# Re: rework check\_disk\_change()

- From: Hannes Reinecke \<hare@suse.de\>
- Date: 2020-09-04 09:23:20 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2020/09/187969
- Thread: https://ratatoskr.run/linux-block/2020/09/187819/t.md

```text
On 9/2/20 5:38 PM, Douglas Gilbert wrote:
> On 2020-09-02 10:11 a.m., Christoph Hellwig wrote:
>> Hi Jens,
>>
>> this series replaced the not very nice check_disk_change() function with
>> a new bdev_media_changed that avoids having the ->revalidate_disk call
>> at its end.  As a result ->revalidate_disk can be removed from a lot of
>> drivers.
>>
>
> For over 20 years the sg driver has been carrying this snippet that hangs
> off the completion callback:
>
>         if (driver_stat & DRIVER_SENSE) {
>                  struct scsi_sense_hdr ssh;
>
>                  if (scsi_normalize_sense(sbp, sense_len, &ssh)) {
>                          if (!scsi_sense_is_deferred(&ssh)) {
>                                  if (ssh.sense_key == UNIT_ATTENTION) {
>                                          if (sdp->device->removable)
>                                                  sdp->device->changed = 1;
>                                  }
>                          }
>                  }
>          }
>
> Is it needed? The unit attention (UA) may not be associated with the
> device changing. Shouldn't the SCSI mid-level monitor UAs if they
> impact the state of a scsi_device object?
>
We do; check scsi_io_completion_action() in drivers/scsi/scsi_lib.c
So I don't think you'd need to keep it in sg.c.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                Kernel Storage Architect
hare@suse.de                              +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Felix Imendörffer
```