[PATCH v3] Kconfig: fix typos in core makefiles/code and purge remaining ghosts (v3)
From: Breno Rodrigues Alves <hidden>
Date: 2026-09-05 00:07:03
Also in:
linux-clk, linux-fbdev, linux-input, linux-media, linux-pci, linux-sound, linux-staging, linux-usb, lkml
Subsystem:
documentation, parallel lcd/keypad panel driver, the rest · Maintainers:
Jonathan Corbet, Willy Tarreau, Ksenija Stanojevic, Linus Torvalds
Analysis from Sashiko AI revealed that several legacy options were not
true dead weight, but rather victims of pre-existing copy-paste typos
in Makefiles and C code.
This patch:
- Fixes MediaTek interconnect typo mapping mt8196.o to MT8195.
- Fixes MediaTek regulator typo mapping mt6316-regulator to MT6315.
- Fixes missing CONFIG_ prefix on DVB_ULE_DEBUG macro in dvb_net.c.
- Retains critical PCI_IMX6_EP and Tegra audio prompts to keep hidden
symbols selectable.
- Cleans up the dangling comment in drivers/leds/Kconfig.
- Purges the remaining verified ghost weight.
Signed-off-by: Breno Rodrigues Alves <redacted>
---
Documentation/admin-guide/index.rst | 1 -
Documentation/admin-guide/lcd-panel-cgram.rst | 27 -------------------
2 files changed, 28 deletions(-)
delete mode 100644 Documentation/admin-guide/lcd-panel-cgram.rst
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index cd28dfe91..70c0bbc87 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst@@ -152,7 +152,6 @@ How to configure your hardware within your Linux system. gpio/index hw_random laptops/index - lcd-panel-cgram media/index nvme-multipath parport
diff --git a/Documentation/admin-guide/lcd-panel-cgram.rst b/Documentation/admin-guide/lcd-panel-cgram.rst
deleted file mode 100644
index a3eb00c62..000000000
--- a/Documentation/admin-guide/lcd-panel-cgram.rst
+++ /dev/null@@ -1,27 +0,0 @@ -====================================== -Parallel port LCD/Keypad Panel support -====================================== - -Some LCDs allow you to define up to 8 characters, mapped to ASCII -characters 0 to 7. The escape code to define a new character is -'\e[LG' followed by one digit from 0 to 7, representing the character -number, and up to 8 couples of hex digits terminated by a semi-colon -(';'). Each couple of digits represents a line, with 1-bits for each -illuminated pixel with LSB on the right. Lines are numbered from the -top of the character to the bottom. On a 5x7 matrix, only the 5 lower -bits of the 7 first bytes are used for each character. If the string -is incomplete, only complete lines will be redefined. Here are some -examples:: - - printf "\e[LG0010101050D1F0C04;" => 0 = [enter] - printf "\e[LG1040E1F0000000000;" => 1 = [up] - printf "\e[LG2000000001F0E0400;" => 2 = [down] - printf "\e[LG3040E1F001F0E0400;" => 3 = [up-down] - printf "\e[LG40002060E1E0E0602;" => 4 = [left] - printf "\e[LG500080C0E0F0E0C08;" => 5 = [right] - printf "\e[LG60016051516141400;" => 6 = "IP" - - printf "\e[LG00103071F1F070301;" => big speaker - printf "\e[LG00002061E1E060200;" => small speaker - -Willy
--
2.43.0