# Re: \[PATCH V10 10/19\] block: loop: pass multi-page bvec to iov\_iter

- From: Ming Lei \<hidden\>
- Date: 2018-11-19 08:25:49 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2018/11/145837
- Thread: https://ratatoskr.run/linux-block/2018/11/146358/t/2.md

```text
On Thu, Nov 15, 2018 at 04:40:22PM -0800, Omar Sandoval wrote:
> On Thu, Nov 15, 2018 at 04:52:57PM +0800, Ming Lei wrote:
> > iov_iter is implemented with bvec itererator, so it is safe to pass
> > multipage bvec to it, and this way is much more efficient than
> > passing one page in each bvec.
> > 
> > Cc: Dave Chinner <redacted>
> > Cc: Kent Overstreet <redacted>
> > Cc: Mike Snitzer <redacted>
> > Cc: <redacted>
> > Cc: Alexander Viro <viro@zeniv.linux.org.uk>
> > Cc: <redacted>
> > Cc: Shaohua Li <shli@kernel.org>
> > Cc: <redacted>
> > Cc: <redacted>
> > Cc: David Sterba <dsterba@suse.com>
> > Cc: <redacted>
> > Cc: Darrick J. Wong <redacted>
> > Cc: <redacted>
> > Cc: Gao Xiang <redacted>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Cc: Theodore Ts'o <tytso@mit.edu>
> > Cc: <redacted>
> > Cc: Coly Li <redacted>
> > Cc: <redacted>
> > Cc: Boaz Harrosh <redacted>
> > Cc: Bob Peterson <redacted>
> > Cc: <redacted>
> 
> Reviewed-by: Omar Sandoval <redacted>
> 
> Comments below.
> 
> > Signed-off-by: Ming Lei <redacted>
> > ---
> >  drivers/block/loop.c | 23 ++++++++++++-----------
> >  1 file changed, 12 insertions(+), 11 deletions(-)
> > 
> > diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> > index bf6bc35aaf88..a3fd418ec637 100644
> > --- a/drivers/block/loop.c
> > +++ b/drivers/block/loop.c
> > @@ -515,16 +515,16 @@ static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
> >  	struct bio *bio = rq->bio;
> >  	struct file *file = lo->lo_backing_file;
> >  	unsigned int offset;
> > -	int segments = 0;
> > +	int nr_bvec = 0;
> >  	int ret;
> >  
> >  	if (rq->bio != rq->biotail) {
> > -		struct req_iterator iter;
> > +		struct bvec_iter iter;
> >  		struct bio_vec tmp;
> >  
> >  		__rq_for_each_bio(bio, rq)
> > -			segments += bio_segments(bio);
> > -		bvec = kmalloc_array(segments, sizeof(struct bio_vec),
> > +			nr_bvec += bio_bvecs(bio);
> > +		bvec = kmalloc_array(nr_bvec, sizeof(struct bio_vec),
> >  				     GFP_NOIO);
> >  		if (!bvec)
> >  			return -EIO;
> > @@ -533,13 +533,14 @@ static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
> >  		/*
> >  		 * The bios of the request may be started from the middle of
> >  		 * the 'bvec' because of bio splitting, so we can't directly
> > -		 * copy bio->bi_iov_vec to new bvec. The rq_for_each_segment
> > +		 * copy bio->bi_iov_vec to new bvec. The bio_for_each_bvec
> >  		 * API will take care of all details for us.
> >  		 */
> > -		rq_for_each_segment(tmp, rq, iter) {
> > -			*bvec = tmp;
> > -			bvec++;
> > -		}
> > +		__rq_for_each_bio(bio, rq)
> > +			bio_for_each_bvec(tmp, bio, iter) {
> > +				*bvec = tmp;
> > +				bvec++;
> > +			}
> 
> Even if they're not strictly necessary, could you please include the
> curly braces for __rq_for_each_bio() here?

Sure, will do it.

> 
> >  		bvec = cmd->bvec;
> >  		offset = 0;
> >  	} else {
> > @@ -550,11 +551,11 @@ static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd,
> >  		 */
> >  		offset = bio->bi_iter.bi_bvec_done;
> >  		bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter);
> > -		segments = bio_segments(bio);
> > +		nr_bvec = bio_bvecs(bio);
> 
> This scared me for a second, but it's fine to do here because we haven't
> actually enabled multipage bvecs yet, right?

Well, it is fine, all helpers supporting multi-page bvec actually works
well when it isn't enabled, cause single-page bvec is one special case in
which multi-page bevc helpers have to deal with.

Thanks,
Ming
```
