Dear,
I have a system with the following raid setup:
root@astra:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md_d0p1 3906116 3712624 193492 96% /
/dev/md_d0p3 976476 32848 943628 4% /tmp
/dev/md_d0p5 488236 55208 433028 12% /var/log
/dev/md_d0p6 3906116 3630292 275824 93% /usr/src
/dev/md_d0p7 7666192 42128 7624064 1% /home
root@astra:~# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5]
[raid4]
md_d0 : active raid1 sdb1[1] sda1[0]
17920384 blocks [2/2] [UU]
The unit boots over ethernet, with the following stansa in pxeconfig:
default astra-2.6.27.6 noinitrd load_ramdisk=0 prompt_ramdisk=0
root=/dev/md_d0p1 raid=part ro
prompt 1
timeout 1200
display astra.f1
F1 astra.f1
So far, so good.
Now as soon as i switch to kernel 2.6.28.2, it fails and the kernel is
not able to find the root device.
Anyone an idea what is happening here?
relevant section from config:
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
Cheers,
Rudy