# Re: Data corruption on software raid.

- From: Wolfgang Denk \<hidden\>
- Date: 2007-03-18 15:17:53 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2007/03/6599518
- Thread: https://ratatoskr.run/linux-raid/2007/03/6599518/t.md

```text
In message [ref] you wrote:
> 
> But what amazes me is that no media errors can be detected by doing a
> write/read check on every sector of the disk with mke2fs, and no data
> corruption occurs when moving data to the set locally!
> 
> Can anyone shed some light on what i can try next to isolate what is
> causing all this?  It's not the software raid code, the IDE set is

If it happens only with downloaded data, you may see data corruption
in the NIC hardware and/or driver. Try using another network card
(other vendor, other type).

Another possible culprit is memory - you may see memory errors  under
certain usage patterns. Make sur to run a memory test, and/or try
changing RAM.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Time is an illusion perpetrated by the manufacturers of space.
```
