# Re: Create Raid6 with 1 missing member fails

- From: Neil Brown \<hidden\>
- Date: 2008-02-18 04:29:53 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2008/02/6602217
- Thread: https://ratatoskr.run/linux-raid/2008/02/6602217/t.md

```text
On Sunday February 17, quackyo@start.no wrote:
> I tried to create a raid6 with one missing member, but it fails.
> It works fine to create a raid6 with two missing members. Is it supposed 
> to be like that ?

No, it isn't supposed to be like that, but currently it is.

The easiest approach if to create it with 2 drives missing, and the
extra drive immediately.
This is essentially what mdadm will do when I fix it.

Alternately you can use --assume-clean to tell it that the array is
clean.  It is actually a lie, but it is a harmless lie. Whenever any
data is written to the array, that little part of the array will get
"cleaned". (Note that this isn't true of raid5, only of raid6).

NeilBrown
```
