Can someone tell me what this means please? I just received this in
an email from one of my servers:
From: mdadm monitoring [<redacted>]
To: <redacted>
Subject: FailSpare event on /dev/md2:$HOST.$DOMAIN.com
This is an automatically generated mail message from mdadm
running on $HOST.$DOMAIN.com
A FailSpare event had been detected on md device /dev/md2.
It could be related to component device /dev/sde2.
Faithfully yours, etc.
On this machine I execute:
$ cat /proc/mdstat
Personalities : [raid5] [raid4] [raid1]
md0 : active raid1 sdf1[2](S) sde1[3](S) sdd1[4](S) sdc1[5](S) sdb1[1] sda1[0]
104320 blocks [2/2] [UU]
md1 : active raid1 sdf3[2](S) sde3[3](S) sdd3[4](S) sdc3[5](S) sdb3[1] sda3[0]
3068288 blocks [2/2] [UU]
md2 : active raid5 sdf2[4] sde2[5](F) sdd2[3] sdc2[2] sdb2[1] sda2[0]
560732160 blocks level 5, 256k chunk, algorithm 2 [5/5] [UUUUU]
unused devices: <none>
Does the email message mean drive sde2[5] has failed? I know the sde2 refers
to the second partition of /dev/sde. Here is the partition table
# fdisk -l /dev/sde
[root@elo ~]# fdisk -l /dev/sde
Disk /dev/sde: 146.8 GB, 146815733760 bytes
255 heads, 63 sectors/track, 17849 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 * 1 13 104391 fd Linux raid autodetect
/dev/sde2 14 17465 140183190 fd Linux raid autodetect
/dev/sde3 17466 17847 3068415 fd Linux raid autodetect
I have partition 2 of drive sde as one of the raid devices for md. Does the (S)
on sde3[2](S) mean the device is a spare for md1 and the same for md0?
Mike