# Re: raid6 array , part id 'fd' not assembling at boot .

- From: Neil Brown \<hidden\>
- Date: 2007-03-17 05:36:23 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2007/03/6599496
- Thread: https://ratatoskr.run/linux-raid/2007/03/6599496/t.md

```text
On Friday March 16, babydr@baby-dragons.com wrote:
>  	Hello All ,  I am having a dickens of a time with preparing this system 
> to replace my present one .
>  	I created a raid6 array over 6 147GB scsi drives .
>  	steps I followed were .
> 
>  	fdisk /dev/sd[c-h] ( one at a time of course )
>  	  created a partition starting at cyl 2 & -10 Cyls from the end of the drive .
>  	  typed the partion FD
>  	  w
>  	repeat until all six drives partitioned .
> 
>  	mdadm --create /dev/md3 --chunk=64 --metadata=1.2 --verbose --bitmap=internal --level=6 --raid-devices=6 --spare-devices=0 /dev/sd[cdefgh]1
>  	Built just fine .

In-kernel auto-assembly using partition type 0xFD only works for
metadata=0.90.  This is deliberate.

Don't use 0xFD partitions.  Use mdadm to assemble your array, either
via an initrd or (if it don't hold the root filesystem) via an init.d
script.

NeilBrown
```
