Reviews by schmitzmic@gmail.com · linux-scsi

All review-attestation trailers (Reviewed-by / Acked-by / Tested-by / Reported-by / Suggested-by / Co-developed-by / Reported-and-tested-by) by this address on the linux-scsi archive.

100 attestations · capped at 100 most-recent. (2 Acked-by, 5 Reported-and-tested-by, 20 Reviewed-by, 3 Suggested-by, 70 Tested-by)

• STALE657d REVIEWED: 1 (1M) Re: [PATCH] scsi: wd33c93: Don't use stale scsi_pointer value
  2024-10-03 · Reviewed-by
• STALE1721d LANDED: 5 (5M) [PATCH v5 10/14] ataflop: remove ataflop_probe_lock mutex
  2021-11-03 · Tested-by
• STALE1722d REVIEWED: 5 (5M) [PATCH v3 11/13] ataflop: remove ataflop_probe_lock mutex
  2021-11-03 · Tested-by
• STALE1722d REVIEWED: 5 (5M) [PATCH v2 11/13] ataflop: remove ataflop_probe_lock mutex
  2021-11-03 · Tested-by
• DORMANTno replies REVIEWED: 1 (1M) Re: [PATCH v3 0/3] last batch of add_disk() error handling conversions
  2021-10-24 · Tested-by
• STALE1733d REVIEWED: 5 (5M) [PATCH v3 1/3] ataflop: remove ataflop_probe_lock mutex
  2021-10-21 · Tested-by
• STALE2038d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.19 39/87] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Tested-by
• STALE2038d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.19 39/87] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Reviewed-by
• STALE2037d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.14 33/66] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Tested-by
• STALE2037d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.14 33/66] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Reviewed-by
• STALE2038d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.9 24/48] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Tested-by
• STALE2038d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.9 24/48] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Reviewed-by
• STALE2023d REVIEWED: 2 (2M) [PATCH AUTOSEL 5.4 059/130] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Tested-by
• STALE2023d REVIEWED: 2 (2M) [PATCH AUTOSEL 5.4 059/130] scsi: atari_scsi: Fix race condition between .queuecommand and EH
  2020-12-23 · Reviewed-by
• STALE2051d REVIEWED: 1 (1M) Re: [PATCH] scsi/NCR5380: Remove in_interrupt() test
  2020-12-01 · Tested-by
• STALE2059d REVIEWED: 2 (2M) Re: [PATCH] scsi/atari_scsi: Fix race condition between .queuecommand and EH
  2020-11-20 · Reviewed-by
• STALE2059d REVIEWED: 2 (2M) Re: [PATCH] scsi/atari_scsi: Fix race condition between .queuecommand and EH
  2020-11-20 · Tested-by
• STALE2059d REVIEWED: 2 (2M) Re: [PATCH] scsi/NCR5380: Reduce NCR5380_maybe_release_dma_irq() call sites
  2020-11-20 · Reviewed-by
• STALE2059d REVIEWED: 2 (2M) Re: [PATCH] scsi/NCR5380: Reduce NCR5380_maybe_release_dma_irq() call sites
  2020-11-20 · Tested-by
• STALE2412d REVIEWED: 1 (1M) [PATCH AUTOSEL 5.4 072/134] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reported-and-tested-by
• STALE2412d REVIEWED: 1 (1M) [PATCH AUTOSEL 5.4 072/134] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reviewed-by
• STALE2415d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 44/79] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reported-and-tested-by
• STALE2415d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 44/79] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reviewed-by
• STALE2415d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 26/42] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reported-and-tested-by
• STALE2415d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 26/42] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reviewed-by
• STALE2415d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 30/58] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reported-and-tested-by
• STALE2415d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 30/58] scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-12-11 · Reviewed-by
• STALE2431d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.19 065/237] scsi: zorro_esp: Limit DMA transfers to 65535 bytes
  2019-11-16 · Tested-by
• STALE2431d REVIEWED: 2 (2M) [PATCH AUTOSEL 4.19 065/237] scsi: zorro_esp: Limit DMA transfers to 65535 bytes
  2019-11-16 · Reviewed-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 171/191] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 172/191] scsi: NCR5380: Check for invalid reselection target
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 174/191] scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 173/191] scsi: NCR5380: Don't clear busy flag when abort fails
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 169/191] scsi: NCR5380: Have NCR5380_select() return a bool
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 170/191] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  2019-11-10 · Suggested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 170/191] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 175/191] scsi: NCR5380: Handle BUS FREE during reselection
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 094/109] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 099/109] scsi: NCR5380: Check for bus reset
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 092/109] scsi: NCR5380: Have NCR5380_select() return a bool
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 097/109] scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 098/109] scsi: NCR5380: Handle BUS FREE during reselection
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 095/109] scsi: NCR5380: Check for invalid reselection target
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 093/109] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  2019-11-10 · Suggested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 093/109] scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.14 096/109] scsi: NCR5380: Don't clear busy flag when abort fails
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 56/66] scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 59/66] scsi: NCR5380: Don't call dsprintk() following reselection interrupt
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 60/66] scsi: NCR5380: Handle BUS FREE during reselection
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 57/66] scsi: NCR5380: Check for invalid reselection target
  2019-11-10 · Tested-by
• STALE2447d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.9 58/66] scsi: NCR5380: Don't clear busy flag when abort fails
  2019-11-10 · Tested-by
• STALE2446d REVIEWED: 1 (1M) [PATCH AUTOSEL 4.19 176/191] scsi: NCR5380: Check for bus reset
  2019-11-10 · Tested-by
• STALE2451d LANDED: 1 (1M) [PATCH 1/2] atari_scsi, sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-11-02 · Reported-and-tested-by
• STALE2451d LANDED: 1 (1M) [PATCH 1/2] atari_scsi, sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE
  2019-11-02 · Reviewed-by
• STALE2583d REVIEWED: 9 (9M) [PATCH V5 16/16] NCR5380: Support chained sg lists
  2019-06-18 · Reviewed-by
• STALE2592d REVIEWED: 1 (1M) [PATCH V4 16/16] NCR5380: Support chained sg lists
  2019-06-17 · Reviewed-by
• STALE2593d REVIEWED: 1 (1M) [PATCH V3 15/15] NCR5380: Support chained sg lists
  2019-06-14 · Reviewed-by
• DORMANTno replies REVIEWED: 1 (1M) Re: [PATCH] NCR5380: Support chained sg lists
  2019-06-11 · Reviewed-by
• STALE2738d REVIEWED: 1 (1M) [PATCH v9 01/22] scsi/atari_scsi: Don't select CONFIG_NVRAM
  2019-01-15 · Acked-by
• STALE2752d REVIEWED: 1 (1M) Re: [PATCH v8 01/25] scsi/atari_scsi: Don't select CONFIG_NVRAM
  2018-12-29 · Acked-by
• DORMANTno replies REVIEWED: 2 (1M) [PATCH v3 2/6] esp_scsi: Track residual for PIO transfers
  2018-10-16 · Tested-by
• STALE2836d REVIEWED: 2 (2M) [PATCH v3 1/6] zorro_esp: Limit DMA transfers to 65535 bytes
  2018-10-16 · Tested-by
• STALE2836d REVIEWED: 2 (2M) [PATCH v3 1/6] zorro_esp: Limit DMA transfers to 65535 bytes
  2018-10-16 · Reviewed-by
• STALE2836d REVIEWED: 2 (1M) [PATCH v3 3/6] esp_scsi: Grant disconnect privilege for untagged commands
  2018-10-16 · Tested-by
• STALE2836d REVIEWED: 2 (1M) [PATCH v3 5/6] esp_scsi: De-duplicate PIO routines
  2018-10-16 · Tested-by
• STALE2836d REVIEWED: 2 (1M) [PATCH v3 4/6] esp_scsi: Eliminate ESP_FLAG_DOING_SLOWCMD
  2018-10-16 · Tested-by
• STALE2836d REVIEWED: 2 (1M) [PATCH v3 6/6] esp_scsi: Optimize PIO loops
  2018-10-16 · Tested-by
• STALE2835d REVIEWED: 1 (1M) Re: [PATCH v2 1/6] zorro_esp: Limit DMA transfers to 65535 bytes
  2018-10-14 · Reviewed-by
• STALE2835d REVIEWED: 2 (1M) [PATCH v2 4/6] esp_scsi: Eliminate ESP_FLAG_DOING_SLOWCMD
  2018-10-14 · Tested-by
• STALE2835d REVIEWED: 2 (1M) [PATCH v2 6/6] esp_scsi: Optimize PIO loops
  2018-10-14 · Tested-by
• STALE2835d REVIEWED: 2 (1M) [PATCH v2 3/6] esp_scsi: Grant disconnect privilege for untagged commands
  2018-10-14 · Tested-by
• STALE2835d REVIEWED: 2 (1M) [PATCH v2 5/6] esp_scsi: De-duplicate PIO routines
  2018-10-14 · Tested-by
• STALE2835d REVIEWED: 2 (1M) [PATCH v2 2/6] esp_scsi: Track residual for PIO transfers
  2018-10-14 · Tested-by
• STALE2835d REVIEWED: 1 (1M) [PATCH v2 1/6] zorro_esp: Limit DMA transfers to 65535 bytes
  2018-10-14 · Tested-by
• STALE2837d REVIEWED: 1 (1M) Re: [PATCH 0/6] mac_esp, zorro_esp, esp_scsi: Various improvements
  2018-10-14 · Tested-by
• DORMANTno replies REVIEWED: 1 (1M) [PATCH 04/10] NCR5380: Withhold disconnect privilege for REQUEST SENSE
  2018-09-27 · Suggested-by
• DORMANTno replies REVIEWED: 1 (1M) [PATCH 04/10] NCR5380: Withhold disconnect privilege for REQUEST SENSE
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 03/10] NCR5380: Have NCR5380_select() return a bool
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 05/10] NCR5380: Use DRIVER_SENSE to indicate valid sense data
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 09/10] NCR5380: Handle BUS FREE during reselection
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 08/10] NCR5380: Don't call dsprintk() following reselection interrupt
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 07/10] NCR5380: Don't clear busy flag when abort fails
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 06/10] NCR5380: Check for invalid reselection target
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 10/10] NCR5380: Check for bus reset
  2018-09-27 · Tested-by
• STALE2856d REVIEWED: 1 (1M) [PATCH 02/10] NCR5380: Reduce goto statements in NCR5380_select()
  2018-09-27 · Tested-by
• DORMANTno replies REVIEWED: 1 (1M) Re: [PATCH] scsi/mac_esp: Replace bogus memory barrier with spinlock
  2017-04-25 · Reviewed-by
• STALE3440d REVIEWED: 1 (1M) Re: [PATCH 0/6] ncr5380: Miscellaneous minor patches
  2017-01-30 · Tested-by
• STALE3572d REVIEWED: 4 (4M) [PATCH v3 03/12] scsi/atari_scsi: Make device register accessors re-entrant
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 06/12] scsi/ncr5380: Improve hostdata struct member alignment and cache-ability
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 05/12] scsi/ncr5380: Increase register polling limit
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 10/12] scsi/ncr5380: Expedite register polling
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 07/12] scsi/ncr5380: Store IO ports and addresses in host private data
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 09/12] scsi/ncr5380: Pass hostdata pointer to register polling routines
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 12/12] scsi/ncr5380: Suppress unhelpful "interrupt without IRQ bit" message
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 11/12] scsi/ncr5380: Use correct types for DMA routines
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 08/12] scsi/ncr5380: Use correct types for device register accessors
  2016-10-10 · Tested-by
• STALE3572d REVIEWED: 5 (4M) [PATCH v3 04/12] scsi/ncr5380: Simplify register polling limit
  2016-10-10 · Tested-by
• DORMANTno replies REVIEWED: 1 (1M) Re: [PATCH v2 00/12] Fixes, cleanup and g_NCR5380_mmio/g_NCR5380 merger
  2016-10-09 · Tested-by
• STALE3716d REVIEWED: 5 (4M) [PATCH v4 03/23] ncr5380: Remove REAL_DMA and REAL_DMA_POLL macros
  2016-03-23 · Tested-by
• STALE3716d REVIEWED: 5 (4M) [PATCH v4 05/23] ncr5380: Disable the DMA errata workaround flag by default
  2016-03-23 · Tested-by