# RE: Bootable Raid-1

- From: Leslie Rhorer \<hidden\>
- Date: 2011-09-10 17:56:00 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2011/09/6617268
- Thread: https://ratatoskr.run/linux-raid/2011/09/6617268/t.md

```text


> -----Original Message-----
> From: CoolCold [mailto:<redacted>]
> Sent: Thursday, September 08, 2011 3:29 PM
> To: <redacted>
> Cc: Roberto Spadim; <redacted>; <redacted>; linux-
> raid@vger.kernel.org
> Subject: Re: Bootable Raid-1
> 
> On Wed, Feb 2, 2011 at 9:44 PM, Leslie Rhorer [ref] wrote:
> <snip>
> >>
> >> grub2 work with raid1 boot partition and rootfs over mdadm raid1
> >> i tested today (03:00 AM) on my ubuntu desktop
> >
> >        There wasn't really any question about that.  I've been running
> > RAID1 boots under GRUB2 for months.  Prior to that, it was RAID1 under
> GRUB
> > legacy.  RAID1 under GRUB legacy takes some finagling.  Under GRUB2 it
> > should be straightforward as long as the partitioning is correct and one
> > employs a 0.90 superblock for the /boot array.
> >
> Guys, basing on your experience, can you tell us, how does Grub2 react
> on degraded raid? Does it respect md's point of view which disk is bad
> and which is not? Does it cooperate well with mdadm in general?

	I can't say from experience.  Presumably it will.

> Grub legacy was way easy, just setup on disk & read that disk, no raid
> knowledge, no problems. I guess grub2 can be configured in that manner
> too, but as it has raid/lvm/whatever support, may be give it a try...
> 
> I've got Debian Squeeze servers with grub2, without any mirroing, so
> converting them into RAID1 system, wanna make it right.

	That conversion shouldn't be difficult.  Going from legacy GRUB
RAID1 to GRUB2 RAID1 was a bit of a challenge.

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
```
