# Re: identifying failed disk/s in an array.

- From: David Greaves \<hidden\>
- Date: 2008-01-23 12:02:21 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2008/01/6601846
- Thread: https://ratatoskr.run/linux-raid/2008/01/6601844/t.md

```text
Tomasz Chmielewski wrote:
> Michael Harris schrieb:
>> i have a disk fail say HDC for example, i wont know which disk HDC is
>> as it could be any of the 5 disks in the PC. Is there anyway to make
>> it easier to identify which disk is which?.
> 
> If the drives have any LEDs, the most reliable way would be:
> 
> dd if=/dev/drive of=/dev/null
> 
> Then look which LED is the one which blinks the most.

And/or use smartctl to look up the make/model/serial number and look at the
drive label. I always do this to make sure I'm pulling the right drive (also
useful to RMA the drive)


David
```
