# Check not actually reading drives

- From: Larkin Lowrey \<hidden\>
- Date: 2012-03-28 23:19:11 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2012/03/6619408
- Thread: https://ratatoskr.run/linux-raid/2012/03/6619408/t.md

```text
I just loaded 3.3.0-4.fc16.x86_64 and started a check by running...

echo check > /sys/block/md1/md/sync_action

I'm getting the following from mdstat:

md1 : active raid5 sdl2[8] sde2[1] sdf2[4] sda2[9] sdb2[10] sdc2[3]
sdd2[0] sdk2[6]
      2180641792 blocks super 1.2 level 5, 64k chunk, algorithm 2 [8/8]
[UUUUUUUU]
      [==>..................]  check = 14.9% (46442632/311520256)
finish=21.9min speed=201328K/sec

I can tell you for certain that these drives are not able to do 200MB/s.
Further, iostat shows no disk activity (other than normal usage).

mdadm - v3.2.3 - 23rd December 2011

Do I just need to wait for a new kernel from Fedora?

--Larkin
```
