[1/1] usb: chipidea: host: fix disconnection detect issue

The commit 4e88d4c08301 ("usb: add a flag to skip PHY
initialization to struct usb_hcd") delete the assignment
for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect)
are not called, the USB PHY driver is not notified of hot plug
event, then the disconnection will not be detected by hardware.

Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization
	to struct usb_hcd")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Mats Karrman <redacted>
Signed-off-by: Peter Chen <redacted>
---
 drivers/usb/chipidea/host.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index af45aa3222b5..4638d9b066be 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c

@@ -124,8 +124,11 @@ static int host_start(struct ci_hdrc *ci)
 
 	hcd->power_budget = ci->platdata->power_budget;
 	hcd->tpl_support = ci->platdata->tpl_support;
-	if (ci->phy || ci->usb_phy)
+	if (ci->phy || ci->usb_phy) {
 		hcd->skip_phy_initialization = 1;
+		if (ci->usb_phy)
+			hcd->usb_phy = ci->usb_phy;
+	}
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;