# Re: MD Feature Request: non-degraded component replacement

- From: Justin Piszcz \<hidden\>
- Date: 2008-12-16 23:25:28 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2008/12/6604570
- Thread: https://ratatoskr.run/linux-raid/2008/12/6604530/t.md

```text


On Tue, 16 Dec 2008, David Greaves wrote:

> Justin Piszcz wrote:
>> On Tue, 16 Dec 2008, Lars Schimmer wrote:
>>> Justin Piszcz wrote:
>>>> On Tue, 16 Dec 2008, David Greaves wrote:
>>>>> of course that's just one opinion after replacing about 20 flaky 1Tb
>>>>> drives in
>>>>> the past 6 months :)
>>>> What were the make/model of those drives, how did they fail?
>>>
>>> Far more important: how much do you have in production?
>>> AS I got roughly 15 Seagate 1 GB HDs here and not one of them failed for
>>> the last year.
>>> And 20 of 30 running is really bad, but 20 from 500 running is not as
>>> bad as it seems ;-)
>> Agree, but I would still be interested in the make/model and what
>> controller they were attached to and how they failed?
>
> This is a home environment; (MythTV doncha know).
>
> I bought 9 Samsung HD103UJ 1Tb drives in June 2008.
>
> Since June I have RMAed 5 of the original 9.
> I have then RMAed 3 of the 5 replacements.
> I have then RMAed 2 of the 3 re-replacements.
> And finally I RMAed 1 of the 2 re-re-replacements. (I think - I was confused at
> this point - I have a list of 18+ serial numbers anyway)
>
> In November (ish) Samsung did the decent thing and replaced all 9 with HE103UJ
> (enterprise) drives; no 'moaning' about using them in RAID etc.
>
> This weekend I replaced 3 of the HE models that were displaying essentially the
> same problems (all on the same machine - the vast majority of the problems were
> in this machine and, as it happens, the 3 in the md array).
> During the replication I got a real media failures.
>
> Anyhow...
>
> I am using Dell SC420 chassis (SOHO class).
> I am running 2.6.18-xen on one system, 2.6.25.4 on another. The controllers are
> cheap dual-channel Sil24 PCIe cards and the Dell onboard controller.
>
> When I found smartctl -l scttempsts I can see that peak temperature is 44C
> They are running in Dell servers in a cool environment; and previously these
> servers supported many more drives.
>
> I had one smart DMA error which I'll attribute to a transient problem with a cable.
>
> All the other 'problems' are when SMART long self tests show eg:
> 21 # 1  Extended offline    Completed: read failure       90%       424         4239
> and
>  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -
>      62
>
> I'm not aware of any OS level issues but I have had some; I've not recorded them
> as I'm taking the SMART self-test to be enough to indicate dodgy disks.
>
> I've never had any with Reallocated_Sector_Ct != 0
>
> I also note that the smart self test log does indeed show inconsistent summary
> messages:
> # 1  Short offline       Completed: read failure       20%      1236
> 1953517887
> # 2  Short offline       Aborted by host               20%      1212         -
> # 3  Short offline       Aborted by host               10%      1188         -
> # 4  Short offline       Aborted by host               10%      1164         -
>
> In fact each log shows "Completed: read failure" until the next log pushes it
> down the stack; at that point it shows "Aborted by host". The % remaining is
> key. Discussion on the smart list suggests that this is a firmware bug. (Indeed
> this is now fixed on some newer RMA replacements).
>
> Also note that the LBA failure has been different (but very similar) for each
> drive but consistent once it occurs. It often but not always goes away if I
> force (dd) a read/write of the reported sector.
>
> I am in touch with a guy at Samsung who is interested in the problem but I've
> not had any tech feedback.
>
> David
> PS Thanks to Samsungs excellent advance replacement RMA service I have been able
> to deal with these problems. No other drive maker offers this service in the UK
> AFAIK. Of course I have spent *days* just ddrescue-ing disks. But I've not had
> to use a backup yet despite *loads* of dual-drive+ failures.

Very thanks for this information, have you run other disks in the system without issue?  BTW: I have seen this with the Velociraptors as well:

> In fact each log shows "Completed: read failure" until the next log pushes it
> down the stack; at that point it shows "Aborted by host". The % remaining is
> key. Discussion on the smart list suggests that this is a firmware bug. (Inde$
> this is now fixed on some newer RMA replacements).

When a drive is about to crap out it will start doing that, it will abort the test or run forever..

I take it you are running at RAID6 with these disks?

Justin.
```
