In order to support the Qualcomm MDM9615 in the Sierra Wireless WP8548
Modules, add the PM8018 PMIC support into MFD, Regulator, RTC and input.

This patchset is part of a global SoC + Module + Board support for the
Sierra Wireless mangOH Board support with the WP8548 module.

Patch "mfd: qcom-rpm: Add support for pm8018 RPM Regulator" depends on :
 - "fix offset error for msm8660" at http://lkml.kernel.org/r/1465897725-16213-1-git-send-email-linus.walleij@linaro.org
 - "parametrize also ack selector size" at http://lkml.kernel.org/r/1466576837-21995-1-git-send-email-linus.walleij@linaro.org

Changes since v2 at http://lkml.kernel.org/r/1466759887-25394-1-git-send-email-narmstrong@baylibre.com :
 - Dropped pwrkey changes

Changes since v1 at http://lkml.kernel.org/r/1466158929-19524-1-git-send-email-narmstrong@baylibre.com :
 - Rebase mfd/qcom_rpm.c on top of Linus "fix offset error for msm8660" and "parametrize also ack selector size" patches
 - Rename QCOM_RPM_NCP in to QCOM_RPM_PM8018_NCP
 - Rebased qcom-rpm.h PM8018 defines numbers without a gap
 - Dropped regulator corner

Neil Armstrong (4):
  mfd: pm8921: Add support for pm8018
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  mfd: qcom-rpm: Add support for pm8018 RPM Regulator
  regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator

 .../devicetree/bindings/mfd/qcom-pm8xxx.txt        |   1 +
 Documentation/devicetree/bindings/mfd/qcom-rpm.txt |  15 ++++
 drivers/mfd/pm8921-core.c                          |   1 +
 drivers/mfd/qcom_rpm.c                             |  51 +++++++++++
 drivers/regulator/qcom_rpm-regulator.c             | 100 +++++++++++++++++++++
 drivers/rtc/rtc-pm8xxx.c                           |  11 +++
 include/dt-bindings/mfd/qcom-rpm.h                 |  22 +++++
 7 files changed, 201 insertions(+)

-- 
1.9.1

-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.