# \[PATCH 4/6\] Documentation/rv: Document the enable and reactor states

- From: Wei Li \<hidden\>
- Date: 2026-11-04 09:21:57 
- List: linux-trace-kernel
- Page: https://ratatoskr.run/linux-trace-kernel/2026/11/17859387
- Thread: https://ratatoskr.run/linux-trace-kernel/2026/11/17859384/t.md

```text
From: Wei Li <redacted>

The "X" value of the enable file and the "*" marker of the reactors file
are undocumented. Document both in the monitors section.

Signed-off-by: Wei Li <redacted>
---
 Documentation/trace/rv/runtime-verification.rst | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
index c700dde9259c..0d9edb687836 100644
--- a/Documentation/trace/rv/runtime-verification.rst
+++ b/Documentation/trace/rv/runtime-verification.rst
@@ -210,12 +210,16 @@ For example::
 
 - Writing "0" disables the *MONITOR*
 - Writing "1" enables the *MONITOR*
-- Reading return the current status of the *MONITOR*
+- Reading returns "0" if the *MONITOR* is disabled, and "1" if it is
+  enabled. For a container, "X" is returned when only some of its
+  nested monitors are enabled.
 
 **monitors/MONITOR/reactors**
 
 - List available reactors, with the select reaction for the given *MONITOR*
   inside "[]". The default one is the nop (no operation) reactor.
+- A "*" after the selected reactor of a container indicates that some
+  nested monitors use a different reactor.
 - Writing the name of a reactor enables it to the given MONITOR.
 
 For example::
-- 
2.55.0

```
