# Re: libata hotplug and md raid?

- From: Turbo Fredriksson \<hidden\>
- Date: 2006-09-14 11:44:46 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2006/09/6598455
- Thread: https://ratatoskr.run/linux-raid/2006/09/6598455/t.md

```text
>>>>> "Tejun" == Tejun Heo [ref] writes:

    Tejun> Would it be better for md to listen to
    Tejun> hotplug events and auto-remove dead devices or is it
    Tejun> something which belongs to userland?

From my perspective (User+Admin), I'd _very much_ like to have
(physically) removed disks be removed by md.

This would greatly help me when a disk fails on any of my systems.
They are all SPARC's (with a few x86). None of which have any
monitor attached. The x86's have, but that monitor is a couple of
hundred meters away...

So when I change drive, I first have to telnet into the terminal
switch port for that machine, do the mdadm commands. Then physically
change the drive. Then back to a machine and telnet back in to the
machine and hot-add the disk....

Granted, it don't take that much time, but it's a couple of extra
steps (literally :) that I'd prefer not to do/take...
-- 
supercomputer toluene Mossad Semtex assassination Noriega Rule Psix
cryptographic critical NORAD terrorist killed fissionable Marxist
genetic
[See http://www.aclu.org/echelonwatch/index.html for more about this]
[Or http://www.europarl.eu.int/tempcom/echelon/pdf/rapport_echelon_en.pdf]
If neither of these works, try http://www.aclu.org and search for echelon.
Note. This is a real, not fiction.
http://www.theregister.co.uk/2001/09/06/eu_releases_echelon_spying_report/
http://www.aclu.org/safefree/nsaspying/23989res20060131.html#echelon
```
