Sorry for not informing you sooner. I will have a
look at the other patches as well.

Gr. AvS

Re: [PATCH 05/10] brcm80211: smac: remove DFS channels from 5GHz band

From: Seth Forshee <hidden>
Date: 2012-06-04 13:19:15

On Sun, Jun 03, 2012 at 10:45:48PM +0200, Arend van Spriel wrote:

On 06/01/2012 08:16 PM, Seth Forshee wrote:

quoted

On Fri, Jun 01, 2012 at 05:52:55PM +0000, Brett Rudley wrote:

quoted

Not quite understanding this. Why does a STA need radar detection when the NO_IBSS flag is set?

Arend specifically suggested removing these channels due to lack of DFS
support [1]. I replied asking whether it was at least possible to detect
radar presence and stop transmitting in order to be able to use these
channels. The last response from Arend was that he was going to check on
the firmware capabilities.

I did not follow up with you, but I exchanged some emails with Brett on
this. As brcmsmac does not support AP mode (yet) it does not need radar
detection. Detection and appropriate action is coordinated by the AP.

quoted

I'm more than happy to drop this patch if there's not regulatory
impedement to operating on the DFS channels.

Let's drop it then. Sorry for not informing you sooner. I will have a
look at the other patches as well.

No problem. I dropped the patch locally on Friday and have been running
with it over the weekend. I'll wailt a bit longer before resending to
see if you notice anything else that should be changed.

Seth

[PATCH 06/10] brcm80211: smac: inform mac80211 of the X2 regulatory domain

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:53

brcmsmac implements enforcement of regulatory constraints internally,
using a Broadcom-specific world roaming domain named X2. Besides being
duplication of functionality this can also conflict with mac80211's
regulatory implementation, as mac80211 is unaware of the X2 domain and
thus might apply a more restrictive domain.

This patch is the first step in making brcmsmac cooperate with
mac80211's regulatory support. X2 is registered as a custom domain with
mac80211, so that at least both implementations will be enforcing the
same set of constraints. The internal enforcement of rules is kept for
now; this will be converted over to relying on mac80211 regulatory
enforcement in later patches.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c  |  350 ++++++++++----------
 drivers/net/wireless/brcm80211/brcmsmac/channel.h  |    1 +
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |    2 +
 3 files changed, 175 insertions(+), 178 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index c311ef7..56089d1 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -15,7 +15,9 @@
  */
 
 #include <linux/types.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
+#include <net/regulatory.h>
 
 #include <defs.h>
 #include "pub.h"

@@ -23,6 +25,7 @@
 #include "main.h"
 #include "stf.h"
 #include "channel.h"
+#include "mac80211_if.h"
 
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)

@@ -108,6 +111,39 @@
 				 (((c) < 100) ? 2 : \
 				 (((c) < 149) ? 3 : 4))))
 
+#define BRCM_2GHZ_2412_2462	REG_RULE(2412-10, 2462+10, 40, 0, 19, 0)
+#define BRCM_2GHZ_2467_2472	REG_RULE(2467-10, 2472+10, 20, 0, 19, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_NO_IBSS)
+
+#define BRCM_5GHZ_5180_5240	REG_RULE(5180-10, 5240+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_NO_IBSS)
+#define BRCM_5GHZ_5260_5320	REG_RULE(5260-10, 5320+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_DFS | \
+					 NL80211_RRF_NO_IBSS)
+#define BRCM_5GHZ_5500_5700	REG_RULE(5500-10, 5700+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_DFS | \
+					 NL80211_RRF_NO_IBSS)
+#define BRCM_5GHZ_5745_5825	REG_RULE(5745-10, 5825+10, 40, 0, 21, \
+					 NL80211_RRF_PASSIVE_SCAN | \
+					 NL80211_RRF_NO_IBSS)
+
+static const struct ieee80211_regdomain brcms_regdom_x2 = {
+	.n_reg_rules = 7,
+	.alpha2 = "X2",
+	.reg_rules = {
+		BRCM_2GHZ_2412_2462,
+		BRCM_2GHZ_2467_2472,
+		BRCM_5GHZ_5180_5240,
+		BRCM_5GHZ_5260_5320,
+		BRCM_5GHZ_5500_5700,
+		BRCM_5GHZ_5745_5825,
+	}
+};
+
 struct brcms_cm_band {
 	/* struct locale_info flags */
 	u8 locale_flags;

@@ -137,14 +173,15 @@ struct country_info {
 	const u8 locale_mimo_5G;	/* 5G mimo info */
 };
 
+struct brcms_regd {
+	struct country_info country;
+	const struct ieee80211_regdomain *regdomain;
+};
+
 struct brcms_cm_info {
 	struct brcms_pub *pub;
 	struct brcms_c_info *wlc;
-	char srom_ccode[BRCM_CNTRY_BUF_SZ];	/* Country Code in SROM */
-	uint srom_regrev;	/* Regulatory Rev for the SROM ccode */
-	const struct country_info *country;	/* current country def */
-	uint regrev;		/* current Regulatory Revision */
-	char country_abbrev[BRCM_CNTRY_BUF_SZ];	/* current advertised ccode */
+	const struct brcms_regd *world_regd;
 	/* per-band state (one per phy/radio) */
 	struct brcms_cm_band bandstate[MAXBANDS];
 	/* quiet channels currently for radar sensitivity or 11h support */

@@ -408,12 +445,12 @@ static const struct locale_mimo_info *g_mimo_5g_table[] = {
 	&locale_11n
 };
 
-static const struct {
-	char abbrev[BRCM_CNTRY_BUF_SZ];	/* country abbreviation */
-	struct country_info country;
-} cntry_locales[] = {
+static const struct brcms_regd cntry_locales[] = {
+	/* Worldwide RoW 2, must always be at index 0 */
 	{
-	"X2", LOCALES(i, 11, bn, 11n)},	/* Worldwide RoW 2 */
+		.country = LOCALES(i, 11, bn, 11n),
+		.regdomain = &brcms_regdom_x2,
+	},
 };
 
 static const struct locale_info *brcms_c_get_locale_2g(u8 locale_idx)

@@ -482,93 +519,24 @@ static bool brcms_c_country_valid(const char *ccode)
 	return true;
 }
 
-/* Lookup a country info structure from a null terminated country
- * abbreviation and regrev directly with no translation.
- */
-static const struct country_info *
-brcms_c_country_lookup_direct(const char *ccode, uint regrev)
-{
-	uint size, i;
-
-	/* Should just return 0 for single locale driver. */
-	/* Keep it this way in case we add more locales. (for now anyway) */
-
-	/*
-	 * all other country def arrays are for regrev == 0, so if
-	 * regrev is non-zero, fail
-	 */
-	if (regrev > 0)
-		return NULL;
-
-	/* find matched table entry from country code */
-	size = ARRAY_SIZE(cntry_locales);
-	for (i = 0; i < size; i++) {
-		if (strcmp(ccode, cntry_locales[i].abbrev) == 0)
-			return &cntry_locales[i].country;
-	}
-	return NULL;
-}
-
-static const struct country_info *
-brcms_c_countrycode_map(struct brcms_cm_info *wlc_cm, const char *ccode,
-			char *mapped_ccode, uint *mapped_regrev)
+static const struct brcms_regd *brcms_world_regd(const char *regdom, int len)
 {
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	const struct country_info *country;
-	uint srom_regrev = wlc_cm->srom_regrev;
-	const char *srom_ccode = wlc_cm->srom_ccode;
+	const struct brcms_regd *regd = NULL;
+	int i;
 
-	/* check for currently supported ccode size */
-	if (strlen(ccode) > (BRCM_CNTRY_BUF_SZ - 1)) {
-		wiphy_err(wlc->wiphy, "wl%d: %s: ccode \"%s\" too long for "
-			  "match\n", wlc->pub->unit, __func__, ccode);
-		return NULL;
-	}
-
-	/* default mapping is the given ccode and regrev 0 */
-	strncpy(mapped_ccode, ccode, BRCM_CNTRY_BUF_SZ);
-	*mapped_regrev = 0;
-
-	/* If the desired country code matches the srom country code,
-	 * then the mapped country is the srom regulatory rev.
-	 * Otherwise look for an aggregate mapping.
-	 */
-	if (!strcmp(srom_ccode, ccode)) {
-		*mapped_regrev = srom_regrev;
-		wiphy_err(wlc->wiphy, "srom_code == ccode %s\n", __func__);
-	}
-
-	/* find the matching built-in country definition */
-	country = brcms_c_country_lookup_direct(mapped_ccode, *mapped_regrev);
-
-	/* if there is not an exact rev match, default to rev zero */
-	if (country == NULL && *mapped_regrev != 0) {
-		*mapped_regrev = 0;
-		country =
-		    brcms_c_country_lookup_direct(mapped_ccode, *mapped_regrev);
+	for (i = 0; i < ARRAY_SIZE(cntry_locales); i++) {
+		if (!strncmp(regdom, cntry_locales[i].regdomain->alpha2, len)) {
+			regd = &cntry_locales[i];
+			break;
+		}
 	}
 
-	return country;
+	return regd;
 }
 
-/* Lookup a country info structure from a null terminated country code
- * The lookup is case sensitive.
- */
-static const struct country_info *
-brcms_c_country_lookup(struct brcms_c_info *wlc, const char *ccode)
+static const struct brcms_regd *brcms_default_world_regd(void)
 {
-	const struct country_info *country;
-	char mapped_ccode[BRCM_CNTRY_BUF_SZ];
-	uint mapped_regrev;
-
-	/*
-	 * map the country code to a built-in country code, regrev, and
-	 * country_info struct
-	 */
-	country = brcms_c_countrycode_map(wlc->cmi, ccode, mapped_ccode,
-					  &mapped_regrev);
-
-	return country;
+	return &cntry_locales[0];
 }
 
 /*

@@ -634,12 +602,6 @@ static bool brcms_c_japan_ccode(const char *ccode)
 		(ccode[1] == 'P' || (ccode[1] >= '1' && ccode[1] <= '9')));
 }
 
-/* Returns true if currently set country is Japan or variant */
-static bool brcms_c_japan(struct brcms_c_info *wlc)
-{
-	return brcms_c_japan_ccode(wlc->cmi->country_abbrev);
-}
-
 static void
 brcms_c_channel_min_txpower_limits_with_local_constraint(
 		struct brcms_cm_info *wlc_cm, struct txpwr_limits *txpwr,

@@ -743,8 +705,8 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
 		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\" "
 			  "nbands %d bandlocked %d\n", wlc->pub->unit,
-			  __func__, wlc_cm->country_abbrev, wlc->pub->_nbands,
-			  wlc->bandlocked);
+			  __func__, wlc_cm->world_regd->regdomain->alpha2,
+			  wlc->pub->_nbands, wlc->bandlocked);
 	} else if (mboolisset(wlc->pub->radio_disabled,
 			      WL_RADIO_COUNTRY_DISABLE)) {
 		/*

@@ -753,15 +715,6 @@ static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
 		 */
 		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
 	}
-
-	/*
-	 * Now that the country abbreviation is set, if the radio supports 2G,
-	 * then set channel 14 restrictions based on the new locale.
-	 */
-	if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
-		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
-						     brcms_c_japan(wlc) ? true :
-						     false);
 }
 
 static int

@@ -820,20 +773,13 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
  * information found with the country code.
  */
 static void
-brcms_c_set_country_common(struct brcms_cm_info *wlc_cm,
-		       const char *country_abbrev,
-		       const char *ccode, uint regrev,
-		       const struct country_info *country)
+brcms_c_set_country(struct brcms_cm_info *wlc_cm,
+		    const struct brcms_regd *regd)
 {
+	const struct country_info *country = &regd->country;
 	const struct locale_info *locale;
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 
-	/* save current country state */
-	wlc_cm->country = country;
-
-	strncpy(wlc_cm->country_abbrev, country_abbrev, BRCM_CNTRY_BUF_SZ - 1);
-	wlc_cm->regrev = regrev;
-
 	if ((wlc->pub->_n_enab & SUPPORT_11N) !=
 	    wlc->protection->nmode_user)
 		brcms_c_set_nmode(wlc);

@@ -852,59 +798,13 @@ brcms_c_set_country_common(struct brcms_cm_info *wlc_cm,
 	return;
 }
 
-static int
-brcms_c_set_countrycode_rev(struct brcms_cm_info *wlc_cm,
-			const char *country_abbrev,
-			const char *ccode, int regrev)
-{
-	const struct country_info *country;
-	char mapped_ccode[BRCM_CNTRY_BUF_SZ];
-	uint mapped_regrev;
-
-	/* if regrev is -1, lookup the mapped country code,
-	 * otherwise use the ccode and regrev directly
-	 */
-	if (regrev == -1) {
-		/*
-		 * map the country code to a built-in country
-		 * code, regrev, and country_info
-		 */
-		country =
-		    brcms_c_countrycode_map(wlc_cm, ccode, mapped_ccode,
-					&mapped_regrev);
-	} else {
-		/* find the matching built-in country definition */
-		country = brcms_c_country_lookup_direct(ccode, regrev);
-		strncpy(mapped_ccode, ccode, BRCM_CNTRY_BUF_SZ);
-		mapped_regrev = regrev;
-	}
-
-	if (country == NULL)
-		return -EINVAL;
-
-	/* set the driver state for the country */
-	brcms_c_set_country_common(wlc_cm, country_abbrev, mapped_ccode,
-			       mapped_regrev, country);
-
-	return 0;
-}
-
-/*
- * set the driver's current country and regulatory information using
- * a country code as the source. Lookup built in country information
- * found with the country code.
- */
-static int
-brcms_c_set_countrycode(struct brcms_cm_info *wlc_cm, const char *ccode)
-{
-	return brcms_c_set_countrycode_rev(wlc_cm, ccode, ccode, -1);
-}
-
 struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 {
 	struct brcms_cm_info *wlc_cm;
 	struct brcms_pub *pub = wlc->pub;
 	struct ssb_sprom *sprom = &wlc->hw->d11core->bus->sprom;
+	const char *ccode = sprom->alpha2;
+	int ccode_len = sizeof(sprom->alpha2);
 
 	BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);

@@ -916,17 +816,27 @@ struct brcms_cm_info *brcms_c_channel_mgr_attach(struct brcms_c_info *wlc)
 	wlc->cmi = wlc_cm;
 
 	/* store the country code for passing up as a regulatory hint */
-	if (sprom->alpha2 && brcms_c_country_valid(sprom->alpha2))
-		strncpy(wlc->pub->srom_ccode, sprom->alpha2, sizeof(sprom->alpha2));
+	wlc_cm->world_regd = brcms_world_regd(ccode, ccode_len);
+	if (brcms_c_country_valid(ccode))
+		strncpy(wlc->pub->srom_ccode, ccode, ccode_len);
+
+	/*
+	 * If no custom world domain is found in the SROM, use the
+	 * default "X2" domain.
+	 */
+	if (!wlc_cm->world_regd) {
+		wlc_cm->world_regd = brcms_default_world_regd();
+		ccode = wlc_cm->world_regd->regdomain->alpha2;
+		ccode_len = BRCM_CNTRY_BUF_SZ - 1;
+	}
 
 	/* save default country for exiting 11d regulatory mode */
-	strncpy(wlc->country_default, "X2", BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->country_default, ccode, ccode_len);
 
 	/* initialize autocountry_default to driver default */
-	strncpy(wlc->autocountry_default, wlc->country_default,
-		BRCM_CNTRY_BUF_SZ - 1);
+	strncpy(wlc->autocountry_default, ccode, ccode_len);
 
-	brcms_c_set_countrycode(wlc_cm, wlc->country_default);
+	brcms_c_set_country(wlc_cm, wlc_cm->world_regd);
 
 	return wlc_cm;
 }

@@ -994,13 +904,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 	memset(txpwr, 0, sizeof(struct txpwr_limits));
 
-	if (!brcms_c_valid_chanspec_db(wlc_cm, chanspec)) {
-		country = brcms_c_country_lookup(wlc, wlc->autocountry_default);
-		if (country == NULL)
-			return;
-	} else {
-		country = wlc_cm->country;
-	}
+	country = &wlc_cm->world_regd->country;
 
 	chan = CHSPEC_CHANNEL(chanspec);
 	band = wlc->bandstate[chspec_bandunit(chanspec)];

@@ -1252,3 +1156,93 @@ bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm, u16 chspec)
 {
 	return brcms_c_valid_chanspec_ext(wlc_cm, chspec, true);
 }
+
+static void
+brcms_reg_apply_beaconing_flags(struct wiphy *wiphy,
+				enum nl80211_reg_initiator initiator)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	const struct ieee80211_reg_rule *rule;
+	int band, i, ret;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (i = 0; i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+
+			if (ch->flags & IEEE80211_CHAN_RADAR)
+				continue;
+
+			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
+				ret = freq_reg_info(wiphy, ch->center_freq,
+						    0, &rule);
+				if (ret)
+					continue;
+
+				if (!(rule->flags & NL80211_RRF_NO_IBSS))
+					ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
+				if (!(rule->flags & NL80211_RRF_PASSIVE_SCAN))
+					ch->flags &=
+						~IEEE80211_CHAN_PASSIVE_SCAN;
+			} else if (ch->beacon_found) {
+				ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
+					       IEEE80211_CHAN_PASSIVE_SCAN);
+			}
+		}
+	}
+}
+
+static int brcms_reg_notifier(struct wiphy *wiphy,
+			      struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct brcms_info *wl = hw->priv;
+	struct brcms_c_info *wlc = wl->wlc;
+
+	if (request && request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
+		brcms_reg_apply_beaconing_flags(wiphy, request->initiator);
+
+	if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
+		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
+					brcms_c_japan_ccode(request->alpha2));
+
+	return 0;
+}
+
+void brcms_c_regd_init(struct brcms_c_info *wlc)
+{
+	struct wiphy *wiphy = wlc->wiphy;
+	const struct brcms_regd *regd = wlc->cmi->world_regd;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	struct brcms_chanvec sup_chan;
+	struct brcms_band *band;
+	int band_idx, i;
+
+	/* Disable any channels not supported by the phy */
+	for (band_idx = 0; band_idx < IEEE80211_NUM_BANDS; band_idx++) {
+		if (band_idx == IEEE80211_BAND_2GHZ)
+			band = wlc->bandstate[BAND_2G_INDEX];
+		else
+			band = wlc->bandstate[BAND_5G_INDEX];
+		wlc_phy_chanspec_band_validch(band->pi, band->bandtype,
+					      &sup_chan);
+
+		sband = wiphy->bands[band_idx];
+		for (i = 0; i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+			if (!isset(sup_chan.vec, ch->hw_value))
+				ch->flags |= IEEE80211_CHAN_DISABLED;
+		}
+	}
+
+	wlc->wiphy->reg_notifier = brcms_reg_notifier;
+	wlc->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
+			     WIPHY_FLAG_STRICT_REGULATORY;
+	wiphy_apply_custom_regulatory(wlc->wiphy, regd->regdomain);
+	brcms_reg_apply_beaconing_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER);
+}

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.h b/drivers/net/wireless/brcm80211/brcmsmac/channel.h
index 808cb4f..de9887d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.h

@@ -49,5 +49,6 @@ extern void brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm,
 extern void brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm,
 				     u16 chanspec,
 				     u8 local_constraint_qdbm);
+extern void brcms_c_regd_init(struct brcms_c_info *wlc);
 
 #endif				/* _WLC_CHANNEL_H */

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index d2c0903..a03b632 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -1010,6 +1010,8 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev)
 		goto fail;
 	}
 
+	brcms_c_regd_init(wl->wlc);
+
 	memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
 	if (WARN_ON(!is_valid_ether_addr(perm)))
 		goto fail;

-- 
1.7.9.5

[PATCH 07/10] brcm80211: smac: enable/disable radio on regulatory updates

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:55

Currently the radio disable state is only updated during initialization,
and it's only checked against the internal world domain. This is
unnecessary, as there are always valid channels against this domain.
Instead, check whether any channels are enabled in the regulatory
notifier and update the radio state accordingly.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |   67 ++++++++-------------
 1 file changed, 26 insertions(+), 41 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 56089d1..9dbc1dd 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -677,46 +677,6 @@ brcms_c_channel_min_txpower_limits_with_local_constraint(
 
 }
 
-/* Update the radio state (enable/disable) and tx power targets
- * based on a new set of channel/regulatory information
- */
-static void brcms_c_channels_commit(struct brcms_cm_info *wlc_cm)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint chan;
-
-	/* search for the existence of any valid channel */
-	for (chan = 0; chan < MAXCHANNEL; chan++) {
-		if (brcms_c_valid_channel20_db(wlc->cmi, chan))
-			break;
-	}
-	if (chan == MAXCHANNEL)
-		chan = INVCHANNEL;
-
-	/*
-	 * based on the channel search above, set or
-	 * clear WL_RADIO_COUNTRY_DISABLE.
-	 */
-	if (chan == INVCHANNEL) {
-		/*
-		 * country/locale with no valid channels, set
-		 * the radio disable bit
-		 */
-		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
-		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\" "
-			  "nbands %d bandlocked %d\n", wlc->pub->unit,
-			  __func__, wlc_cm->world_regd->regdomain->alpha2,
-			  wlc->pub->_nbands, wlc->bandlocked);
-	} else if (mboolisset(wlc->pub->radio_disabled,
-			      WL_RADIO_COUNTRY_DISABLE)) {
-		/*
-		 * country/locale with valid channel, clear
-		 * the radio disable bit
-		 */
-		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
-	}
-}
-
 static int
 brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 		      const struct country_info *country)

@@ -762,7 +722,6 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 	}
 
 	brcms_c_quiet_channels_reset(wlc_cm);
-	brcms_c_channels_commit(wlc_cm);
 
 	return 0;
 }

@@ -1202,10 +1161,36 @@ static int brcms_reg_notifier(struct wiphy *wiphy,
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct brcms_info *wl = hw->priv;
 	struct brcms_c_info *wlc = wl->wlc;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	int band, i;
+	bool ch_found = false;
 
 	if (request && request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)
 		brcms_reg_apply_beaconing_flags(wiphy, request->initiator);
 
+	/* Disable radio if all channels disallowed by regulatory */
+	for (band = 0; !ch_found && band < IEEE80211_NUM_BANDS; band++) {
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (i = 0; !ch_found && i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+
+			if (!(ch->flags & IEEE80211_CHAN_DISABLED))
+				ch_found = true;
+		}
+	}
+
+	if (likely(ch_found)) {
+		mboolclr(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
+	} else {
+		mboolset(wlc->pub->radio_disabled, WL_RADIO_COUNTRY_DISABLE);
+		wiphy_err(wlc->wiphy, "wl%d: %s: no valid channel for \"%s\"\n",
+			  wlc->pub->unit, __func__, request->alpha2);
+	}
+
 	if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G)
 		wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi,
 					brcms_c_japan_ccode(request->alpha2));

-- 
1.7.9.5

[PATCH 08/10] brcm80211: smac: use mac80211 channel data for tx power limits

From: Seth Forshee <hidden>
Date: 2012-06-01 16:15:57

Currently the limits from the internal X2 domain are used, regardless
of what regulatory rules are in effect. Instead use the power limits set
by the higher-level regulatory support.

The rules for the MIMO power limits are still always derived from the
world domain. Guidance from Broadcom is needed on how these limits
should be determined for other regulatory domains.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |   73 ++++-----------------
 1 file changed, 14 insertions(+), 59 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 9dbc1dd..19be4f7 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -74,15 +74,6 @@
 /* max of BAND_5G_PWR_LVLS and 14 for 2.4 GHz */
 #define BRCMS_MAXPWR_MIMO_TBL_SIZE	14
 
-/* power level in group of 2.4GHz band channels:
- * maxpwr[0] - CCK  channels [1]
- * maxpwr[1] - CCK  channels [2-10]
- * maxpwr[2] - CCK  channels [11-14]
- * maxpwr[3] - OFDM channels [1]
- * maxpwr[4] - OFDM channels [2-10]
- * maxpwr[5] - OFDM channels [11-14]
- */
-
 /* maxpwr mapping to 5GHz band channels:
  * maxpwr[0] - channels [34-48]
  * maxpwr[1] - channels [52-60]

@@ -101,10 +92,6 @@
 #define LOCALES(band2, band5, mimo2, mimo5) \
 		{LC_2G(band2), LC_5G(band5), LC(mimo2), LC(mimo5)}
 
-/* macro to get 2.4 GHz channel group index for tx power */
-#define CHANNEL_POWER_IDX_2G_CCK(c) (((c) < 2) ? 0 : (((c) < 11) ? 1 : 2))
-#define CHANNEL_POWER_IDX_2G_OFDM(c) (((c) < 2) ? 3 : (((c) < 11) ? 4 : 5))
-
 /* macro to get 5 GHz channel group index for tx power */
 #define CHANNEL_POWER_IDX_5G(c) (((c) < 52) ? 0 : \
 				 (((c) < 62) ? 1 : \

@@ -194,8 +181,6 @@ struct locale_info {
 	u32 valid_channels;
 	/* List of channels used only if APs are detected */
 	u8 restricted_channels;
-	/* Max tx pwr in qdBm for each sub-band */
-	s8 maxpwr[BRCMS_MAXPWR_TBL_SIZE];
 	u8 flags;
 };

@@ -391,8 +376,6 @@ static void brcms_c_locale_get_channels(const struct locale_info *locale,
 static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
 	LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13,
 	LOCALE_RESTRICTED_SET_2G_SHORT,
-	{QDB(19), QDB(19), QDB(19),
-	 QDB(19), QDB(19), QDB(19)},
 	BRCMS_EIRP
 };

@@ -403,7 +386,6 @@ static const struct locale_info locale_11 = {
 	/* locale 11. channel 36 - 48, 52 - 64, 100 - 140, 149 - 165 */
 	LOCALE_CHAN_36_64 | LOCALE_CHAN_100_140 | LOCALE_CHAN_149_165,
 	LOCALE_RESTRICTED_NONE,
-	{QDB(21), QDB(21), QDB(21), QDB(21), QDB(21)},
 	BRCMS_EIRP | BRCMS_DFS_EU
 };

@@ -847,6 +829,7 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 		       struct txpwr_limits *txpwr)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
+	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
 	uint i;
 	uint chan;
 	int maxpwr;

@@ -855,7 +838,6 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	struct brcms_band *band;
 	const struct locale_info *li;
 	int conducted_max = BRCMS_TXPWR_MAX;
-	int conducted_ofdm_max = BRCMS_TXPWR_MAX;
 	const struct locale_mimo_info *li_mimo;
 	int maxpwr20, maxpwr40;
 	int maxpwr_idx;

@@ -863,6 +845,9 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 	memset(txpwr, 0, sizeof(struct txpwr_limits));
 
+	if (WARN_ON(!ch))
+		return;
+
 	country = &wlc_cm->world_regd->country;
 
 	chan = CHSPEC_CHANNEL(chanspec);

@@ -875,49 +860,24 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	    brcms_c_get_mimo_5g(country->locale_mimo_5G) :
 	    brcms_c_get_mimo_2g(country->locale_mimo_2G);
 
-	if (li->flags & BRCMS_EIRP) {
-		delta = band->antgain;
-	} else {
-		delta = 0;
-		if (band->antgain > QDB(6))
-			delta = band->antgain - QDB(6);	/* Excess over 6 dB */
-	}
+	delta = band->antgain;
 
-	if (li == &locale_i) {
+	if (li == &locale_i)
 		conducted_max = QDB(22);
-		conducted_ofdm_max = QDB(22);
-	}
+
+	maxpwr = QDB(ch->max_power) - delta;
+	maxpwr = max(maxpwr, 0);
+	maxpwr = min(maxpwr, conducted_max);
 
 	/* CCK txpwr limits for 2.4G band */
 	if (band->bandtype == BRCM_BAND_2G) {
-		maxpwr = li->maxpwr[CHANNEL_POWER_IDX_2G_CCK(chan)];
-
-		maxpwr = maxpwr - delta;
-		maxpwr = max(maxpwr, 0);
-		maxpwr = min(maxpwr, conducted_max);
-
 		for (i = 0; i < BRCMS_NUM_RATES_CCK; i++)
 			txpwr->cck[i] = (u8) maxpwr;
 	}
 
-	/* OFDM txpwr limits for 2.4G or 5G bands */
-	if (band->bandtype == BRCM_BAND_2G)
-		maxpwr = li->maxpwr[CHANNEL_POWER_IDX_2G_OFDM(chan)];
-	else
-		maxpwr = li->maxpwr[CHANNEL_POWER_IDX_5G(chan)];
-
-	maxpwr = maxpwr - delta;
-	maxpwr = max(maxpwr, 0);
-	maxpwr = min(maxpwr, conducted_ofdm_max);
-
-	/* Keep OFDM lmit below CCK limit */
-	if (band->bandtype == BRCM_BAND_2G)
-		maxpwr = min_t(int, maxpwr, txpwr->cck[0]);
-
-	for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
+	for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++) {
 		txpwr->ofdm[i] = (u8) maxpwr;
 
-	for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++) {
 		/*
 		 * OFDM 40 MHz SISO has the same power as the corresponding
 		 * MCS0-7 rate unless overriden by the locale specific code.

@@ -932,14 +892,9 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 		txpwr->ofdm_40_cdd[i] = 0;
 	}
 
-	/* MIMO/HT specific limits */
-	if (li_mimo->flags & BRCMS_EIRP) {
-		delta = band->antgain;
-	} else {
-		delta = 0;
-		if (band->antgain > QDB(6))
-			delta = band->antgain - QDB(6);	/* Excess over 6 dB */
-	}
+	delta = 0;
+	if (band->antgain > QDB(6))
+		delta = band->antgain - QDB(6);	/* Excess over 6 dB */
 
 	if (band->bandtype == BRCM_BAND_2G)
 		maxpwr_idx = (chan - 1);

-- 
1.7.9.5

[PATCH 09/10] brcm80211: smac: don't validate channels against internal regulatory data

From: Seth Forshee <hidden>
Date: 2012-06-01 16:16:00

The core regulatory support will disable channels not allowed by
regulatory rules, so brcmsmac doesn't need to check whether or not the
requested channel is permitted by regulatory.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |  344 +--------------------
 1 file changed, 6 insertions(+), 338 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 19be4f7..286cb3d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -30,40 +30,6 @@
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)
 
-#define  LOCALE_CHAN_01_11	 (1<<0)
-#define  LOCALE_CHAN_12_13	 (1<<1)
-#define  LOCALE_CHAN_14		 (1<<2)
-#define  LOCALE_SET_5G_LOW_JP1   (1<<3)	/* 34-48, step 2 */
-#define  LOCALE_SET_5G_LOW_JP2   (1<<4)	/* 34-46, step 4 */
-#define  LOCALE_SET_5G_LOW1      (1<<5)	/* 36-48, step 4 */
-#define  LOCALE_SET_5G_LOW2      (1<<6)	/* 52 */
-#define  LOCALE_SET_5G_LOW3      (1<<7)	/* 56-64, step 4 */
-#define  LOCALE_SET_5G_MID1      (1<<8)	/* 100-116, step 4 */
-#define  LOCALE_SET_5G_MID2	 (1<<9)	/* 120-124, step 4 */
-#define  LOCALE_SET_5G_MID3      (1<<10)	/* 128 */
-#define  LOCALE_SET_5G_HIGH1     (1<<11)	/* 132-140, step 4 */
-#define  LOCALE_SET_5G_HIGH2     (1<<12)	/* 149-161, step 4 */
-#define  LOCALE_SET_5G_HIGH3     (1<<13)	/* 165 */
-#define  LOCALE_CHAN_52_140_ALL  (1<<14)
-#define  LOCALE_SET_5G_HIGH4     (1<<15)	/* 184-216 */
-
-#define  LOCALE_CHAN_36_64	(LOCALE_SET_5G_LOW1 | \
-				 LOCALE_SET_5G_LOW2 | \
-				 LOCALE_SET_5G_LOW3)
-#define  LOCALE_CHAN_52_64	(LOCALE_SET_5G_LOW2 | LOCALE_SET_5G_LOW3)
-#define  LOCALE_CHAN_100_124	(LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2)
-#define  LOCALE_CHAN_100_140	(LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2 | \
-				  LOCALE_SET_5G_MID3 | LOCALE_SET_5G_HIGH1)
-#define  LOCALE_CHAN_149_165	(LOCALE_SET_5G_HIGH2 | LOCALE_SET_5G_HIGH3)
-#define  LOCALE_CHAN_184_216	LOCALE_SET_5G_HIGH4
-
-#define  LOCALE_CHAN_01_14	(LOCALE_CHAN_01_11 | \
-				 LOCALE_CHAN_12_13 | \
-				 LOCALE_CHAN_14)
-
-#define  LOCALE_RESTRICTED_NONE		  0
-#define  LOCALE_RESTRICTED_SET_2G_SHORT   1
-
 #define LOCALE_2G_IDX_i			0
 #define LOCALE_5G_IDX_11		0
 #define LOCALE_MIMO_IDX_bn		0

@@ -134,10 +100,6 @@ static const struct ieee80211_regdomain brcms_regdom_x2 = {
 struct brcms_cm_band {
 	/* struct locale_info flags */
 	u8 locale_flags;
-	/* List of valid channels in the country */
-	struct brcms_chanvec valid_channels;
-	/* List of restricted use channels */
-	const struct brcms_chanvec *restricted_channels;
 };
 
  /* locale per-channel tx power limits for MIMO frames

@@ -171,211 +133,17 @@ struct brcms_cm_info {
 	const struct brcms_regd *world_regd;
 	/* per-band state (one per phy/radio) */
 	struct brcms_cm_band bandstate[MAXBANDS];
-	/* quiet channels currently for radar sensitivity or 11h support */
-	/* channels on which we cannot transmit */
-	struct brcms_chanvec quiet_channels;
 };
 
 /* locale channel and power info. */
 struct locale_info {
-	u32 valid_channels;
-	/* List of channels used only if APs are detected */
-	u8 restricted_channels;
 	u8 flags;
 };
 
-/* Regulatory Matrix Spreadsheet (CLM) MIMO v3.7.9 */
-
-/*
- * Some common channel sets
- */
-
-/* No channels */
-static const struct brcms_chanvec chanvec_none = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/*
- * Restricted channel sets
- */
-
-/* Channels 12, 13 */
-static const struct brcms_chanvec restricted_set_2g_short = {
-	{0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-/* global memory to provide working buffer for expanded locale */
-
-static const struct brcms_chanvec *g_table_restricted_chan[] = {
-	&chanvec_none,		/* restricted_set_none */
-	&restricted_set_2g_short,
-};
-
-static const struct brcms_chanvec locale_2g_01_11 = {
-	{0xfe, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_2g_12_13 = {
-	{0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_2g_14 = {
-	{0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW_JP1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x54, 0x55, 0x01, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW_JP2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x44, 0x44, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x01, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_LOW3 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,
-	 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_MID1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x10, 0x11, 0x11, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_MID2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_MID3 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH1 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH2 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x20, 0x22, 0x02, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH3 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_52_140_ALL = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x11,
-	 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
-	 0x11, 0x11, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00}
-};
-
-static const struct brcms_chanvec locale_5g_HIGH4 = {
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,
-	 0x11, 0x11, 0x11, 0x11}
-};
-
-static const struct brcms_chanvec *g_table_locale_base[] = {
-	&locale_2g_01_11,
-	&locale_2g_12_13,
-	&locale_2g_14,
-	&locale_5g_LOW_JP1,
-	&locale_5g_LOW_JP2,
-	&locale_5g_LOW1,
-	&locale_5g_LOW2,
-	&locale_5g_LOW3,
-	&locale_5g_MID1,
-	&locale_5g_MID2,
-	&locale_5g_MID3,
-	&locale_5g_HIGH1,
-	&locale_5g_HIGH2,
-	&locale_5g_HIGH3,
-	&locale_5g_52_140_ALL,
-	&locale_5g_HIGH4
-};
-
-static void brcms_c_locale_add_channels(struct brcms_chanvec *target,
-				    const struct brcms_chanvec *channels)
-{
-	u8 i;
-	for (i = 0; i < sizeof(struct brcms_chanvec); i++)
-		target->vec[i] |= channels->vec[i];
-}
-
-static void brcms_c_locale_get_channels(const struct locale_info *locale,
-				    struct brcms_chanvec *channels)
-{
-	u8 i;
-
-	memset(channels, 0, sizeof(struct brcms_chanvec));
-
-	for (i = 0; i < ARRAY_SIZE(g_table_locale_base); i++) {
-		if (locale->valid_channels & (1 << i))
-			brcms_c_locale_add_channels(channels,
-						g_table_locale_base[i]);
-	}
-}
-
 /*
  * Locale Definitions - 2.4 GHz
  */
 static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
-	LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13,
-	LOCALE_RESTRICTED_SET_2G_SHORT,
 	BRCMS_EIRP
 };

@@ -383,9 +151,6 @@ static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
  * Locale Definitions - 5 GHz
  */
 static const struct locale_info locale_11 = {
-	/* locale 11. channel 36 - 48, 52 - 64, 100 - 140, 149 - 165 */
-	LOCALE_CHAN_36_64 | LOCALE_CHAN_100_140 | LOCALE_CHAN_149_165,
-	LOCALE_RESTRICTED_NONE,
 	BRCMS_EIRP | BRCMS_DFS_EU
 };

@@ -521,62 +286,6 @@ static const struct brcms_regd *brcms_default_world_regd(void)
 	return &cntry_locales[0];
 }
 
-/*
- * reset the quiet channels vector to the union
- * of the restricted and radar channel sets
- */
-static void brcms_c_quiet_channels_reset(struct brcms_cm_info *wlc_cm)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint i, j;
-	struct brcms_band *band;
-	const struct brcms_chanvec *chanvec;
-
-	memset(&wlc_cm->quiet_channels, 0, sizeof(struct brcms_chanvec));
-
-	band = wlc->band;
-	for (i = 0; i < wlc->pub->_nbands;
-	     i++, band = wlc->bandstate[OTHERBANDUNIT(wlc)]) {
-
-		/* initialize quiet channels for restricted channels */
-		chanvec = wlc_cm->bandstate[band->bandunit].restricted_channels;
-		for (j = 0; j < sizeof(struct brcms_chanvec); j++)
-			wlc_cm->quiet_channels.vec[j] |= chanvec->vec[j];
-
-	}
-}
-
-/* Is the channel valid for the current locale and current band? */
-static bool brcms_c_valid_channel20(struct brcms_cm_info *wlc_cm, uint val)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-
-	return ((val < MAXCHANNEL) &&
-		isset(wlc_cm->bandstate[wlc->band->bandunit].valid_channels.vec,
-		      val));
-}
-
-/* Is the channel valid for the current locale and specified band? */
-static bool brcms_c_valid_channel20_in_band(struct brcms_cm_info *wlc_cm,
-					    uint bandunit, uint val)
-{
-	return ((val < MAXCHANNEL)
-		&& isset(wlc_cm->bandstate[bandunit].valid_channels.vec, val));
-}
-
-/* Is the channel valid for the current locale? (but don't consider channels not
- *   available due to bandlocking)
- */
-static bool brcms_c_valid_channel20_db(struct brcms_cm_info *wlc_cm, uint val)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-
-	return brcms_c_valid_channel20(wlc->cmi, val) ||
-		(!wlc->bandlocked
-		 && brcms_c_valid_channel20_in_band(wlc->cmi,
-						    OTHERBANDUNIT(wlc), val));
-}
-
 /* JP, J1 - J10 are Japan ccodes */
 static bool brcms_c_japan_ccode(const char *ccode)
 {

@@ -664,10 +373,9 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 		      const struct country_info *country)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint i, j;
+	uint i;
 	struct brcms_band *band;
 	const struct locale_info *li;
-	struct brcms_chanvec sup_chan;
 	const struct locale_mimo_info *li_mimo;
 
 	band = wlc->band;

@@ -685,26 +393,8 @@ brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
 		/* merge the mimo non-mimo locale flags */
 		wlc_cm->bandstate[band->bandunit].locale_flags |=
 		    li_mimo->flags;
-
-		wlc_cm->bandstate[band->bandunit].restricted_channels =
-		    g_table_restricted_chan[li->restricted_channels];
-
-		/*
-		 * set the channel availability, masking out the channels
-		 * that may not be supported on this phy.
-		 */
-		wlc_phy_chanspec_band_validch(band->pi, band->bandtype,
-					      &sup_chan);
-		brcms_c_locale_get_channels(li,
-					&wlc_cm->bandstate[band->bandunit].
-					valid_channels);
-		for (j = 0; j < sizeof(struct brcms_chanvec); j++)
-			wlc_cm->bandstate[band->bandunit].valid_channels.
-			    vec[j] &= sup_chan.vec[j];
 	}
 
-	brcms_c_quiet_channels_reset(wlc_cm);
-
 	return 0;
 }

@@ -794,23 +484,12 @@ brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
 	return wlc_cm->bandstate[bandunit].locale_flags;
 }
 
-static bool
-brcms_c_quiet_chanspec(struct brcms_cm_info *wlc_cm, u16 chspec)
-{
-	return (wlc_cm->wlc->pub->_n_enab & SUPPORT_11N) &&
-		CHSPEC_IS40(chspec) ?
-		(isset(wlc_cm->quiet_channels.vec,
-		       lower_20_sb(CHSPEC_CHANNEL(chspec))) ||
-		 isset(wlc_cm->quiet_channels.vec,
-		       upper_20_sb(CHSPEC_CHANNEL(chspec)))) :
-		isset(wlc_cm->quiet_channels.vec, CHSPEC_CHANNEL(chspec));
-}
-
 void
 brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 			 u8 local_constraint_qdbm)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
+	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
 	struct txpwr_limits txpwr;
 
 	brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);

@@ -820,7 +499,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	);
 
 	brcms_b_set_chanspec(wlc->hw, chanspec,
-			      (brcms_c_quiet_chanspec(wlc_cm, chanspec) != 0),
+			      !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN),
 			      &txpwr);
 }

@@ -1036,8 +715,7 @@ static bool brcms_c_chspec_malformed(u16 chanspec)
  * and they are also a legal HT combination
  */
 static bool
-brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec,
-			   bool dualband)
+brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	u8 channel = CHSPEC_CHANNEL(chspec);

@@ -1053,22 +731,12 @@ brcms_c_valid_chanspec_ext(struct brcms_cm_info *wlc_cm, u16 chspec,
 	    chspec_bandunit(chspec))
 		return false;
 
-	/* Check a 20Mhz channel */
-	if (CHSPEC_IS20(chspec)) {
-		if (dualband)
-			return brcms_c_valid_channel20_db(wlc_cm->wlc->cmi,
-							  channel);
-		else
-			return brcms_c_valid_channel20(wlc_cm->wlc->cmi,
-						       channel);
-	}
-
-	return false;
+	return true;
 }
 
 bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm, u16 chspec)
 {
-	return brcms_c_valid_chanspec_ext(wlc_cm, chspec, true);
+	return brcms_c_valid_chanspec_ext(wlc_cm, chspec);
 }
 
 static void

-- 
1.7.9.5

[PATCH 10/10] brcm80211: smac: use current regulatory domain when checking whether OFDM is allowed

From: Seth Forshee <hidden>
Date: 2012-06-01 16:16:02

The brcmsmac internal regulatory data is being used to determine whether
OFDM should be allowed, and this is only done once during
initialization. To be effective this needs to be checked against
mac80211's regulatory rules for the current channel.

Reviewed-by: Arend Van Spriel <redacted>
Reviewed-by: Pieter-Paul Giesberts <redacted>
Signed-off-by: Seth Forshee <redacted>
---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c |  132 +++------------------
 drivers/net/wireless/brcm80211/brcmsmac/channel.h |    3 -
 drivers/net/wireless/brcm80211/brcmsmac/main.c    |    6 +-
 3 files changed, 15 insertions(+), 126 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 286cb3d..5cc74f8 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c

@@ -30,13 +30,9 @@
 /* QDB() macro takes a dB value and converts to a quarter dB value */
 #define QDB(n) ((n) * BRCMS_TXPWR_DB_FACTOR)
 
-#define LOCALE_2G_IDX_i			0
-#define LOCALE_5G_IDX_11		0
 #define LOCALE_MIMO_IDX_bn		0
 #define LOCALE_MIMO_IDX_11n		0
 
-/* max of BAND_5G_PWR_LVLS and 6 for 2.4 GHz */
-#define BRCMS_MAXPWR_TBL_SIZE		6
 /* max of BAND_5G_PWR_LVLS and 14 for 2.4 GHz */
 #define BRCMS_MAXPWR_MIMO_TBL_SIZE	14

@@ -51,12 +47,8 @@
 
 #define LC(id)	LOCALE_MIMO_IDX_ ## id
 
-#define LC_2G(id)	LOCALE_2G_IDX_ ## id
-
-#define LC_5G(id)	LOCALE_5G_IDX_ ## id
-
-#define LOCALES(band2, band5, mimo2, mimo5) \
-		{LC_2G(band2), LC_5G(band5), LC(mimo2), LC(mimo5)}
+#define LOCALES(mimo2, mimo5) \
+		{LC(mimo2), LC(mimo5)}
 
 /* macro to get 5 GHz channel group index for tx power */
 #define CHANNEL_POWER_IDX_5G(c) (((c) < 52) ? 0 : \

@@ -97,11 +89,6 @@ static const struct ieee80211_regdomain brcms_regdom_x2 = {
 	}
 };
 
-struct brcms_cm_band {
-	/* struct locale_info flags */
-	u8 locale_flags;
-};
-
  /* locale per-channel tx power limits for MIMO frames
   * maxpwr arrays are index by channel for 2.4 GHz limits, and
   * by sub-band for 5 GHz limits using CHANNEL_POWER_IDX_5G(channel)

@@ -111,13 +98,10 @@ struct locale_mimo_info {
 	s8 maxpwr20[BRCMS_MAXPWR_MIMO_TBL_SIZE];
 	/* tx 40 MHz power limits, qdBm units */
 	s8 maxpwr40[BRCMS_MAXPWR_MIMO_TBL_SIZE];
-	u8 flags;
 };
 
 /* Country names and abbreviations with locale defined from ISO 3166 */
 struct country_info {
-	const u8 locale_2G;	/* 2.4G band locale */
-	const u8 locale_5G;	/* 5G band locale */
 	const u8 locale_mimo_2G;	/* 2.4G mimo info */
 	const u8 locale_mimo_5G;	/* 5G mimo info */
 };

@@ -131,35 +115,6 @@ struct brcms_cm_info {
 	struct brcms_pub *pub;
 	struct brcms_c_info *wlc;
 	const struct brcms_regd *world_regd;
-	/* per-band state (one per phy/radio) */
-	struct brcms_cm_band bandstate[MAXBANDS];
-};
-
-/* locale channel and power info. */
-struct locale_info {
-	u8 flags;
-};
-
-/*
- * Locale Definitions - 2.4 GHz
- */
-static const struct locale_info locale_i = {	/* locale i. channel 1 - 13 */
-	BRCMS_EIRP
-};
-
-/*
- * Locale Definitions - 5 GHz
- */
-static const struct locale_info locale_11 = {
-	BRCMS_EIRP | BRCMS_DFS_EU
-};
-
-static const struct locale_info *g_locale_2g_table[] = {
-	&locale_i
-};
-
-static const struct locale_info *g_locale_5g_table[] = {
-	&locale_11
 };
 
 /*

@@ -172,7 +127,6 @@ static const struct locale_mimo_info locale_bn = {
 	{0, 0, QDB(13), QDB(13), QDB(13),
 	 QDB(13), QDB(13), QDB(13), QDB(13), QDB(13),
 	 QDB(13), 0, 0},
-	0
 };
 
 static const struct locale_mimo_info *g_mimo_2g_table[] = {

@@ -185,7 +139,6 @@ static const struct locale_mimo_info *g_mimo_2g_table[] = {
 static const struct locale_mimo_info locale_11n = {
 	{ /* 12.5 dBm */ 50, 50, 50, QDB(15), QDB(15)},
 	{QDB(14), QDB(15), QDB(15), QDB(15), QDB(15)},
-	0
 };
 
 static const struct locale_mimo_info *g_mimo_5g_table[] = {

@@ -195,27 +148,11 @@ static const struct locale_mimo_info *g_mimo_5g_table[] = {
 static const struct brcms_regd cntry_locales[] = {
 	/* Worldwide RoW 2, must always be at index 0 */
 	{
-		.country = LOCALES(i, 11, bn, 11n),
+		.country = LOCALES(bn, 11n),
 		.regdomain = &brcms_regdom_x2,
 	},
 };
 
-static const struct locale_info *brcms_c_get_locale_2g(u8 locale_idx)
-{
-	if (locale_idx >= ARRAY_SIZE(g_locale_2g_table))
-		return NULL; /* error condition */
-
-	return g_locale_2g_table[locale_idx];
-}
-
-static const struct locale_info *brcms_c_get_locale_5g(u8 locale_idx)
-{
-	if (locale_idx >= ARRAY_SIZE(g_locale_5g_table))
-		return NULL; /* error condition */
-
-	return g_locale_5g_table[locale_idx];
-}
-
 static const struct locale_mimo_info *brcms_c_get_mimo_2g(u8 locale_idx)
 {
 	if (locale_idx >= ARRAY_SIZE(g_mimo_2g_table))

@@ -368,36 +305,6 @@ brcms_c_channel_min_txpower_limits_with_local_constraint(
 
 }
 
-static int
-brcms_c_channels_init(struct brcms_cm_info *wlc_cm,
-		      const struct country_info *country)
-{
-	struct brcms_c_info *wlc = wlc_cm->wlc;
-	uint i;
-	struct brcms_band *band;
-	const struct locale_info *li;
-	const struct locale_mimo_info *li_mimo;
-
-	band = wlc->band;
-	for (i = 0; i < wlc->pub->_nbands;
-	     i++, band = wlc->bandstate[OTHERBANDUNIT(wlc)]) {
-
-		li = (band->bandtype == BRCM_BAND_5G) ?
-		    brcms_c_get_locale_5g(country->locale_5G) :
-		    brcms_c_get_locale_2g(country->locale_2G);
-		wlc_cm->bandstate[band->bandunit].locale_flags = li->flags;
-		li_mimo = (band->bandtype == BRCM_BAND_5G) ?
-		    brcms_c_get_mimo_5g(country->locale_mimo_5G) :
-		    brcms_c_get_mimo_2g(country->locale_mimo_2G);
-
-		/* merge the mimo non-mimo locale flags */
-		wlc_cm->bandstate[band->bandunit].locale_flags |=
-		    li_mimo->flags;
-	}
-
-	return 0;
-}
-
 /*
  * set the driver's current country and regulatory information
  * using a country code as the source. Look up built in country

@@ -407,8 +314,6 @@ static void
 brcms_c_set_country(struct brcms_cm_info *wlc_cm,
 		    const struct brcms_regd *regd)
 {
-	const struct country_info *country = &regd->country;
-	const struct locale_info *locale;
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 
 	if ((wlc->pub->_n_enab & SUPPORT_11N) !=

@@ -417,14 +322,8 @@ brcms_c_set_country(struct brcms_cm_info *wlc_cm,
 
 	brcms_c_stf_ss_update(wlc, wlc->bandstate[BAND_2G_INDEX]);
 	brcms_c_stf_ss_update(wlc, wlc->bandstate[BAND_5G_INDEX]);
-	/* set or restore gmode as required by regulatory */
-	locale = brcms_c_get_locale_2g(country->locale_2G);
-	if (locale && (locale->flags & BRCMS_NO_OFDM))
-		brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
-	else
-		brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
 
-	brcms_c_channels_init(wlc_cm, country);
+	brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
 
 	return;
 }

@@ -477,20 +376,15 @@ void brcms_c_channel_mgr_detach(struct brcms_cm_info *wlc_cm)
 	kfree(wlc_cm);
 }
 
-u8
-brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
-				     uint bandunit)
-{
-	return wlc_cm->bandstate[bandunit].locale_flags;
-}
-
 void
 brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 			 u8 local_constraint_qdbm)
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
+	const struct ieee80211_reg_rule *reg_rule;
 	struct txpwr_limits txpwr;
+	int ret;
 
 	brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);

@@ -498,6 +392,13 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 		wlc_cm, &txpwr, local_constraint_qdbm
 	);
 
+	/* set or restore gmode as required by regulatory */
+	ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, &reg_rule);
+	if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM))
+		brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
+	else
+		brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
+
 	brcms_b_set_chanspec(wlc->hw, chanspec,
 			      !!(ch->flags & IEEE80211_CHAN_PASSIVE_SCAN),
 			      &txpwr);

@@ -515,7 +416,6 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	int delta;
 	const struct country_info *country;
 	struct brcms_band *band;
-	const struct locale_info *li;
 	int conducted_max = BRCMS_TXPWR_MAX;
 	const struct locale_mimo_info *li_mimo;
 	int maxpwr20, maxpwr40;

@@ -531,17 +431,13 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
 
 	chan = CHSPEC_CHANNEL(chanspec);
 	band = wlc->bandstate[chspec_bandunit(chanspec)];
-	li = (band->bandtype == BRCM_BAND_5G) ?
-	    brcms_c_get_locale_5g(country->locale_5G) :
-	    brcms_c_get_locale_2g(country->locale_2G);
-
 	li_mimo = (band->bandtype == BRCM_BAND_5G) ?
 	    brcms_c_get_mimo_5g(country->locale_mimo_5G) :
 	    brcms_c_get_mimo_2g(country->locale_mimo_2G);
 
 	delta = band->antgain;
 
-	if (li == &locale_i)
+	if (band->bandtype == BRCM_BAND_2G)
 		conducted_max = QDB(22);
 
 	maxpwr = QDB(ch->max_power) - delta;

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.h b/drivers/net/wireless/brcm80211/brcmsmac/channel.h
index de9887d..006483a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.h

@@ -37,9 +37,6 @@ brcms_c_channel_mgr_attach(struct brcms_c_info *wlc);
 
 extern void brcms_c_channel_mgr_detach(struct brcms_cm_info *wlc_cm);
 
-extern u8 brcms_c_channel_locale_flags_in_band(struct brcms_cm_info *wlc_cm,
-					   uint bandunit);
-
 extern bool brcms_c_valid_chanspec_db(struct brcms_cm_info *wlc_cm,
 				      u16 chspec);

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 93c865d..8776fbc 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c

@@ -18,6 +18,7 @@
 
 #include <linux/pci_ids.h>
 #include <linux/if_ether.h>
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include <brcm_hw_ids.h>
 #include <aiutils.h>

@@ -5386,11 +5387,6 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config)
 	else
 		return -EINVAL;
 
-	/* Legacy or bust when no OFDM is supported by regulatory */
-	if ((brcms_c_channel_locale_flags_in_band(wlc->cmi, band->bandunit) &
-	     BRCMS_NO_OFDM) && (gmode != GMODE_LEGACY_B))
-		return -EINVAL;
-
 	/* update configuration value */
 	if (config)
 		brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER, gmode);

-- 
1.7.9.5

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help