# Offtopic: hardware advice for SAS RAID6

- From: Richard Michael \<hidden\>
- Date: 2007-11-20 16:08:06 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2007/11/6601403
- Thread: https://ratatoskr.run/linux-raid/2007/11/6601403/t.md

```text
On the heels of last week's post asking about hardware recommendations,
I'd like to ask a few questions too. :)

I'm considering my first SAS purchase.  I'm planning to build a software
RAID6 array using a SAS JBOD attached to a linux box.  I haven't decided
on any of the hardware specifics.

I'm leaning toward this PCI express LSI 3801e controller:
http://www.lsi.com/storage_home/products_home/host_bus_adapters/sas_hbas/lsisas3801e/index.html

Although, Adaptec has a similar PCI-X model.

I'd probably purchase a cheap Dell rackmount 1U server (e.g. PowerEdge
860) for the controller.  It has dual Gb ethernet, which I'd channel
bond for decent network I/O performance.

The JBOD would ideally be 1U or 2U holding 8 or 10 disks.  If I
understand SAS correctly, I'd probably have a unit with 2 SFF-8088
miniSAS connectors (although, I believe these connectors only support 4
devices, so if the JBOD is >8 disks, I don't know what would happen).

I'm completely undecided on the JBOD itself; recommendations here would
be greatly appreciated.  It's a bit of a shot in the dark.

I'd appreciate feedback and suggestions on the hardware above, or a
discussion of the performance.  (E.g. a discussion of SAS
ports/bandwith, PCI express lanes/bandwidth, disks and network to
determine the through put of this setup.)

Cheers,
Richard
```
