# Re: Converting Ext3 to Ext3 under RAID 1

- From: Michael Tokarev \<hidden\>
- Date: 2006-08-03 07:50:24 
- List: linux-raid
- Page: https://ratatoskr.run/linux-raid/2006/08/6597984
- Thread: https://ratatoskr.run/linux-raid/2006/07/6597920/t.md

```text
Paul Clements wrote:
>>    Is 16 blocks a large enough area?
> 
> Maybe. The superblock will be between 64KB and 128KB from the end of the
> partition. This depends on the size of the partition:
> 
> SB_LOC = PART_SIZE - 64K - (PART_SIZE & (64K-1))
> 
> So, by 16 blocks, I assume you mean 16 filesystem blocks (which are
> generally 4KB for ext3). So as long as your partition ends exactly on a
> 64KB boundary, you should be OK.
> 
> Personally, I would err on the safe side and just shorten the filesystem
> by 128KB. It's not like you're going to miss the extra 64KB.

Or, better yet, shrink it by 1Mb or even 10Mb, whatever, convert
to raid, and - the point - resize it to the max size of the raid
device (ie, don't give "size" argument to resize2fs).  This way,
you will be both safe and will use 100% of the available size.

/mjt
```
