hello all, first message to this group.
Ive recently created a 3 disk raid5 using mdadm. file copy to this
array fails consistently after a few gigs. the array does not die
completely, but rather it is marked readonly.
I created the array on 3 disks of equal partition size with:
sudo mdadm /dev/md0 --create -l5 --raid-devices=3 /dev/sda1 /dev/sdb1 /dev/sdc1
then formatted with:
mkfs.ext3 /dev/md0
badblocks shows no error on any of the drives.
dyssident@newdeal:~$ cat /proc/mdstat
Personalities : [raid5]
md0 : active raid5 sda1[0] sdb1[2] sdc1[1]
234436352 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
unused devices: <none>
dyssident@newdeal:~$ dmesg
[17180879.388000] EXT3 FS on md0, internal journal
[17180879.392000] EXT3-fs: mounted filesystem with ordered data mode.
[17181702.872000] EXT3-fs error (device md0): ext3_new_block:
Allocating block in system zone - block = 38993924
[17181702.872000] Aborting journal on device md0.
[17181702.952000] __journal_remove_journal_head: freeing b_committed_data
[17181702.956000] EXT3-fs error (device md0) in ext3_prepare_write:
Journal has aborted
[17181702.960000] ext3_abort called.
[17181702.960000] EXT3-fs error (device md0): ext3_journal_start_sb:
Detected aborted journal
[17181702.960000] Remounting filesystem read-only
im stumped, any ideas?
thanks much,
alan