# Re: partitioned raid 5 and proper partition alignment

- From: Goswin von Brederlow \<hidden\>
- Date: 2009-08-08 22:21:35 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2009/08/6606980
- Thread: https://ratatoskr.run/linux-raid/2009/08/6606980/t.md

```text
Matthias Dahl [ref] writes:

> Hi.
>
> On Saturday 08 August 2009 09:56:59 you wrote:
>
>> But each stripe only holds 128k of data. You have to align to that.
>
> I beg to differ. There are two data chunks and one parity chunk, thus a whole 
> stripe is 192k long if you've a 64k chunk size. If you align to 128k and you 
> put e.g. ext4 on it with the correct fs stride and stripe-width settings, 
> you'll probably end up with worse performance since you start in the middle of 
> a stripe even though properly aligned to a chunk boundary. Or am I totally on 
> the wrong track here...?!

Yes you are. The filesystem will never ever see the parity block of a
stripe. It only ever sees the 128k data. Writing 128k data will write
a full stripe of 192k to disk.

MfG
        Goswin
```
