raid5, 4 sata disks, slackware with 2.6.14.6.
Yesterday the machine hung, so I used MagicKey to sync, remount read only and
reboot.
After that the third disk was not assembled into the array.
dmesg came up with:
[ 34.652268] md: md0 stopped.
[ 34.742673] md: bind<sdb1>
[ 34.742900] md: invalid superblock checksum on sdc1
[ 34.742920] md: sdc1 has invalid sb, not importing!
[ 34.742941] md: md_import_device returned -22
[ 34.743257] md: bind<sdd1>
[ 34.743464] md: bind<sda1>
[ 34.743506] raid5: device sda1 operational as raid disk 0
[ 34.743524] raid5: device sdd1 operational as raid disk 3
[ 34.743542] raid5: device sdb1 operational as raid disk 1
[ 34.744128] raid5: allocated 4195kB for md0
[ 34.744146] raid5: raid level 5 set md0 active with 3 out of 4 devices, alg
orithm 2
[ 34.744173] RAID5 conf printout:
[ 34.744187] --- rd:4 wd:3 fd:1
[ 34.744202] disk 0, o:1, dev:sda1
[ 34.744216] disk 1, o:1, dev:sdb1
[ 34.744231] disk 3, o:1, dev:sdd1
So after throwing a minor fit (my first degraded array) I started
investigating options. Whe I was sure the disk was alright I re-added it and
resyncing started.
It's currently still at it.
Question: what happened to that superblock? just because it didn't shut down
properly? Disk seems to be ok.
--
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS d--(+)@ s-:+ a- C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-
w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@
b++(+++) DI+++ D- G++ e* h>++ r* y?
------END GEEK CODE BLOCK------
http://www.stop1984.com
http://www.againsttcpa.com