[PATCH] IB/qib: Set default LE2 value for active cables to 0
From: Mike Marciniszyn <hidden>
Date: 2011-02-28 13:39:49
Subsystem:
infiniband subsystem, the rest · Maintainers:
Jason Gunthorpe, Leon Romanovsky, Linus Torvalds
From: Mitko Haralanov <redacted> For active and far-EQ cables use an LE2 value of 0 for improved SI. Signed-off-by: Mitko Haralanov <redacted> Signed-off-by: Mike Marciniszyn <redacted> --- drivers/infiniband/hw/qib/qib_iba7322.c | 13 ++++++++++--- drivers/infiniband/hw/qib/qib_qsfp.h | 2 ++ 2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index d51124a..8f0e506 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c@@ -5582,9 +5582,16 @@ static void qsfp_7322_event(struct work_struct *work) * even on failure to read cable information. We don't * get here for QME, so IS_QME check not needed here. */ - le2 = (!ret && qd->cache.atten[1] >= qib_long_atten && - !ppd->dd->cspec->r1 && QSFP_IS_CU(qd->cache.tech)) ? - LE2_5m : LE2_DEFAULT; + if (!ret && !ppd->dd->cspec->r1) { + if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) + le2 = LE2_QME; + else if (qd->cache.atten[1] >= qib_long_atten && + QSFP_IS_CU(qd->cache.tech)) + le2 = LE2_5m; + else + le2 = LE2_DEFAULT; + } else + le2 = LE2_DEFAULT; ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); init_txdds_table(ppd, 0); }
diff --git a/drivers/infiniband/hw/qib/qib_qsfp.h b/drivers/infiniband/hw/qib/qib_qsfp.h
index 19b527b..c109bbd 100644
--- a/drivers/infiniband/hw/qib/qib_qsfp.h
+++ b/drivers/infiniband/hw/qib/qib_qsfp.h@@ -79,6 +79,8 @@ extern const char *const qib_qsfp_devtech[16]; /* Active Equalization includes fiber, copper full EQ, and copper near Eq */ #define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1) +/* Active Equalization includes fiber, copper full EQ, and copper far Eq */ +#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1) /* Attenuation should be valid for copper other than full/near Eq */ #define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1) /* Length is only valid if technology is "copper" */ --
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html