# Re: \[PATCH\] usb: Add support for u-blox LARA-R6 modules family

- From: Johan Hovold \<johan@kernel.org\>
- Date: 2021-07-01 07:14:31 
- List: linux-usb
- Page: https://ratatoskr.run/linux-usb/2021/07/8878047
- Thread: https://ratatoskr.run/linux-usb/2021/06/8878043/t.md

```text
On Wed, Jun 30, 2021 at 07:09:20PM +0000, Marco De Marco wrote:
> Support for u-blox LARA-R6 modules family, usb serial interface.

Please include the interface layout here too (cf. commit 4205cb01f6e9
("USB: serial: option: adding support for ublox R410M")) and post the
output of usb-devices (or lsusb -v) for this device.

Isn't there an ADB interface that should be reserved as well for
example?

Please also use the common "USB: serial: option:" prefix in your commit
summary (Subject).

> Signed-off-by: Marco De Marco <redacted>
> ---
> 
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index aeaa3756f..05d0379c9 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -238,6 +238,7 @@ static void option_instat_callback(struct urb *urb);
>  #define QUECTEL_PRODUCT_UC15			0x9090
>  /* These u-blox products use Qualcomm's vendor ID */
>  #define UBLOX_PRODUCT_R410M			0x90b2
> +#define UBLOX_PRODUCT_R6XX          0x90fa

Looks like the indentation for the value is off here, or in any case you
should be using tabs rather than spaces.

>  /* These Yuga products use Qualcomm's vendor ID */
>  #define YUGA_PRODUCT_CLM920_NC5			0x9625
>  
> @@ -1101,6 +1102,8 @@ static const struct usb_device_id option_ids[] = {
>  	/* u-blox products using Qualcomm vendor ID */
>  	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
>  	  .driver_info = RSVD(1) | RSVD(3) },
> +	{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
> +	  .driver_info = RSVD(3) },
>  	/* Quectel products using Quectel vendor ID */
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
>  	  .driver_info = NUMEP2 },

Johan
```