# Re: \[PATCH v5 4/7\] arm64: probes: Add GCS support to bl/blr/ret

- From: Catalin Marinas \<catalin.marinas@arm.com\>
- Date: 2025-08-15 14:08:46 
- List: linux-trace-kernel
- Page: https://ratatoskr.run/linux-trace-kernel/2025/08/3172278
- Thread: https://ratatoskr.run/linux-trace-kernel/2025/08/3164654/t.md

```text
On Mon, Aug 11, 2025 at 09:10:07AM -0500, Jeremy Linton wrote:
> The arm64 probe simulation doesn't currently have logic in place
> to deal with GCS and this results in core dumps if probes are inserted
> at control flow locations. Fix-up bl, blr and ret to manipulate the
> shadow stack as needed.
> 
> While we manipulate and validate the shadow stack correctly, the
> hardware provides additional security by only allowing GCS operations
> against pages which are marked to support GCS. For writing there is
> gcssttr() which enforces this, but there isn't an equivalent for
> reading. This means that uprobe users should be aware that probing on
> control flow instructions which require reading the shadow stack (ex:
> ret) offers lower security guarantees than what is achieved without
> the uprobe active.
> 
> Signed-off-by: Jeremy Linton <redacted>

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
```
