# Re: partitioned raid 5 and proper partition alignment

- From: Matthias Dahl \<hidden\>
- Date: 2009-08-08 11:09:59 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2009/08/6606974
- Thread: https://ratatoskr.run/linux-raid/2009/08/6606972/t.md

```text
Hi.

On Saturday 08 August 2009 09:56:59 you wrote:

> But each stripe only holds 128k of data. You have to align to that.

I beg to differ. There are two data chunks and one parity chunk, thus a whole 
stripe is 192k long if you've a 64k chunk size. If you align to 128k and you 
put e.g. ext4 on it with the correct fs stride and stripe-width settings, 
you'll probably end up with worse performance since you start in the middle of 
a stripe even though properly aligned to a chunk boundary. Or am I totally on 
the wrong track here...?!

> No, nothing special about sector 0. 

So sector 0 gets striped like all the others meaning that it counts to the 
first 192k stripe? So in order to get everything properly stripe aligned it 
was correct to leave a 196.096 byte span free after sector 0.

Best regards,
matthias.
```
