# Re: Enable the skip\_copy feature will results in data integrity issue in raid5 degraded mode.

- From: Shaohua Li \<shli@kernel.org\>
- Date: 2017-02-15 00:36:23 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2017/02/6634328
- Thread: https://ratatoskr.run/linux-raid/2017/02/6634310/t.md

```text
On Tue, Feb 14, 2017 at 11:48:51AM -0800, Shaohua Li wrote:
> On Mon, Feb 13, 2017 at 05:07:45PM +0800, Chien Lee wrote:
> > Hello,
> > 
> > 
> > Recently we find a bug about skip_copy feature in raid5 degraded mode.
> > In the beginning, we enable the skip_copy feature to speed up system’s
> > write performance. But when the system has database read/write I/O
> > continually in raid5 degraded mode, the Mongo DB will detect the
> > checksum error and generate related debug log. The following is the
> > testing detail.
> > 
> > 
> > a. Enable skip_copy
> >     --> Checksum error logs from Mongo DB
> > 
> > 2017-02-06T11:54:56.537+0800 E STORAGE  [conn7] WiredTiger (0)
> > [1486353296:537114][52:0x7f98396a4700],
> > file:collection-110-3235234017846331078.wt,  WT_CURSOR.next: read
> > checksum error for 4096B block at offset 61440: calculated block
> > checksum of 1363526237 doesn't match expected checksum of 2969711960
> > 
> > 
> > b. Disable skip_copy
> >     --> Mongo DB has no checksum error.
> > 
> > 
> > We've pretty sure that it must be a bug by our repeated database I/O
> > testing. When skip_copy feature is enabled, the raid5/raid6 always
> > causes the mongo DB checksum error in degraded mode less than one
> > hour. On the contrary, it will never cause this abnormal situation
> > when the skip_copy feature is disabled. Besides, because the skip_copy
> > feature only affects the write action instead of read action, I think
> > it should be the write action in degraded mode while skip_copy feature
> > is enabled cause this bug.
> > 
> > 
> > Please kindly provide us some help or idea about the root cause and solution.
> 
> Thanks for the reporting, I'll look at it. In the meaning time, do you have a
> quick way which I can use to reproduce the issue?

Can't find anything suspicious after checking a while. Can you describe the
setup/test in detail? like if there is sync running, IO error?
```