# Re: Prevent automatic reconstruction during boot/assembly (RAID 1)?

- From: Neil Brown \<hidden\>
- Date: 2009-08-12 23:10:09 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2009/08/6607005
- Thread: https://ratatoskr.run/linux-raid/2009/08/6607005/t.md

```text
On Tuesday August 11, faerber@gmail.com wrote:
> Hi,
> 
> i'm trying to figure out if it is possible to prevent the
> automatic reconstruction that can occur during the md assembly
> at boot.
> I'm running Kernel 2.6.30.4 and use a RAID-1 over two SATA disks.
> If the server is rebooted "hard" due to power loss etc. it often happens
> that the reconstruction of my RAID-1 is automatically triggered by the kernel.
> Is there any way to prevent this? I want to re-add the "out of sync"
> drive myself
> using mdadm only.
> I'm currently using raid auto detection (partiton type fd) and the old
> 0.90 superblock format but if it helps i would switch
> to an initrd/newer superblock.

There isn't any simple way to do what you want.
May if you could explain why you want it, something else might be
suitable.

NeilBrown
```
